Thomas Eichinger
6bbc4ca226
shell: provide shell commands to poll lsm303dlhc sensor
2014-11-06 11:28:22 +01:00
Hauke Petersen
4555b9ea7a
board/iot-lab_M3: added definitions for L3G4200D
2014-11-06 10:36:22 +01:00
Oleg Hahm
18b32f4fcd
iot-lab_M3: complement stdio documentation
2014-11-05 20:21:49 +01:00
Oleg Hahm
ba291cc1f9
iot-lab_M3: don't overwrite a custom baud rate
2014-11-05 20:21:49 +01:00
Oleg Hahm
d518c07135
iot-lab_M3: set baud rate to 500 kbaud
...
The IoT-Lab testbed requires a baud rate of 500 kbaud to use UART.
Hence, this commit sets the default baud rate to this value and adapt
the `make term` target accordingly.
2014-11-05 20:19:21 +01:00
Hauke Petersen
d396f1f0c2
board/iot-lab_M3: configured GPIOs correctly
2014-11-05 16:15:15 +01:00
Thomas Eichinger
88fce936e9
lsm303dlhc: initial import of lsm303dlhc driver
...
TODO: Accelerometer does not return valid values yet
2014-11-05 13:04:47 +01:00
Hauke Petersen
d372d50f5e
board/iot-lab_M3: added I2C ISR defines
2014-11-04 21:07:14 +01:00
BytesGalore
fc56535dd3
boards: add extern "C" to header files
2014-10-31 11:27:59 +01:00
Oleg Hahm
3c0d91720b
Revert "boards: introduced a HAS_RADIO define"
...
This reverts commit 4238f40429
2014-10-30 23:13:52 +01:00
Hauke Petersen
d31ed0f85b
board/iot-lab_M3: added interface for LPS331AP
2014-10-30 20:24:51 +01:00
Oleg Hahm
4238f40429
boards: introduced a HAS_RADIO define
2014-10-30 17:52:37 +01:00
Oleg Hahm
31b83e8753
doc: rename iot-lab_M3 group name
2014-10-23 20:53:00 +02:00
Oleg Hahm
481d4f2ee3
doc: fix ambiguous file name warnings
...
doxygen does a good job itself, identifying the unique part of the path
to identify a file.
2014-10-23 20:53:00 +02:00
Hauke Petersen
c4d908b66b
board/iot-lab_M3: added ISL29020 interface defs
2014-10-15 14:54:07 +02:00
Hauke Petersen
2c1d65efd5
board/iot-lab_M3: added I2C device definitions
2014-10-15 14:50:19 +02:00
Thomas Eichinger
19db6ded85
cpu/stm32f1:board/iot-lab_M3: fix and cleanup for GPIO low level driver
2014-10-10 11:42:08 +02:00
Thomas Eichinger
a16d326bf0
stm32f1: implement RTT driver
2014-10-09 11:13:06 +02:00
Thomas Eichinger
fccfce2d59
stm32f1: implement 32bit hwtimer by cascading two timers
2014-10-01 20:54:14 +02:00
Hauke Petersen
25c891ecdd
Merge pull request #1736 from haukepetersen/fix_stm32f1_somecleanup
...
board/iot-lab_M3: cleanup of SPI and radio driver
2014-09-30 12:02:42 +02:00
Hauke Petersen
a990217a54
board/iot-lab_M3: added clock config to periph_conf
2014-09-30 11:26:00 +02:00
Hauke Petersen
ae066f60d8
board/iot-lab_M3: cleanup of AT86RF231 driver
...
- removed board specific code
- added interface definitions to board.h
2014-09-30 11:19:23 +02:00
Hauke Petersen
af1e012efc
board/iot-lab_M3: cleaned up SPI in periph_conf.h
2014-09-30 11:19:16 +02:00
Thomas Eichinger
d0b0af6d81
stm32f*: rename STDIO buffer and enable getchar with UART0
2014-09-26 14:16:59 +02:00
Thomas Eichinger
c83e4cb361
stm32f1: unify UART0 use
2014-09-26 14:16:59 +02:00
Christian Mehlis
a6ff40b6d7
iot-lab_M3: fix numof uart
2014-09-19 17:12:38 +02:00
Thomas Eichinger
0e79a01cd2
stm32f1: SPI: implement speed setting properly
2014-08-21 17:53:38 +02:00
Thomas Eichinger
c28aebf105
at86rf231: handle rx tx state changes correctly
2014-08-21 17:53:38 +02:00
Thomas Eichinger
aaa2c2e8ba
boards: initial import of iot-lab_M3
2014-08-21 17:53:37 +02:00
Thomas Eichinger
37611db41c
cpu: initial import of stm32f1
2014-08-21 17:53:37 +02:00
