CFLAGS_CPU is required for 'pkg/openthread'. So declare it as a global
compilation variable.
The goal is to move the export to `makefiles/vars.inc.mk` and remove the
local exports that could be in boards/cpu/arch.
Add a variable for `pyterm` specific flags that are not handled by other
terminals.
This will prevent issues with boards that have options only supported by
`pyterm` and setting `pyterm` options from the environment.
Rename TMP006 to TMP00x
Add TMP007 sensor support to TMP00X
Change uint8_t reg to uint16_t
Add to doxygen documentation group
Expose compile time configurations
Move defines from .c to .h
Change double to float, because double is not needed
Add TMP007 register information
The value must be saved from the original value to allow restoring it.
This has currently no impact on 'info-boards-supported' as it is
currently ignored.
By default if a test is available and not blacklisted it will be run by
murdock.
This will move from a whitelisting everything that works, to
blacklisting what fails. This way, failing tests will be easier to
track instead of being silently just not run.
It could even allow introducing failing tests before a fix is available.
Only set `TEST_ON_CI_ENABLED` if the application has tests.
Currently `TEST_ON_CI_WHITELIST` was only set if there were tests.
This is a pre-step to have `TEST_ON_CI_WHITELIST` being `all` by
default.
The cc110x driver has been re-written from scratch to overcome the limitations
of the old driver. The main motivation of the rewrite was to achieve better
maintainability by a detailed documentation, reduce the complexity and the
overhead of the SPI communication with the device, and to allow to
simultaneously use transceivers with different configuration regarding the used
base band, the channel bandwidth, the modulation rate, and the channel map.
Features of this driver include:
- Support for the CC1100, CC1101, and the CC1100e sub-gigahertz transceivers.
- Detailed documentation of every aspect of this driver.
- An easy to use configuration API that allows setting the transceiver
configuration (modulation rate, channel bandwidth, base frequency) and the
channel map.
- Fast channel hopping by pre-calibration of the channels during device
configuration (so that no calibration is needed during hopping).
- Simplified SPI communication: Only during start-up the MCU has to wait
for the transceiver to be ready (for the power regulators and the crystal
to stabilize). The old driver did this for every SPI transfer, which
resulted in complex communication code. This driver will wait on start up
for the transceiver to power up and then use RIOT's SPI API like every other
driver. (Not only the data sheet states that this is fine, it also proved to
be reliable in practise.)
- Greatly reduced latency: The RTT on the old driver (@150 kbps data rate) was
about 16ms, the new driver (@250 kbps data rate) has as RTT of ~3ms
(depending on SPI clock and on CPU performance) (measured with ping6).
- Increased reliability: The preamble size and the sync word size have been
doubled compared to the old driver (preamble: 8 bytes instead of 4,
sync word: 4 byte instead of 2). The new values are the once recommended by
the data sheet for reliable communication.
- Basic diagnostic during driver initialization to detect common issues as
SPI communication issues and GDO pin configuration/wiring issues.
- TX power configuration with netdev_driver_t::set() API-integration
- Calls to netdev_driver_t::send() block until the transmission has completed
to ease the use of the API (implemented without busy waiting, so that the
MCU can enter lower power states or other threads can be executed).
This allows passing other arguments as environment variables in
DOCKER_ENVIRONMENT_CMDLINE and as command line override in
DOCKER_OVERRIDE_CMDLINE without using the automatic detection.
This will allow passing USEMODULE to docker as its value is usually set
in an application Makefile so has its origin changed.
This allows setting other variables that should be exported to the
docker build.
As for other variables, they must still be unmodified before parsing
`docker.inc.mk` to be exported.
The value must be saved from the original value to allow restoring it.
This has currently no impact as 'makefiles/defaultmodules.inc.mk'
and 'DISABLE_MODULE' are ignored in this parsing.
This remove executing buildtest `for` loop in docker.
When building completely in docker, 'buildtest' would hide issues when
the host toolchain would be used when doing `make all` directly.
It has the consequence that it now starts a container for each
compilation which is slower.
The previous behavior can be reproduced by using
BUILD_IN_DOCKER=1 make buildtest-indocker
A side effect is also that now `BUILDTEST_MAKE_REDIRECT` would work when
doing `buildtest` with docker.
Add a 'buildtest-indocker' that forces executing 'buildtest' for loop
completely inside the container.
It prevents starting one container per compilation wich is slower but
it could hide errors where the host toolchain would be used
It is currently equivalent to `buildtest` but will change when the
`buidtest` handling will be move outside of `BUILD_IN_DOCKER`.
Display an error when executed without BUILD_IN_DOCKER=1.
Move git version evaluation to a separate file.
The definition has been updated it to a deferred only definition.
This way git is not called when GIT_VERSION is not used.
Document `BINFILE` in the same ways as `HEXFILE`.
The file does not need to be exported so no reason to do it though.
It also adds it in the `info-build` output in the same way as `HEXFILE`.
Previously, this was hard-coded to allow one file, hard-coded to be
called "flash file".
This commit allows multiple files to be specified via adding them to the
TEST_EXTRA_FILES variable. All files will be stored in the worker's
application bin directory.
Also, the existence check has been removed, as dwqc bails out on missing
file anyways.
... if the riotboot feature is used.
Previously, even an application that had "FEATURES_REQUIRED += riotboot"
set would still flash the non-riotboot binary on "make flash".
This is usualy not what the user wants.
This commit set's the FLASHFILE variable to the combined "riotboot
bootloader + slot0 + empty slot1" binary. This has the effect that make
all, flash and flash-only will compile and/or flash a working riotboot
setup.
tests/riotboot and tests/riotboot_flashwrite now default to flashing the
riotboot-extended binary. tests/riotboot was previously configured to
use the riotboot-combined binary. This has been changed in order to not
behave differently than how usual riotboot applications do.
Introduce a variable to set that a test is blacklisted.
This is a move toward enabling tests by default and adding a blacklisting
reason instead for a board instead of not whitelisting them which hides
the problem.
Currently, a test should be both whitelisted and blacklisted at the same
time to have a meaning. It is planned to whitelist all by default in
an upcoming pull request.
Refactor the handling to use a variable to store if a test is enabled.
Add a 'test-on-ci-enabled' target that test if the test on ci is enabled.
This is a first commit before changing the behavior.
Currently sam0 will always use OpenOCD, even when the JLink programmer is selected.
Instead, use JLinkExe when it's availiable and a J-Link programmer is used.
Evaluate BOARDS only once before going in all directories.
This uses the target specific 'export BOARDS ?=' to export the variable
with its value without evaluating during parsing.
* Add a variable to list all boards without using 'find'.
* By default 'BOARDS' is the list of all boards.
* Add the 'info-boards' target that lists BOARDS.
* Use in RIOT/Makefile
This variable is only used for the term recipe (and maybe for flashing). They
should not be evaluated if they are not needed and the user should not see a
warning that the port is not set if he does not use port (for example in make
all.)
Rational: the periph_common module is required by (most) other periph drivers
and also during startup of the CPU/MCU to run periph_init. The latter is only
required if other periph drivers are used, hence periph_common should be a
depency of periph_* modules and *not* of the CPU/MCU. This PR fixes that
by making periph_common a depency of periph_* and removing the explicit
include in the CPU/MCU implementation.
Put the definition of `FEATURES_USED` in common and use the variable
instead of duplicating code.
This required defining 'FEATURES_OPTIONAL_ONLY|USED' to not overwrite
the value of 'FEATURES_OPTIONAL' as was done before.
Also add 'FEATURES_OPTIONAL_MISSING' to list optional features that were
not included as not provided.
This removes the need to print FEATURES_MISSING with the optional
features too.
Update the FEATURES_OPTIONAL meaning to be more in line since
FEATURES_USED is defined. Handle FEATURES_OPTIONAL as a configuration from
the BSP/build that should not be changed anymore after.
`FEATURES_OPTIONAL` are by definition optional so are not supposed to
cause a build to fail.
Only the 'REQUIRED' ones that are not 'PROVIDED' are 'MISSING'.
* Do not change FEATURES_OPTIONAL to remove REQUIRED features
* Prepare for having a different variable for the previous value
* Update dependency resolution/info-build as FEATURES_OPTIONAL cannot be missing
When '$(PREFIX)objdump' is not present fallback to native '(g)objdump'.
'objdump' is used when flashing for some boards but the toolchain may
not be installed when building in docker.
This will allow using 'objdump' in 'cpu/kinetis/dist/check-fcfield.sh'.
To read float number from stdin, add "-u scanf_float"
option to the linker.
This option is setup using a pseudomodule as it is already done for
printf_float.
Just add to your Makefile:
USEMODULE += scanf_float
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
DEBUGGER/DEBUGGER_FLAGS/DEBUGSERVER/DEBUGSERVER_FLAGS are evaluated by the
main Makefile.include or by file included by it.
Their value does not need to be exported.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `55 insertions(+), 55 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
RESET and RESET_FLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for RESET_FLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `24 insertions(+), 24 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
FLASHER and FFLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for FFLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `84 insertions(+), 84 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
This will allow sharing it between Makefile.include and
makefiles/info-global.inc.mk.
Also some common variables definition can also be moved to here.
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
This enables "BUILD_IN_DOCKER=1 BOARDS='foo bar' make buildtest".
Without this line, when executed with BUILD_IN_DOCKER, "make buildtest"
would always build all boards.
Add a trivial shell program that scans for all slaves on an I2C bus by iterating
all of the possible 127 I2C addresses and checking for the ACK of the device.
The build system contains several instances of
INCLUDES += -I$(RIOTBASE)/sys/posix/include
This is bypassing the module management system, by directly accesing
headers without depending on a module. The module is the posix module.
That line is also added when one of the posix_* modules is requested.
According to the docs, the posix module provides headers only, but in
reality there is also inet.c.
This patch:
- Moves `inet.c` into `posix_inet`, leaving `posix` as a headers-only
module.
- Rename `posix` as `posix_headers` to make it clear the module only
includes headers.
- Makes `posix_*` modules depend on `posix_headers`, thus removing the
explicit `INCLUDES+=...` in `sys/Makefile.include`.
- Ocurrences of `INCLUDES+=...` are replaced by an explicit dependency
on `posix_headers`.
In UniFlash 4.4.0 the directory where 'xds110reset' is changed.
Try to use the newest one available. If none is found in UNIFLASH_PATH,
try to use one from the PATH to be sure to have a value.
./uniflash_4.1/simplelink/gen2/bin/xds110reset
./uniflash_4.3.0/simplelink/gen2/bin/xds110reset
./uniflash_4.4.0/simplelink/imagecreator/bin/xds110reset
./uniflash_4.5.0/simplelink/imagecreator/bin/xds110reset
Linkerscript for `nrf52dk` has been updated to use `cortexm.ld` so does
not need the configuration anymore for the removed
`cpu/nrf52/ldscripts/nrf52832xxaa.ld`.
JLink flasher used by the only supported board `nrf52dk` has been updated.
FLASHFILE must now be defined by the board to use this in case a new one
wants to be supported.
Refactor to define REALMODULES incrementally without overwriting
'NO_PSEUDOMODULES'.
This also allows an external makefile to maybe add something there if it really
needs to.
Factorize the reused value in a private variable.
I define it private as somehow 'USEPKG' is supposed to be removed so the
variables can be removed later.
BASELIBS is used only in the main Makefile.include or included files.
As it is not used in sub make executions or scripts it does not need to
be exported.
The canned recipe is preferred to using $(FLASHER) $(FFLAGS) as it
allows to specify additional action actions (like what preflash is
currently doing.)
A canned recipe had previously been defined to perform the flashing
procedure. The canned recipe is preferred to calling $(FLASHER) $(FFLAGS)
as there might be additional steps involved in flashing (this is handled by
preflash currently but with the canned recipe we will be able to fix it.)
Modern versions of GDB support multiple targets with the same gdb binary.
At least Ubuntu and Debian have dropped the gdb-arm-none-eabi package in favour
of gdb-multiarch.
Here, no $(PREFIX)-gdb binary is availiable, instead gdb-multiarch should be used.
This patch tries to automatically detect the presense of gdb-multiarch and uses it
instead of arm-none-eabi-gdb.
