MrKevinWeiss
e0fdc3c16c
*Kconfig*: Modify Kconfig to remove dep model
2024-03-27 10:28:12 +01:00
Gerson Fernando Budke
3b9368a99e
cpu/avr8: Enable PM periph to all SoC
...
This refactor the current xmega PM peripheral to avr8 common and extend
PM to cpus families.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2023-12-01 14:12:23 +01:00
Marian Buschsieweke
04ab5a74f3
cpu/atmega_common: implement periph/gpio_ll{,_irq}
...
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
2022-05-02 14:44:55 +02:00
Marian Buschsieweke
62d6a560b1
cpu/avr8_common: Fix link with binutils > 2.35.2
...
The xfa.ld script is incompatible with binutils > 2.35.2 and results
in firmwares that wont boot. Sadly, I couldn't figure out an elegant
way to fix the issue. Instead, I modified the linker script provided
by binutils to also include XFA.
2021-10-13 16:37:19 +02:00
Benjamin Valentin
236c4db83e
cpu/atmega*: drop ldscripts_compat
...
Those were only needed with very old toolchains.
These days they cause more confusion than benefit, so drop them.
2021-01-22 19:05:20 +01:00
Benjamin Valentin
96273b4df0
cpu/atmega_common: use TIMER_CHANNEL_NUMOF
2020-06-24 00:45:35 +02:00
Leandro Lanzieri
a5dedf3c91
cpu/atmega1284p: Add Kconfig symbols
2020-06-22 17:08:59 +02:00
Marian Buschsieweke
044a3f9a4c
cpu/atmega1284p: Relocate default timer config
2020-05-28 16:27:07 +02:00
fc4eeb3e28
cpu/atmega1284p: fix typos
2019-11-23 22:39:35 +01:00
629003d042
cpu/atmega: cleanup dependencies handling
2019-10-18 12:40:34 +02:00
Robert Hartung
eeb895fd4e
cpu/atmega1284p: pin change interrupts
2019-08-01 09:35:35 +02:00
Gaëtan Harter
40e7dd3e6b
cpu/atmega*/ldscripts_compat: add command to generate ldscript
...
Add the command to generate the ldscript in the documentation.
It was only in the commit message before and had a typo 's/--mmcu/-mmcu/'.
2019-06-03 16:11:19 +02:00
Francisco Acosta
b2fc9b197e
cpu/atmega*: remove unnecessary code (already factored out)
...
cpu.c and startup.c were redundant in most platforms, except for
atmega256rfr2. The common code is now in cpu/atmega_common/cpu.c
and cpu/atmega_common/startup.c. cpu_conf.h is also removed as
it's now in cpu/atmega_common/include thus shared by all atmega
based platforms.
2018-11-02 16:23:48 +01:00
Francisco Acosta
4f28407af8
cpu/atmega_common: use the same cpu_conf for all atmega based boards
...
Removes redundancy of code since all the boards were defining
the same variables. Moreover, the stack sizes are unified per
architecture, as required.
2018-11-02 16:23:48 +01:00
cladmi
e4635004f7
cpu/atmega1284p: configure RAM and ROM length
...
Info taken from https://www.microchip.com/wwwproducts/en/atmega1284p
TODO: update "board not enough memory".
2018-09-05 12:20:31 +02:00
Gaëtan Harter
56a1ac4f2b
cpu/atmega: add avr-binutils 2.26 linkerscripts
...
Generated by extracting the output of
avr-gcc -Wl,--verbose --mmcu=$(CPU)
With avr-binutils 2.26
2018-09-05 12:08:33 +02:00
Francisco Acosta
8776df7423
cpu/atmega*: move EEPROM definitions to periph_cpu.h
2018-08-15 15:27:03 +02:00
Francisco Acosta
1aed925ca8
Merge pull request #8951 from ZetaR60/RIOT_atmega_ext_int_clarity
...
cpu/atmega_common: external interrupt fix and refactor
2018-05-30 16:33:34 +02:00
Matthew Blue
327bf09d20
cpu/atmega1284p: external interrupt refactor
2018-05-29 11:24:15 -04:00
f3c3818fa7
cpu/atmega*: configure eeprom
2018-05-24 14:07:55 +02:00
Matthew Blue
a55921394c
cpu/atmega1284p: Initial ATmega1284P support
2018-03-25 14:24:37 -04:00
