Leandro Lanzieri
f979ec5812
drivers/sx126x/Kconfig: rework model selection
2021-11-29 10:45:10 +01:00
Francisco Molina
e17e3254e1
drivers/sx126x: add tx_pa_mode
...
BOARDs with RF switch might only support one of the TX modes, and
on init the BOARD needs to be configured accordingly and the correct
mode selected on TX.
2021-11-08 18:42:05 +01:00
a120c2b296
drivers/sx126x: declare pseudomodules at driver level
2021-10-05 11:48:51 +02:00
Jose Alamos
b299299ad3
drivers/sx126x: fix NETOPT_RX_SYMBOL_TIMEOUT
2021-07-14 14:11:15 +02:00
José Alamos
934c875aba
Merge pull request #16579 from akshaim/pr/wl55jc_lorawan_final
...
drivers/sx126x: Add support for Nucleo -WL55JC
2021-07-09 14:48:11 +02:00
Akshai M
29c392d52d
drivers/sx126x : Uncrustify
2021-07-09 11:16:41 +02:00
Akshai M
17ad0fc5a7
driver/sx126x : Add set_rf_mode interface
2021-07-09 11:16:41 +02:00
Akshai M
8870a885cb
drivers/sx126x : Add stm32wl variant
2021-07-09 11:16:41 +02:00
Akshai M
896c12a009
drivers/sx126x: Enable SX126X_IRQ_SYNC_WORD_VALID irq
2021-07-09 10:47:42 +02:00
Akshai M
23c70e321d
drivers/sx126x.c : Add debug messages
2021-07-09 10:47:42 +02:00
Jose Alamos
c9ee5fb76a
sx126x: avoid explicit cast to netdev
2021-07-09 10:38:36 +02:00
Akshai M
4d890b1c45
drivers/sx126x : Configure Rx timeout timer
2021-07-08 12:19:36 +02:00
Akshai M
8d43dbf67f
drivers/sx126x : Update NETOPT_RX_xx
...
r/NETOPT_RX_TIMEOUT/NETOPT_RX_SYMBOL_TIMEOUT
Use sx126x_symbol_to_msec() to calculate the RX timeout in ms.
2021-07-08 12:19:36 +02:00
Francisco
ccfd3ee980
Merge pull request #16597 from jia200x/pr/sx126x_kconfig
...
sx126x: add support for multiple simultaneous variants
2021-07-06 13:19:15 +02:00
Jose Alamos
2e5b7f9e31
sx126x: add support for multiple simultaneous variants
2021-07-05 16:02:15 +02:00
Jose Alamos
033c1d97f7
sx126x: move pa_cfg to ROM
2021-07-02 11:12:53 +02:00
Jose Alamos
951822c41b
drivers/sx126x: fix wrong return value in recv function
2021-06-22 16:14:21 +02:00
Jose Alamos
d4941604d9
drivers/sx126x: fix netdev send function
...
This commit fixes the send function of sx126x. The loop that reads the
iolist was not considering the offset. Therefore each iolist snippet was
being written into the first position.
The loop was also setting the payload length to the size of the iolist
snippet. Then the payload was also wrong.
With this commit an iolist is copied sequentially into the framebuffer
and the payload length is set to `iolist_size`
2021-06-18 12:19:16 +02:00
0b5b9bd80f
drivers: add implementation for sx126x lora radio
2021-03-30 16:12:39 +02:00
