Hauke Petersen
84b44f03dd
Merge pull request #4740 from cgundogan/pr/saul/pull_modes
...
saul: make pull-up/pull-down mode configurable
2016-02-04 16:34:40 +01:00
Cenk Gündoğan
b860ad3715
saul: make pull-up/pull-down mode configurable
2016-02-04 14:57:00 +01:00
Hauke Petersen
0bde97f167
drivers/lsm303dlhc: normalized SAUL readings
2016-02-04 11:51:28 +01:00
Hauke Petersen
555c010623
drivers/gpio: added default ISR context struct
2016-01-27 17:00:23 +01:00
Marc Poulhiès
de5a7e00c6
drivers/nrf24l01p : dynamic ack and dynamic payload
...
Add method for enabling/disable dynamic ack and dynamic payloads on
nrf24l01+ devices.
Also add function for reseting one or more interrupts.
2016-01-26 09:59:53 +01:00
Joakim Nohlgård
9af084ec18
drivers/periph/uart: Add missing #include <stddef.h>
...
Required for size_t
2016-01-19 14:11:35 +01:00
Hauke Petersen
94c0cc86af
Merge pull request #4504 from PeterKietzmann/extend_gpio_api
...
periph/gpio: extend gpio API doc
2016-01-05 12:04:22 +01:00
PeterKietzmann
4c41f7a994
periph/uart: extend uart API doc
2015-12-22 16:11:21 +01:00
PeterKietzmann
d251b604ad
periph/gpio: extend gpio API doc
2015-12-22 16:10:37 +01:00
Hauke Petersen
22cc26e9d7
drivers: added driver for enc28j60 ethernet chip
2015-12-08 11:51:18 +01:00
Thomas Eichinger
10323329ce
Merge pull request #4412 from DipSwitch/pr/at86rf2xx-phy-mode
...
at86rf2xx: Add support for channel page
2015-12-08 11:40:47 +01:00
Oleg Hahm
426816b9ae
drivers: fix pedantic compiler warnings
2015-12-07 20:28:52 +01:00
fa711ceb8d
drivers: netdev2: add module for shared ethernet code
2015-12-07 11:40:39 +01:00
Joakim Nohlgård
e9f385ae1d
at86rf2xx: Add support for channel page
2015-12-05 10:37:04 +01:00
Thomas Eichinger
ef8dc7733a
Merge pull request #4391 from thomaseichinger/pr/rf2xx_include_fix
...
drivers/at86rf2xx: don't inlcude the header in itselfs
2015-12-03 12:12:43 +01:00
Thomas Eichinger
1f2460d662
drivers/at86rf2xx: don't inlcude the header in itselfs
2015-12-03 11:15:30 +01:00
Hauke Petersen
81ed820528
drivers/pcd8544: fixed include guard
2015-12-02 11:20:02 +01:00
e53dc6f5e2
Merge pull request #3538 from haukepetersen/add_sensif_actif
...
Introducing SAUL, the [S]ensor [A]ctuator [U]ber [L]ayer
2015-12-01 11:01:20 +01:00
Hauke Petersen
84a094d092
drivers/lsm303dlhc: added SAUL integration
2015-11-30 20:33:55 +01:00
Hauke Petersen
5274c4e851
drivers/lps331ap: added SAUL integration
2015-11-30 20:33:54 +01:00
Hauke Petersen
7a4d6227c4
drivers/l3g4200d: added SAUL integration
2015-11-30 20:33:54 +01:00
Hauke Petersen
18361631a0
drivers/isl29020: added SAUL integration
2015-11-30 20:33:54 +01:00
Hauke Petersen
0390561e06
drivers: added S(ensor) A(ctuator) U(ber) L(ayer)
2015-11-30 20:33:53 +01:00
Kévin Roussel
8bfd856abe
Implemented the NETOPT_CCA_THRESHOLD option for AT86RF231
2015-11-30 13:15:14 +01:00
Hauke Petersen
f0b0db8f06
drivers: various doxygen fixes
...
- fixed group naming scheme to 'drivers_xx'
- introduced a group for actuators (analog to the sensors)
- added missing doxygen to ltc4150 driver
2015-11-23 12:15:50 +01:00
Hauke Petersen
aee4e564c0
drivers/cc110x: moved includes
...
let the driver follow the same structure than other drivers
for now: keeping 'private' includes in a local include folder
2015-11-20 10:32:43 +01:00
Hauke Petersen
95086da431
doc/drivers/sys: fixed all refs to drivers_periph_xx
2015-11-19 16:09:25 +01:00
Hauke Petersen
77b790375f
drivers/periph: some doxygen fixes
...
- added todos to periph module description
- repaired group names (e.g. s/driver_xx/drivers_xx/)
2015-11-19 15:57:36 +01:00
Hauke Petersen
82afb07f16
drivers/xbee: adapted to UART interface changes
2015-10-27 14:59:39 +01:00
Hauke Petersen
634ae1541b
drivers/periph: remodeled UART driver interface
2015-10-27 14:59:37 +01:00
Hauke Petersen
06743ba29e
drivers/periph/gpio: fixed includes
2015-10-27 13:29:37 +01:00
Peter Kietzmann
e539db10ee
Merge pull request #4104 from gebart/pr/drop-timer-reset
...
periph/timer: Drop timer_reset
2015-10-26 08:36:01 +01:00
Peter Kietzmann
835c2db5a5
Merge pull request #3135 from jfischer-phytec-iot/pr@tcs37727
...
Driver for TCS3772 Color Light-to-Digital Converter
2015-10-23 10:05:31 +02:00
Johann F
c6cec830f9
drivers/tcs37727: initial commit for tcs37727 driver
...
The driver supports lux and ct calculation and autogain funktion.
2015-10-22 12:05:19 +02:00
Joakim Nohlgård
4c6e8769f6
periph/timer: Fix Doxygen module grouping
2015-10-21 16:53:55 +02:00
Hauke Petersen
9591d2049b
drivers/i2c: removed init_slave for now
2015-10-20 16:57:39 +02:00
Joakim Nohlgård
cbaeccdb90
periph/timer: Drop timer_reset
2015-10-17 20:11:03 +02:00
Hauke Petersen
0ce94291ac
drivers/gpio: renamed GPIO(x,y) macro to GPIO_PIN
2015-10-13 11:40:03 +02:00
daniel-k
396b76c039
drivers/at30tse75x: add device driver for AT30TSE75x temperature sensor
2015-10-02 13:34:21 +02:00
Peter Kietzmann
7770fab9e8
Merge pull request #3994 from daniel-k/pr/rtt_ticks_convert
...
periph/rtt: add macros for ticks to time conversion
2015-09-30 10:06:27 +02:00
Peter Kietzmann
d18063cbe1
Merge pull request #3929 from haukepetersen/opt_periph_i2c
...
drivers/i2c: optimized I2C periph driver interface
2015-09-30 08:58:29 +02:00
Oleg Hahm
4cfb8140e4
Merge pull request #3978 from LudwigOrtmann/pr/namechange
...
documentation: update my name (Ortmann -> Knüpfer)
2015-09-28 10:38:41 +02:00
Ludwig Knüpfer
eda6328e21
documentation: update my name (Ortmann -> Knüpfer)
2015-09-27 18:58:30 +02:00
Oleg Hahm
f035bced0c
doc: put network devices and sensors in subgroups
2015-09-27 18:25:43 +02:00
14d0ef6c4d
drivers: add cc110x driver
2015-09-23 18:55:11 +02:00
daniel-k
e433231941
periph/rtt: add macros for ticks to time conversion
2015-09-22 16:59:05 +02:00
Hauke Petersen
a4183454e8
drivers/i2c: optimized I2C periph driver interface
...
- added SPI_DEV and SPI_UNDEF macros
- made types and speed values overritable by CPU
- moved old device enum to dev_enums.h
- reformatted a little bit to comply to 80 char line length
2015-09-22 14:43:47 +02:00
Joakim Nohlgård
98c465008b
all: Update @gebart family name, email
2015-09-20 13:47:39 +02:00
4445d940ea
drivers: sht11: use xtimer
2015-09-16 10:58:52 +02:00
Hauke Petersen
d99aaff2fb
drivers/srf02: various optimizations
...
- switched to use xtimer
- simplified interface slightly
- optimized reading of results
- some style cleanups
- updated the documentation
2015-09-07 12:02:38 +02:00
bd698bf574
drivers: add encx24j600 ethernet driver
2015-09-04 18:49:08 +02:00
c84199ce10
sys: netdev2.h: add link up/down event types
2015-09-04 18:03:13 +02:00
daniel-k
6f705a5189
at86rf2xx: implement CSMA settings
2015-09-01 18:45:47 +02:00
38a3b2ea7b
sys: add improved network device API
2015-08-26 16:51:52 +02:00
Martine Lenders
58ff31bfe9
gnrc: make all gnrc modules sub-modules of gnrc
2015-08-18 23:00:07 +02:00
Martine Lenders
b969eeb217
gnrc: rename ng_netbase to gnrc
2015-08-18 16:11:55 +02:00
BytesGalore
394ddb6900
drivers: renamed further remaining *NG_* macros
2015-08-12 17:21:45 +02:00
Martine Lenders
8f9e1656e1
at86rf2xx: remove ng_ prefix
2015-08-10 00:08:21 +02:00
Martine Lenders
e8d5d5576a
gnrc: piggy-back some code style changes
2015-08-07 16:53:05 +02:00
Martine Lenders
9cf5e5fb6a
ieee802154: remove ng_ prefix
2015-08-07 14:36:04 +02:00
Hauke Petersen
97a19016cf
drivers: adapted to renamed NETOPT header
2015-08-06 15:36:56 +02:00
5d8349298f
remove bulk of legacy network stack and drivers
2015-08-06 12:12:47 +02:00
Martine Lenders
6d9b928818
Merge pull request #3536 from cgundogan/pr/doc/todo
...
Make use of doxygen todo
2015-08-05 15:59:01 +02:00
Martine Lenders
0aef65bd76
Merge pull request #3559 from OlegHahm/channel_26_as_default
...
ieee802.15.4: switch to 26 as default channel
2015-08-05 15:51:57 +02:00
Oleg Hahm
761183bfd7
ieee802.15.4: switch to 26 as default channel
...
In order to avoid collisions with IEEE 802.11b networks, channel 25 or
26 is the best choice.
See for instance https://www.cs.umd.edu/~ctas/bibs/2007/4.pdf
2015-08-04 18:02:27 +02:00
Joakim Gebart
abc0a3f97f
drivers/include/periph/timer.h: add dev_enums.h include until all platforms have been updated
2015-08-03 22:52:22 +02:00
Hauke Petersen
b21e21e6e1
drivers/periph: updated the timer interface a bit
...
- fixed some formatting to comments fit 80 char page width
- made tim_t overridable by the CPU
- defined TIMER_DEV() and TIMER_UNDEF macros
2015-08-03 13:56:16 +02:00
Cenk Gündoğan
4638a57e38
ng_at86rf2xx: use doxygen todo
2015-08-03 11:00:21 +02:00
Martine Lenders
93151bcf45
ng_at86rf2xx: don't ifdef type definitions
2015-07-31 00:08:03 +02:00
Hauke Petersen
360d90d0b1
driver/ng_at86rfxxx: fixed formatting in header
2015-07-30 15:02:03 +02:00
Oleg Hahm
03b7c7349a
Merge pull request #3457 from authmillenon/gnrc/api/rename-netconf
...
gnrc: rename ng_netconf to ng_netopt
2015-07-28 18:21:09 +02:00
Martine Lenders
6f56b983f0
gnrc: replace all instances of ng_netconf with ng_netopt
2015-07-28 13:33:12 +02:00
Thomas Eichinger
d10631adec
Merge pull request #3434 from gebart/pr/ng_at86rf2xx-fixes-1
...
ng_at86rf2xx: Clean up state transitions and netdev implementation
2015-07-22 17:55:58 +02:00
Joakim Gebart
0e1f8f1efe
drivers/ng_at86rf2xx: Clean up state transition code.
...
- Force TRX_OFF before SLEEP
- Add function to reset the state machine
- Reset state machine after hardware reset during initialization
- Get rid of redundant at86rf2xx_get_state
2015-07-20 19:01:53 +02:00
Joakim Gebart
9781ea99cc
drivers/hih6310: Initial commit of HIH6310 driver
...
Honeywell HumidIcon Digital Humidity/Temperature Sensors: HIH-6130/6131 Series
Only basic humidity and temperature measurement support is implemented.
Missing:
- Alarm interrupts
- Command mode (reconfigure i2c address, alarm levels, alarm polarity, custom ID)
2015-07-20 18:41:14 +02:00
Thomas Eichinger
c72f37a30b
Merge pull request #3174 from daniel-k/periph_rtt_conv
...
periph/rtt: add macros for time to tick conversion
2015-07-18 17:55:07 +02:00
Joakim Gebart
9292373720
at86rf231: Set AT86RF231_MIN_CHANNEL to 0 to support AT86RF212B
2015-07-14 20:23:14 +02:00
Joakim Gebart
b10e33dfc0
drivers/adt7310: Add ADT7310 temperature sensor driver
...
This is a driver for Analog Devices ADT7310 +/-0.5°C Accurate, 16-Bit
Digital SPI Temperature Sensor.
Only basic reading is supported. Interrupt and compare are not
implemented yet.
See: http://www.analog.com/en/products/analog-to-digital-converters/integrated-special-purpose-converters/integrated-temperature-sensors/adt7310.html
2015-07-09 23:39:32 +02:00
Joakim Gebart
c9bdbd1a74
lis3dh: Refactor, add INT1 handling, improve FIFO mode
2015-07-07 12:03:28 +02:00
Hauke Petersen
55e0362814
drivers/xbee: use GPIO_UNDEF instead of GPIO_NUMOF
2015-06-14 16:12:47 +02:00
Hauke Petersen
4a4ee44abc
drivers/gpio: added GPIO_UNDEF define
2015-06-14 16:12:20 +02:00
Hauke Petersen
2cc2d9f740
drivers: adjusted drivers to changed GPIO interface
2015-06-12 19:10:29 +02:00
Hauke Petersen
b49f11bed7
drivers/gpio: overhaul of the periph GPIO driver
...
- merged init_in and init_out
- renamed init_int to init_exti
- made datatypes overwritable
2015-06-12 19:09:32 +02:00
Hauke Petersen
6f2f716363
Merge pull request #3158 from authmillenon/xbee/enh/addr-len
...
xbee: make address length configurable
2015-06-12 14:34:21 +02:00
Martine Lenders
f4392f7661
xbee: make address length configurable
...
6LoWPAN-ND states [1] that the IPv6 address should be generated from the
EUI-64 of the interface, since it can be assumed as globally unique and
would not require duplicate address detection. Currently the xbee module is
not able to use any other address for short address with IPv6 since
NETCONF_OPT_SRC_LEN always returns 2. This patch fixes that.
[1] https://tools.ietf.org/html/rfc6775#section-5.2
2015-06-11 19:51:35 +02:00
daniel-k
80c13d109b
periph/rtt: add macros for time to tick conversion
2015-06-08 17:19:20 +02:00
Ludwig Ortmann
af5af90cba
drivers/dht: add support for DHT21
2015-06-06 17:08:47 +02:00
Joakim Gebart
3ede02683c
drivers/servo: Handle inexact frequencies from periph_pwm
2015-05-30 12:41:07 +02:00
Peter Kietzmann
c839e65479
Merge pull request #3025 from OlegHahm/netconf_retransmit
...
netconf: at86rf231: configure maximum retransmits
2015-05-29 10:10:56 +02:00
Ludwig Ortmann
4a05f47bcf
drivers/dht: initial import
...
Unified driver for DHT11 and DHT22.
2015-05-29 06:24:18 +02:00
Hauke Petersen
9943f51080
global: renamed cpu-conf.h into cpu_conf.h
2015-05-28 15:45:05 +02:00
Oleg Hahm
76e4c820e5
ng_netconf: ng_at86rf2xx: set retransmissions
...
Introduces a netconf option to configure the maximum amount of
retransmissions and implements this for the at86rf2xx radios.
2015-05-28 13:35:36 +02:00
Joakim Gebart
13832d8e62
everything: Remove filename from @file Doxygen command
2015-05-22 07:34:41 +02:00
Johann Fischer
b0e73b9a8c
Merge pull request #2983 from jfischer-phytec-iot/pr@kw2x-rf-autoinit
...
boards/pba-d-01-kw2x: add network interface auto init
2015-05-20 10:00:23 +02:00
Hauke Petersen
354e5db5a8
Merge pull request #2963 from OlegHahm/fix_2962
...
at86rf2xx: fix EUI64 computation
2015-05-19 10:59:34 +02:00
Oleg Hahm
6e6f1792af
Merge pull request #2586 from OlegHahm/remove_obsolete_cc110x_rpl_warning
...
cc110x: remove warning about the transceiver mode
2015-05-19 01:34:54 +02:00
Jonas
9b66477180
adapted new auto-init process to kw2xrf driver
...
added kw2xrf to auto-init
2015-05-18 17:12:44 +02:00
Peter Kietzmann
b3e78ddc33
Merge pull request #3016 from gebart/pr/tab-indentation
...
Inconsistent indentation in some files
2015-05-18 15:45:15 +02:00
Oleg Hahm
92f4dec8da
xbee: use last 2 octets of EUI64 for short address
...
Dependency two CPUID and hard coded default short address are
superfluous now.
2015-05-18 15:30:25 +02:00
Oleg Hahm
5a5f9df898
cc110x: remove warning about the transceiver mode
...
* RPL is currently working with both transceiver modes (wake on radio
_and_ constant RX)
2015-05-18 11:41:27 +02:00
Joakim Gebart
83065236ec
drivers/mag3110: Replace tabs by spaces
2015-05-18 07:10:52 +02:00
Joakim Gebart
9597cfd946
drivers/cc110x: Replace tabs by spaces
2015-05-18 07:10:52 +02:00
a89b382297
drivers: xbee: adapt to new auto_init_ng_netif scheme
2015-05-17 21:02:00 +02:00
3c00ff0c9b
drivers: adapt ng_at86rf2xx to new auto_init_ng_netif scheme
2015-05-17 21:02:00 +02:00
Oleg Hahm
287aa4cdbf
Merge pull request #2992 from gebart/pr/pwm-return-value
...
periph_pwm: Return actual frequency (like the docs say)
2015-05-17 13:06:08 +02:00
Ludwig Ortmann
fe4391b179
drivers/isl29125: fix group description
2015-05-16 13:56:16 +02:00
Joakim Gebart
92a743560d
drivers/periph/pwm: Update return value doxygen to match long description
2015-05-16 10:00:03 +02:00
Oleg Hahm
4d64b98f2c
Merge pull request #2756 from jremmert-phytec-iot/pr@ng_kw2xrf
...
driver/kw2xrf: added ng_netdev implementation for the Freescale kw2x radio
2015-05-14 12:51:00 +02:00
Jonas
3287e71d45
Initial import of tests for kw2x radio
...
squash: driver: fixed typo to pass doccheck
squash: driver: bug fixes after test
squash: adapted Makefiles for correct build behaviour
restructured, no spi interaction in isr anymore
major bugfixes and restructurization
comments addressed
introduce new netconf option, ..AUTOCCA
squash: minor bugfix and add auto-init mechanism
squash: minor fixes to make travis happy
2015-05-13 13:06:59 +02:00
Jonas
49f09477af
Initial commit of ng_kw2xrf radio driver
...
squash: removed tab indent
2015-05-13 11:21:14 +02:00
Ludwig Ortmann
be8d62a967
drivers/isl29125: beautify indentation
2015-05-12 07:25:54 +02:00
Ludwig Ortmann
0db92da19d
drivers/isl29125: initial import
2015-05-12 07:23:41 +02:00
Joakim Gebart
b64ca89dc4
netdev: doxygen: documentation fix for NETDEV_DEFAULT
2015-05-10 09:56:19 +02:00
Joakim Gebart
dba0c94cc2
netdev: Doxygen add missing @defgroup netdev_802154
2015-05-10 09:42:08 +02:00
Oleg Hahm
e9145fb911
Merge pull request #2939 from gebart/pr/whitespace-fixes1
...
Whitespace fixes
2015-05-09 23:46:31 +02:00
bapclenet
3bce17b3e4
at86rf2xx/tx_pwr for 212B and 233
2015-05-09 13:30:52 +02:00
Joakim Gebart
453efc8ea1
drivers/include/hdc1000.h: Unix line endings
2015-05-09 09:02:57 +02:00
bapclenet
e33437958b
at86rf2xx/212b_frequency - adapt 868MHz and 915MHz frequency
2015-05-08 12:46:56 +02:00
Joakim Gebart
db9d3ddf48
nvram: Add generic SPI connected NVRAM interface.
2015-05-04 10:39:42 +02:00
Joakim Gebart
a982af330c
drivers: Add API for NVRAM devices with byte level erase.
2015-05-04 10:39:32 +02:00
Ludwig Ortmann
8ba166df6d
drivers/isl29020: fix some spelling errors
2015-05-02 08:33:15 +02:00
Hauke Petersen
3778fb3dde
drivers: added driver for PCD8544 LCD display
2015-04-30 13:46:03 +02:00
Hauke Petersen
fefac35c1c
drivers: new driver for at86rf2xx family radios
2015-04-27 18:56:59 +02:00
Hauke Petersen
ab7f1dc2cd
drivers/xbee: changed default for channel & panID
2015-04-20 18:12:40 +02:00
Hauke Petersen
bf4733fd88
drivers/periph/spi: added missing stdint.h include
2015-04-16 18:09:32 +02:00
PeterKietzmann
9e17d1b9fd
doc/drivers/srf: edit author and copyright
2015-04-13 13:07:56 +02:00
altairpearl
b47cc8d93d
drivers : Update include guards to remove leading underscores
2015-03-30 20:00:28 +05:30
Hauke Petersen
8a20f2f401
drivers: added support for Xbee modules
2015-03-24 23:19:29 +01:00
Oleg Hahm
985a6525cc
Merge pull request #2690 from Darredevil/patch-13
...
Repair header file include guards for /drivers
2015-03-24 11:04:18 -05:00
Alexandru Caciulescu
57dd7d35a1
drivers/include/servo: Repair header file include guards
2015-03-24 17:55:43 +02:00
Alexandru Caciulescu
d31f9cbb1b
drivers/include/rgbled: Repair header file include guards
2015-03-24 17:55:42 +02:00
Alexandru Caciulescu
2c5164004c
drivers/include/pir: Repair header file include guards
2015-03-24 17:55:42 +02:00
Alexandru Caciulescu
451bf78549
drivers/include/periph: Repair header file include guards
2015-03-24 17:55:42 +02:00
Alexandru Caciulescu
2b88c861c9
drivers/include/nrf24l01: Repair header file include guards
2015-03-24 17:55:41 +02:00
Alexandru Caciulescu
78618961f0
drivers/include/mq3: Repair header file include guards
2015-03-24 17:55:41 +02:00
Alexandru Caciulescu
ebaf61cc94
drivers/include/ltc4150: Repair header file include guards
2015-03-24 17:55:41 +02:00
Alexandru Caciulescu
7d68efcc38
drivers/include/lsm303dlhc: Repair header file include guards
2015-03-24 17:55:40 +02:00
Alexandru Caciulescu
81787154d0
drivers/include/lps331ap: Repair header file include guards
2015-03-24 17:55:40 +02:00
Alexandru Caciulescu
3d39c855c6
drivers/include/netdev: Repair header file include guards
2015-03-24 17:55:40 +02:00
Alexandru Caciulescu
a25a4d4fe5
drivers/include/cc110x_legacy: Repair header file include guards
2015-03-24 17:55:39 +02:00
Joakim Gebart
5ea9eaf386
drivers/ina220: Add driver for INA220 current and power sensor.
2015-03-19 17:22:22 +01:00
Ludwig Ortmann
cec87139a5
core, cpu, drivers, tests: remove trailing space
2015-02-18 13:52:48 +01:00
Fabian Nack
ae4616c5d8
drivers: Added MPU-9150 9-Axis motion sensor driver
2015-02-13 10:08:38 +01:00
Martine Lenders
0eb2d78dda
doc: use my real name
2015-02-08 18:52:16 +01:00
Johann Fischer
b540def4b1
drivers/hdc1000: Acquire exclusive access to I2C bus and minor bug fixes
...
fix doxygen warnings
change default address
2015-01-28 10:26:02 +01:00
Hauke Petersen
19738bc61d
Merge pull request #2338 from gebart/pr/spi-cpol-cpha-docs
...
periph/spi: Update clock polarity and phase documentation for clarity.
2015-01-22 14:17:48 +01:00
Joakim Gebart
cc7acaaef0
periph/spi: Update clock polarity and phase documentation for clarity.
...
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2015-01-22 09:03:44 +01:00
Ludwig Ortmann
42659dfa4f
Merge pull request #2335 from thomaseichinger/deprecate_radio_driver
...
drivers/radio_driver: mark as deprecated
2015-01-21 14:20:28 +01:00
Thomas Eichinger
3f3e70b7a0
drivers/radio_driver: mark as deprecated
2015-01-21 13:10:19 +01:00
Peter Kietzmann
647d0aef5f
Merge pull request #2330 from PeterKietzmann/fix_nrf24l01p_driver
...
drivers/nrf24l01p: fixes
2015-01-21 12:10:01 +01:00
