Vincent Dupont
e6ca1af19a
Merge pull request #6925 from OTAkeys/pr/tja1042
...
can: add tja1042 transceiver driver
2018-01-18 09:44:51 +01:00
Vincent Dupont
cf34161789
tja1042: add driver for tja1042 CAN transceiver
2018-01-18 09:27:10 +01:00
Hyungsin
a0587ca306
drivers/pulse_counter: initial implementation
2018-01-17 06:28:13 -08:00
steffen
1d38c7d939
drivers/lc709203f: Added support for the LC709203F Fuel Gauge
2018-01-15 17:48:27 +01:00
Martine Lenders
9c1b6bd8c4
Merge pull request #8304 from PeterKietzmann/pr_drivers_kw2x_txbusy
...
drivers/kw2xrf: finish ongoing transmission before sending next frame
2018-01-09 16:59:03 +01:00
2f4a7e28e9
Merge pull request #8268 from miri64/slipdev/enh/simplify-byte-unstuffing
...
slipdev: simplify and solidify byte-unstuffing
2018-01-09 10:53:54 +01:00
Martine Lenders
c61a343193
slipdev: simplify and solidify byte-unstuffing
...
This simplifies and solidifies the reversal of SLIP's byte-stuffing
(aka byte-unstuffing ;-)) by
1. Using `tsrb` instead of `ringbuffer`: there are two actors. The ISR
and the device's event handler.
2. Moving the byte-unstuffing from the UART RX-handler (i.e. the ISR)
to the device's receive function (potentially not the ISR)
3. Removing the `pktfifo` member. The current number of bytes in the
ringbuffer is returned for `recv(data = NULL, len = 0)`. If that is
more than the packet contains (due to the byte stuffing it most
likely will be) the packet is reallocated in GNRC anyway.
2018-01-08 11:51:24 +01:00
PeterKietzmann
73a2810330
drivers/kw2xrf: finish ongoing transmission before sending next frame
2017-12-20 14:26:26 +01:00
Sebastian Meiling
0417a05ae9
Merge pull request #7949 from aabadie/pr/lis3dml_update
...
drivers/lis3mdl: adopt new parameters scheme and provide SAUL adaption
2017-12-15 09:27:04 +01:00
b543d0b5da
drivers/sx127x: add functions required for loramac
2017-12-14 22:13:41 +01:00
b39a3d79ef
drivers/lis3mdl: update to new parameters scheme
2017-12-14 18:18:20 +01:00
32b1ee3baf
drivers/sx127x: cleanup RX/TX timers
2017-12-09 16:51:09 +01:00
43e972fc61
Merge pull request #7970 from kYc0o/add_flashpage_write_raw
...
periph/flashpage: add flashpage_write_raw interface
2017-12-04 13:13:52 +01:00
kYc0o
6dffb71b09
drivers/include/periph/flashpage.h: add flashpage_write_raw
2017-11-30 17:25:35 +01:00
Hauke Petersen
5f5cdd148d
Merge pull request #7822 from Hyungsin/hamilton-hdc1000
...
drivers/hdc1000: add caching capability
2017-11-30 10:49:11 +01:00
Hyungsin
fd3f33880b
drivers/hdc1000: add caching capability for hdc1000 driver
2017-11-29 11:30:39 -08:00
smlng
b283b7784c
make: fix various compile errors with Wextra
...
pkg, nordic_softdevice_ble: disable CFLAGS to omit compiler error
sys, pm_layered: fix casting nonscalar to the same type
cpu, stm32_common: fix type-limits, remove always true assert
cpu, stm32f4: fix pointer arithmetic in periph/i2c
drivers, at86rf2xx: fix type-limits where condition always true
saul, gpio: fix if no gpio configured for saul
cpu, saml21: add frequency check to periph/timer
driver, cc110x: fix unused param and type-limts errors
boards, wsn430-common: fix old-style-declaration
make: fix old style definition
drivers, sdcard_spi: fix old style typedef
driver, at30tse: remove unnecessary check
driver, nrf24: fix type-limit
driver, pn532: change buffer from char to uint8_t
tests/driver_sdcard: fix type limits
boards, feather-m0: add missing field inits
driver, tcs37727: fix type limits
pkg, emb6: disable some compiler warnings
tests/emb6: disable some compiler warings
pkg, openthread: fix sign compare and unused params
tests/trickle: fix struct init
tests/pthread_cooperation: fix type limits
board, mips-malta: remove feature periph_uart
shell: fix var size for netif command
gnrc, netif: fix sign-compare
gnrc, nib: fix sign-compare
shell: fix output in netif command
posix: fix type-limits in pthread_cond
2017-11-28 18:31:43 +01:00
Sebastian Meiling
4a828c63aa
Merge pull request #7955 from aabadie/pr/mpu9150_update
...
drivers/mpu9150: adapt to new parameters initialization scheme + provide saul adaption
2017-11-28 11:41:54 +01:00
Martine Lenders
a63bb6d47b
Merge pull request #6895 from bergzand/drivers/radio-rssi-conv
...
drivers/radios Apply register to rssi dBm conversion to all radios
2017-11-27 23:52:15 +01:00
047b8172ae
cc2420: Add RSSI dBm conversion
2017-11-27 21:49:15 +01:00
4bd5fd611c
mrf24j40: Add RSSI dBm conversion
2017-11-27 21:49:15 +01:00
fa64e93313
netdev: Represent RSSI as int16_t
2017-11-27 21:49:15 +01:00
562474f975
Merge pull request #7280 from smlng/driver/hts221
...
drivers: hts221 humidity and temperature sensor
2017-11-22 13:19:46 +01:00
Peter Kietzmann
2c46e0928e
Merge pull request #7938 from bergzand/mrf24j40-bcast2
...
drivers/mrf24j40: fix radio ack request enabling
2017-11-22 08:15:27 +01:00
smlng
55cda8d8ab
drivers: add hts221 temperature and humidity sensor
2017-11-21 09:42:07 +01:00
1387945461
drivers/sx127x: expose iq_invert via netdev, add tx power getter
2017-11-20 11:04:41 +01:00
Martine Lenders
32318363a9
Merge pull request #7697 from aabadie/pr/lora_definitions
...
sys/net: add common lora phy definitions
2017-11-15 21:01:46 +01:00
marble
fbba6c3851
driver/soft_spi: initial implementation
2017-11-13 10:11:06 +01:00
Cenk Gündoğan
0ae6ec0d9b
Merge pull request #7956 from PeterKietzmann/pr_srf08_gain
...
drivers/srf08: correct value for max gain
2017-11-10 14:20:40 +01:00
Peter Kietzmann
87b0477b70
Merge pull request #7855 from kYc0o/fix_nrf24l01p_var_sizes
...
drivers/nrf24l01p: misc fixed
2017-11-09 08:06:28 +01:00
kYc0o
1927104298
drivers/nrf24l01p: fix vars lengths
2017-11-08 20:10:16 +01:00
819263ba1f
drivers/mpu9150: update to new parameters scheme
2017-11-08 09:02:57 +01:00
PeterKietzmann
1f332cfb7b
drivers/srf08: correct value for max gain
2017-11-07 23:31:40 +01:00
Martine Lenders
f6c9eb03c5
Merge pull request #7824 from Hyungsin/hamilton-tmp006
...
tmp006: optional raw values, low power mode, SAUL type
2017-11-07 22:51:56 +01:00
smlng
13639c1bb3
drivers, at86rf2xx: cleanup
...
- update documentation
- adapt constness
- fix code alignment and stlye
2017-11-07 21:37:41 +01:00
Hyungsin
3dbe604d96
tmp006: optional raw values, low power mode, SAUL type
2017-11-06 00:04:50 -08:00
6f43e98b95
drivers/si70xx: cleanup and use pseudomodules
2017-11-05 18:13:19 +01:00
b7c4a81702
drivers/mrf24j40: fix radio ack request enabling
2017-11-05 15:05:31 +01:00
Bas Stottelaar
31c7e9e4c2
periph: i2c: include note on address alignment.
2017-10-31 20:50:42 +01:00
91bed82a51
drivers/sx127x: use common LoRa definitions
2017-10-26 15:41:41 +02:00
kYc0o
a46907feda
drivers/include/sx127x.h: fix power var len
2017-10-26 01:45:29 +02:00
Hauke Petersen
5920d99752
pm: fix weak-based default implementations
...
Instead of using `weak` function definitions, this PR handles
default implementations using `PROVIDES_x` defines, allowing
for cpus/pm realted modules to use their own implementations.
2017-10-16 14:27:35 +02:00
Martine Lenders
b74ee8869b
slip: port to be used with netdev
2017-10-10 23:14:12 +02:00
Martine Lenders
72edaa3e47
Merge pull request #7586 from cladmi/pr/saul/gpio
...
saul/gpio: Low footprint handling of active-low signals + state initialization
2017-10-10 18:49:02 +02:00
c627935aec
drivers/sx127x: move netdev related callback to the right file
2017-10-10 18:23:18 +02:00
Gaëtan Harter
c39f4d8317
saul/gpio: add support to initialized state
2017-10-05 17:21:08 +02:00
Gaëtan Harter
c75470e602
saul/gpio: add support for inverted mode gpios
2017-10-05 17:19:54 +02:00
15c22e9ab7
at86rf2xx: add NETOPT_TX_RETRIES_NEEDED support
2017-10-04 12:20:15 +02:00
a2d790c924
mrf24j40: Add tx_retries_needed netopt
2017-09-26 11:16:12 +02:00
Joakim Nohlgård
297bc2b5e6
at86rf2xx: Add get NETOPT_LAST_ED_LEVEL
2017-09-06 21:17:14 +02:00
Joakim Nohlgård
988759d4da
at86rf2xx: Add manual CCA
2017-09-05 16:48:55 +02:00
Martine Lenders
83a94db151
Merge pull request #7532 from aabadie/drivers_doxygen_cleanup
...
drivers: doxygen cleanup
2017-09-04 14:16:52 +02:00
Hauke Petersen
a8678aeaaf
Merge pull request #6753 from haukepetersen/add_apa102
...
drivers: add driver for apa102 RGB LEDs
2017-09-04 11:22:15 +02:00
94c753c07a
drivers: doxygen cleanup
2017-09-01 15:12:20 +02:00
Hauke Petersen
9bde34df33
drivers: add driver for apa102 RGB LEDs
2017-09-01 09:37:31 +02:00
4b7e682048
drivers/dht: remove useless auto_init declaration
2017-08-31 22:05:33 +02:00
Peter Kietzmann
c177a1a75d
Merge pull request #6942 from smlng/driver/my9221
...
Add driver for MY9221 LED controller and (based on that) the Seeed Studio Grove LED bar
2017-08-30 09:21:33 +02:00
smlng
e5e933e332
drivers: add grove ledbar driver
2017-08-30 09:07:35 +02:00
smlng
ecaca83b0b
drivers: add my9221 led controller
2017-08-30 09:06:03 +02:00
5dc834a72d
doxygen: fix typo on word 'successfully'
2017-08-29 15:12:44 +02:00
Joakim Nohlgård
065bc62e0a
netdev: Make set() value parameter const void *
2017-08-25 13:41:19 +02:00
Hauke Petersen
7204ec3166
periph/rtc: removed RTC_NUMOF guards from header
2017-08-23 15:39:16 +02:00
Sebastian Meiling
675f665dd0
Merge pull request #7464 from OTAkeys/pr/lsm6dsl
...
drivers/lsm6dsl: add power up/down functions
2017-08-21 09:41:02 +02:00
Thomas Eichinger
57ca0f96ec
Merge pull request #7309 from Hyungsin/forupstream_radio_state_change
...
at86rf2xx: reliable radio state change
2017-08-16 07:42:06 -07:00
5cb0be3672
Merge pull request #7312 from miri64/ds1307/feat/initial
...
ds1307: initial import of a driver for the DS1307 RTC
2017-08-16 09:25:59 +02:00
Thomas Eichinger
093eb7a985
drivers/at86rf2xx: remove at86rf2xx_reset_state_machine
...
This function was only used once in the initialization procedure.
Inlining the actual state change reduces overhead and lines to
maintain.
If ever needed, undo this commit.
2017-08-14 10:07:42 -07:00
MichelRottleuthner
e5baef3810
Merge pull request #7324 from MichelRottleuthner/sdcard_mtd
...
sdcard_spi: integrate to mtd interface
2017-08-09 11:30:41 +02:00
Vincent Dupont
e75868db32
drivers/lsm6dsl: add power up/down functions
2017-08-09 09:53:05 +02:00
Martine Lenders
d07bfb4c9f
ds1307: initial import of a driver for the DS1307 RTC
2017-07-31 14:39:09 +02:00
Sebastian Meiling
95b31660b6
Merge pull request #7173 from haukepetersen/opt_gpiodoc
...
drivers/gpio: improved doc for gpio_init()
2017-07-14 14:17:39 +02:00
Hyungsin
6889cd934a
drivers/at86rf2xx: reliable radio state change
2017-07-07 11:48:44 -07:00
268c6b647e
drivers/can: fix doxygen documentation + typo
2017-07-03 20:43:51 +02:00
smlng
2b9eddfbeb
drivers, lsm6dsl: cleanup
2017-07-03 16:00:31 +02:00
smlng
a7d9547d5e
driver, lsm6dsl: fix temperature reading
2017-07-03 16:00:25 +02:00
f9122018a2
drivers: doxygen documentation improvement
2017-07-02 23:21:36 +02:00
Martine Lenders
1b08b03bd5
Merge pull request #7291 from aabadie/sx127x_fix_doc
...
drivers/sx127x: fix typo in documentation, cleanup
2017-07-02 20:51:43 +02:00
Martine Lenders
87c9edbbae
Merge pull request #7292 from aabadie/fix_adcxx1x_doc
...
drivers/adcxx1c: small doxygen fixes
2017-07-02 20:51:28 +02:00
9632938f93
drivers/adcxx1c: small doxygen fixes
2017-07-02 20:29:54 +02:00
7742fb47e3
drivers/diskio: cleanup documentation
2017-07-02 18:36:48 +02:00
9f2252b6b5
drivers/sx127x: fix typo in documentation, cleanup
2017-07-02 18:19:53 +02:00
0ccc264538
drivers: initial implementation of sx127x radio (LoRa mode only)
2017-06-30 19:00:40 +02:00
49c1725d98
Merge pull request #7249 from haukepetersen/opt_dac_doc
...
drivers/dac: clarified doc and named return values
2017-06-29 12:29:05 +02:00
smlng
c7375529e3
drivers: rework mpl3115a2 pressure sensor
2017-06-29 09:57:15 +02:00
f1a93bf36e
drivers/dht: some cleanup
2017-06-28 16:57:29 +02:00
Hauke Petersen
a2bc258af0
drivers/dac: clarified doc and named return values
...
- added more comprehensive doc to dac_init and dac_set
- named return values for dac_init
- use named return values in existing implementations
2017-06-27 12:52:12 +02:00
smlng
946256d26f
saul: use const for device parameter
2017-06-26 20:25:37 +02:00
Thomas Eichinger
c76fdf567d
Merge pull request #7115 from DipSwitch/pr/fix/at86rf2xx_setstate
...
driver/at86rf2xx: Fix possible race condition in at86rf2xx_configure
2017-06-26 08:51:23 -07:00
smlng
5fa123c8a2
drivers, jc42: fix constness in jc42_init
2017-06-26 16:22:34 +02:00
e4cc780f71
Merge pull request #7243 from smlng/drivers/adxl345/fix_const
...
drivers, adxl345: fix constness in adxl345_init
2017-06-26 16:12:07 +02:00
smlng
8664ca3cba
drivers, adxl345: fix constness in adxl345_init
2017-06-26 16:03:47 +02:00
067231936f
Merge pull request #5793 from OTAkeys/pr/can_stack
...
can: add a CAN stack for RIOT
2017-06-26 16:02:35 +02:00
Hauke Petersen
3ec75635ba
drivers/gpio: improved doc for gpio_init()
2017-06-26 13:39:28 +02:00
Martine Lenders
9d3f9f2589
Merge pull request #6402 from OTAkeys/pr/adcxx1c
...
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 10:39:02 +02:00
smlng
f1f80c0098
drivers/adcxx1c: use pseudomodules for device variants
2017-06-26 09:46:09 +02:00
Vincent Dupont
35056fd647
drivers/adcxx1c: add ADC081C/ADC101C/ADC121C i2c adc support
2017-06-26 09:46:03 +02:00
DipSwitch
cbbc44efad
driver/at86rf2xx: fix possible race condition in state machine
2017-06-24 21:43:05 +02:00
317716419c
drivers: use const device descriptor
2017-06-21 17:05:45 +02:00
74d0c3b67a
Merge pull request #7166 from kaspar030/add_mma8x5x_int_support
...
drivers: mma8x5x: add motion detection support
2017-06-21 13:00:46 +02:00
Vincent Dupont
8905199135
can_trx: add CAN transceiver interface
2017-06-19 15:36:20 +02:00
Vincent Dupont
5469ba1d49
can: add CAN stack
...
The CAN stack support only raw CAN at this time.
It contains a device interface (drivers/include/can/candev.h) and the data link
layer, build around can/device.c can/pkt.c and can/router.c. can/dll.c contains
the upper level and lower level interface to send and receive CAN frames.
Upper layer interface is located in include/can/raw.h
2017-06-19 15:35:26 +02:00
