28b558ec2d
Merge pull request #14228 from keestux/fix-test-cond-order
...
tests/cond_order: refactor the test to avoid knowing the thread IDs
2020-06-09 21:13:03 +02:00
Francisco
d58c29d06f
Merge pull request #14238 from kaspar030/disable_tests/netstats_l2_for_esp32
...
tests/netstats_l2: disable test run for esp32-wroom-32
2020-06-09 18:15:35 +02:00
85a385e6d4
Merge pull request #14227 from kaspar030/dummy_thread
...
sys/test_utils/dummy_thread: initial commit
2020-06-09 17:34:50 +02:00
1ed0d659ed
Merge pull request #13320 from bergzand/pr/stdio/semihosting
...
stdio_semihosting: Initial include of Semihosting-based STDIO
2020-06-09 16:52:44 +02:00
Francisco
6c65fa72d7
Merge pull request #14204 from kaspar030/rename_native_trace
...
cpu/native: rename trace -> backtrace
2020-06-09 16:37:26 +02:00
Kees Bakker
765c216f6d
tests/cond_order: refactor the test to avoid knowing the thread IDs
...
When CDC ACM is used as stdio the first thread in the test may have a
different ID than #3 . The test code will now look at the printed thread
information (id, prio) as they are created. This avoids the need for a
table with ID/prio.
2020-06-09 16:29:32 +02:00
135b7d0d43
tests/netstats_l2: disable test run for esp32-wroom-32
2020-06-09 13:41:09 +02:00
2be5cd50f6
tests/test_tools: include dummy_thread
2020-06-09 13:25:14 +02:00
11ee5ff2cf
stdio_semihosting: Add shell-based test application
2020-06-09 10:15:49 +02:00
3e39eb851b
Merge pull request #14181 from keestux/fix-test-thread-flood
...
tests/thread_flood: account for all threads already in use
2020-06-08 17:18:06 +02:00
Kees Bakker
bbd7c435c7
tests/thread_flood: use sched_num_threads to know the first thread ID
...
Before there were only two: "main" and "idle". But now there can also be
a thread for "usbus". The code will now use sched_num_threads and it
subtracts that number from MAXTHREADS.
This resolves issue #14180
2020-06-08 11:22:04 +02:00
Kees Bakker
de31aadf0d
tests/periph_uart_nonblocking: relax time requirement a bit
...
With SAMD21 + CDC ACM the test reports
== printed in 2103454/2100000 µs ==
Which failed to match the requirement of <1.0015.
This commit relaxes the requirement to <1.002
2020-06-07 16:48:55 +02:00
benpicco
cb11b2d33f
Merge pull request #14198 from maribu/wemos-zero
...
boards: Add support for the wemos-zero board
2020-06-05 17:55:43 +02:00
Marian Buschsieweke
8ae3e5c29f
tests/bench_xtimer: Add wemos-zero, serpente to LOW_MEMORY_BOARDS
2020-06-05 17:19:50 +02:00
Ken Bannister
f8dfa52b2d
Merge pull request #14075 from mjurczak/bugfix/nanocoap-token-overflow
...
nanocoap: bugfix token overflow
2020-06-04 22:01:18 -04:00
Leandro Lanzieri
f708571617
tests/kconfig_features: Add out.config as dependency for features check
2020-06-04 15:31:40 +02:00
9210017a52
tests: rename tests/trace -> tests/backtrace
2020-06-04 14:37:41 +02:00
benpicco
3a1ee4983c
Merge pull request #14010 from benpicco/at86rf215-mr-ofdm
...
drivers/at86rf215: implement MR-OFDM
2020-06-03 16:39:04 +02:00
Benjamin Valentin
8a63ca5088
tests/driver_at86rf215: update Makefile.ci
...
With the added features, the driver doesn't fit onto those
ATmega boards anymore.
2020-06-03 15:58:50 +02:00
Kevin "Tristate Tom" Weiss
972d9441ce
Merge pull request #13404 from leandrolanzieri/pr/boards/samr21-xpro/features_kconfig
...
boards/samr21-xpro: Model features in Kconfig
2020-06-03 09:39:41 +02:00
Leandro Lanzieri
7262b1d4d9
Merge pull request #14126 from akshaim/Kconfig_tcp
...
gnrc/tcp : Expose configurations to Kconfig
2020-06-03 08:32:26 +02:00
Jose Alamos
6ef44dcb74
tests/Kconfig: add samr21-xpro to whitelist
2020-06-02 17:42:17 +02:00
Jose Alamos
c39f94ba88
tests/kconfig: add features check
2020-06-02 17:42:17 +02:00
Akshai M
611231cc3c
tests/gnrc_tcp/ : Set 'CONFIG_' if not Kconfig
...
Set CONFIG_GNRC_TCP_MSL and
CONFIG_GNRC_TCP_CONNECTION_TIMEOUT_DURATION if not set via Kconfig
2020-06-02 15:46:44 +05:30
Akshai M
0b3e0de03e
gnrc/tcp : Move GNRC_TCP_MSL to 'CONFIG_'
2020-06-02 15:46:44 +05:30
Akshai M
01dd8e4fa8
gnrc/tcp : Move GNRC_TCP_CONNECTION_TIMEOUT_DURATION to 'CONFIG_'
2020-06-02 15:46:44 +05:30
8ed6f18ee8
tests/periph_rtt: fix invalid RTT_FREQUENCY set for non stm32f1
2020-05-30 19:07:50 +02:00
Benjamin Valentin
96a3e91c3d
tests/periph_timer_periodic: add test for periodic timer
2020-05-28 17:37:42 +02:00
Martine Lenders
a38428b8f2
Merge pull request #13701 from miri64/lwip_sock/enh/recv_buf
...
lwip_sock: provide implementation for `sock_*_recv_buf()`
2020-05-26 21:33:09 +02:00
b44b8201df
Merge pull request #14134 from benpicco/drivers/edbg_eui
...
drivers/edbg_eui: add driver to get MAC address from Atmel EDBG
2020-05-26 11:36:18 +02:00
Benjamin Valentin
616ebf9cfb
drivers/edbg_eui: add driver to get MAC address from Atmel EDBG
...
The EDBG debugger on the `samr21-xpro` contains a unique 64 bit address
intended to be used as a MAC address for the internal radio.
This adds a driver to read that EUI-64 from the debugger, it should match
with the MAC address printed on the label on the board.
2020-05-26 10:44:11 +02:00
Maciej Jurczak
edf016a6cb
nanocoap: Added token length validation.
...
Implemented a check in coap_parse() to verify if TKL value is within valid range as specified by RFC7252. The token length must be within 0-8 range, any other value should be considered as invalid and the packet should produce message format error.
A test case was added to tests-nanocoap.c to verify correct behavior in case of TKL in range and out of range.
Update sys/net/application_layer/nanocoap/nanocoap.c
Prefixed debug message with module name and abbreviations expanded.
Co-authored-by: Martine Lenders <mail@martine-lenders.eu>
Update sys/net/application_layer/nanocoap/nanocoap.c
Prefixed debug message with module name and abbreviations expanded.
Co-authored-by: Martine Lenders <mail@martine-lenders.eu>
2020-05-25 22:44:50 +02:00
00bca8c57d
tests/buttons: remove unused xtimer dependency
2020-05-25 18:14:41 +02:00
Martine Lenders
0ba2df9b4e
Merge pull request #7271 from haukepetersen/add_phydat_tojson
...
sys/phydat: added phydat to JSON converter
2020-05-22 09:08:18 +02:00
ba20272fb3
Merge pull request #14108 from benpicco/tests/periph_spi-enhance
...
tests/periph_spi: add benchmark for acquire / release
2020-05-20 20:18:40 +02:00
Benjamin Valentin
a57bd08a11
tests/periph_spi: add benchmark for acquire / release
2020-05-20 19:34:07 +02:00
Leandro Lanzieri
2a8d6920e6
Merge pull request #13989 from akshaim/Kconfig_tmp00x_1
...
drivers/tmp00x : Expose Configurations to Kconfig
2020-05-20 17:48:18 +02:00
Benjamin Valentin
1178c82a98
tests/periph_spi: introduce _xtimer_diff_usec()
...
Don't repeat yourself.
2020-05-20 17:48:15 +02:00
Akshai M
94d6b898fc
drivers/tmp00x : Add CONFIG_
...
Add CONFIG_ prefix to compile configurations
2020-05-20 19:09:48 +05:30
Hauke Petersen
3c07a3f751
tests: added unittests for phydat
2020-05-20 15:29:24 +02:00
benpicco
70543bba1d
Merge pull request #13275 from miri64/gnrc_ipv6_ext_opt/feat/initial
...
gnrc_ipv6_ext_opt: initial import
2020-05-20 14:35:58 +02:00
Martine S. Lenders
f6bd0705a1
tests: provide tests for gnrc_ipv6_ext_opt
2020-05-20 12:34:04 +02:00
ae88f1e079
Merge pull request #14102 from MrKevinWeiss/pr/test/spi/defaultcs
...
tests/periph_spi: Expose default SPI CS pins
2020-05-20 12:09:06 +02:00
benpicco
e7bf1ef706
Merge pull request #13654 from benpicco/serpente-r2
...
boards/serpente: add serpente board
2020-05-20 11:31:40 +02:00
MrKevinWeiss
867df82ced
tests/periph_spi: Expose default SPI CS pins
...
Expose the option to use default cs pins defined as DEFAULT_SPI_CS_PORT and DEFAULT_SPI_CS_PIN.
This is used if a wiring environment is already defined.
CFLAGS can be used to define the CS pin from the environment provided allowing easier automation of tests.
2020-05-20 10:44:57 +02:00
Benjamin Valentin
cddb929d0c
boards/serpente: add serpente board
...
See https://serpente.solder.party
2020-05-20 10:39:38 +02:00
benpicco
f3dddd6127
Merge pull request #14068 from miri64/sock_util/enh/netif-str2ep
...
sock_util: add interface descriptor parsing to str2ep
2020-05-19 23:59:32 +02:00
benpicco
fbad1dff01
Merge pull request #14087 from bergzand/pr/tests/periph_spi/add_thread_time
...
tests/periph_spi: Add thread runtime stats
2020-05-19 16:37:54 +02:00
Martine S. Lenders
991c2e9ec4
tests/unittests: amend sock_util tests for interface parsing
2020-05-19 14:57:41 +02:00
b3cb03ae90
tests/periph_spi: Fix column alignment
2020-05-19 14:21:20 +02:00
