19278: gnrc_dhcpv6_client_simple_pd: select upstream based on type/index r=benpicco a=benpicco
19290: sys/crypto: make AES_KEY struct private & rename it r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
19142: sock_dtls: move common code into sock_dtls_establish_session() r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
18472: drivers/mrf24j40: add support for IEEE 802.15.4 Radio HAL r=benpicco a=jia200x
19175: drivers/periph_common/flashpage: fix silent error r=benpicco a=Enoch247
### Contribution description
This patch removes a test that silently hides failed writes to NULL. Instead, assert is used to ensure that the address is not NULL.
### Testing procedure
I am not certain how to update the tests to catch asserts. If this is possible, I will add a test, if someone will point me to a good example to learn from.
### Issues/PRs references
- none
Co-authored-by: Jose Alamos <jose@alamos.cc>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
18477: gnrc_static: add static network configuration r=miri64 a=benpicco
19101: CI: update check-labels-action r=miri64 a=kaspar030
19155: Revert "sys/pm_layered: pm_(un)block add attribute optimize(3)" r=maribu a=Teufelchen1
Revert "sys/pm_layered: pm_(un)block add attribute optimize(3) -shortens hotpath"
This reverts commit 5447203921.
### Contribution description
Compiling `examples/gnrc_networking_mac` using `TOOLCHAIN=llvm` yields the following error:
```
RIOT/sys/pm_layered/pm.c:77:16: error: unknown attribute 'optimize' ignored [-Werror,-Wunknown-attributes]
__attribute__((optimize(3)))
```
As indicated, this is because the attribute `optimize` is GCC only and not present in LLVM.
Compare the manpages of [GCC](https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html) and [LLVM](https://clang.llvm.org/docs/AttributeReference.html).
### Testing procedure
Since this should only affect performance and not behavior, no special testing is needed. I am not aware of any tests in RIOT which could verify that assumption.
### Issues/PRs references
Introduced in #18846
There is another instance of this attribute being used in[ shell_lock.c](6fb340d654/sys/shell_lock/shell_lock.c (L80)). Since the usage is security related, I omit it from this PR.
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
18752: nanocoap_sock: deprecate nanocoap_get() r=benpicco a=benpicco
19100: cpu/esp_common: allow configuration of UART0 r=benpicco a=gschorcht
### Contribution description
This PR
- fixes the issue for ESP32 SoCs that UART0 signals can't be routed to arbitrary GPIOs and
- allows the configuration of the UART device used by the bootloader.
The UART interface and its configuration used by the STDIO are defined in RIOT using the define `STDIO_UART_DEV` and the configuration of the corresponding UART device in `periph_conf.h`.
However, the bootloader compiled directly in ESP-IDF uses its own definitions `CONFIG_ESP_CONSOLE_UART_*` for the UART configuration. To be able to use a consistent UART configuration in RIOT and the bootloader, e.g. to see the output of the 2nd stage bootloader, these `CONFIG_ESP_CONSOLE_UART_*` can be defined via a set of KConfig variables in RIOT (not yet implemented in Kconfig):
- `CONSOLE_CONFIG_UART_NUM` defines the UART device to be used by the bootloader and by `STDIO_UART_DEV`
- `CONSOLE_CONFIG_UART_RX` and `CONSOLE_CONFIG_UART_TX` define the GPIOs to be used by the bootloader and should be the GPIOs as defined in `periph_conf.h` for the corresponding UART device.
### Testing procedure
Any ESP32 node should still work with `stdio_uart` and the default configuration. To test an alternative configuration, use
```
CFLAGS='-DUART1_TXD=5 -DUART1_RXD=4 -DCONFIG_CONSOLE_UART_NUM=1 -DCONFIG_CONSOLE_UART_TX=5 -DCONFIG_CONSOLE_UART_RX=4' USEMODULE=esp_log_startup BOARD=esp32-wroom-32 make -C tests/shell flash
```
The bootloader output and the STDIO should be routed to UART1 at GPIO4 and GPIO5.
### Issues/PRs references
Prerequisite for PR ##18863
19104: tests/periph_uart: only exclude STDIO_UART_DEV if stdio_uart is used r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
18773: nanocoap_sock: fix handling empty ACKs with separate response r=maribu a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
The previous implementation used creative construct for impedance
mismatching between the core list API (which returns a ptr to the
removed element if found) and the GNRC pkt list API (which returns a
ptr to the new list head) that creates a temporary list head on the
stack.
I'm not entirely sure if the previous implementation is containing
undefined behavior that is used against us with GCC >= 12.x, or if this
is a compiler bug. In either case, not reusing the core list API here
and just having a textbook linked list delete function here is not much
less readable and fixes the issue for our users.