Michel Rottleuthner
41d103ad10
drivers/pn532: fix wrong buffer type
2018-06-29 16:48:59 +02:00
Joakim Nohlgård
904c583038
Merge pull request #8697 from aabadie/pr/drivers/params/lis3dh
...
drivers/lis3dh: apply unified driver params scheme + cleanup
2018-06-28 10:52:48 +02:00
6e6716a1a6
Merge pull request #9317 from maribu/sht1x
...
drivers/sht11: Major refactoring
2018-06-27 10:10:39 +02:00
Marian Buschsieweke
b91359b05b
drivers/sht1x: Added SAUL integration
2018-06-27 08:58:05 +02:00
Marian Buschsieweke
de9b67bdc2
drivers/sht1x: Major refactoring
...
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
2018-06-27 08:58:00 +02:00
Marian Buschsieweke
d208c224b0
drivers: Renamed module sht11 to sht1x
...
The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in
calibration, not as in resolution). Thus, the same driver can be used for all.
The new driver name better reflects this fact.
2018-06-27 08:57:58 +02:00
Hyungsin
0c5c3d9b77
driver/pir: add pir-based occupancy sensing
2018-06-26 13:46:37 -07:00
42c4460daf
Merge pull request #9325 from aabadie/pr/saul/tvoc_ppb
...
drivers/saul :sys/phydat: add definitions for TVOC sensor type and PPB unit
2018-06-25 12:20:11 +02:00
Hyungsin
1b7345535c
drivers/pulse_counter: make gpio_mode configurable
2018-06-19 14:50:37 -07:00
ceb9710b3e
drivers/at: make OK and ERROR replies configurable
2018-06-13 09:49:13 +02:00
a08e9919a9
drivers: fix doxygen grouping
2018-06-11 19:10:40 +02:00
698fbf98cc
drivers/saul: add definitions TVOC sensor type
2018-06-11 15:46:21 +02:00
Hauke Petersen
203a5ecfb4
drivers/Make.dep: add servo dependencies
2018-06-07 11:11:39 +02:00
ad31664f48
Merge pull request #9185 from OTAkeys/pr/add_at_parser_eol
...
driver/at: add option to keep EOL character in readline, and make EOL configurable
2018-05-29 19:57:12 +02:00
Vincent Dupont
3f620d582d
at: make receive EOL configurable
2018-05-29 17:30:55 +02:00
Vincent Dupont
3f94bd20f4
drivers/at: add option to keep CR char
2018-05-29 17:30:55 +02:00
Marian Buschsieweke
ee33bd167a
drivers/cc110x: Made address format in debug output consistent
2018-05-29 15:57:30 +02:00
Marian Buschsieweke
2f3d811e99
drivers: Improved debug output in cc110x
2018-05-28 20:27:15 +02:00
Marian Buschsieweke
30c79a66d0
drivers: Replaced magic numbers in cc110x
...
Replaced magic undocumented numbers in the code by human readable preprocessor
macros.
2018-05-24 19:28:46 +02:00
Marian Buschsieweke
cbff3e6d3a
drivers: Implemented missing function in cc110x
...
Function cc110x_state_to_text is defined and (with ENABLE_DEBUG) referenced,
but implemented. This commit adds the missing implementation.
2018-05-24 19:17:59 +02:00
Marian Buschsieweke
b4f70be9ef
drivers: Fixed struct documentation for cc110x
2018-05-24 19:16:52 +02:00
9fa58af73b
drivers/periph: add API for internal MCU EEPROM
2018-05-24 14:07:55 +02:00
d6eddde5e1
drivers/periph: fix doxygen groups in implementation
2018-05-24 09:11:43 +02:00
Vincent Dupont
84874e61d3
Merge pull request #7084 from kaspar030/add_at_parser
...
drivers: initial commit of generic AT parser module
2018-05-23 17:33:05 +02:00
0199f36bb3
drivers: at: many improvements
2018-05-23 16:08:28 +02:00
Vincent Dupont
7340e77328
drivers/at: add at_send_cmd_wait_prompt and at_send_bytes
2018-05-23 16:08:28 +02:00
Vincent Dupont
ee29b76c89
drivers/at: make EOL char configurable
2018-05-23 16:08:28 +02:00
9c9fad6da5
drivers: initial commit of generic AT parser module
2018-05-23 16:08:28 +02:00
de783eed78
boards/nucleo-f411re: rename to marketing name
2018-05-22 21:52:41 +02:00
Marian Buschsieweke
a6f9a86597
drivers/cc110x: Moved cc110x_params.h from boards to driver
...
- Replaced magic numbers in the CC110X configuration of the MSBA2
with SPI_DEV(x) and GPIO_PIN(x, y) macros
- Adjusted implementation of `cc110x_params.h` to match the code of `at86rf2xx`
- Made MSBA2's CC110X parameters the default configuration
2018-05-21 22:59:46 +02:00
1f436e2486
Merge pull request #8965 from aabadie/pr/drivers/io1_xplained_enh_sd
...
drivers/io1_xplained: improve driver and add support for the sdcard and light sensor
2018-05-14 09:00:47 +02:00
372aadd626
Merge pull request #8978 from Hyungsin/forupstream_fxos8700
...
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-14 08:45:58 +02:00
Hyungsin
beaf08bcb2
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-12 17:51:58 -07:00
Gunar Schorcht
af226d4fec
enc28j60: fix compilation with l2 stats enabled
2018-05-07 13:42:03 +02:00
f9c75d0df7
Merge pull request #8915 from ZetaR60/RIOT_ads101x
...
drivers/ads101x: support for ADCs
2018-05-03 08:31:03 +02:00
Joakim Nohlgård
fef0be8c4c
pulse_counter: Editorial changes to docs
2018-04-28 15:37:41 +02:00
734256aab6
drivers/io1_xplained: add support for light sensor
2018-04-17 11:06:01 +02:00
438aa09148
drivers/io1_xplained: add support for sdcard
2018-04-17 10:49:45 +02:00
4ceb309927
drivers/io1_xplained: refactor implementation
...
- directly use underlying drivers api (gpio, at30tse75x)
- use debug instead of log + rework messages
2018-04-17 10:48:48 +02:00
Dylan Laduranty
ff5817c569
Merge pull request #8926 from aabadie/pr/drivers/sx127x_fixes
...
drivers/sx127x: various improvements
2018-04-16 16:10:27 +02:00
0815ef185c
drivers/io1_xplained: fix gpio params initializer
2018-04-16 15:57:36 +02:00
fbea4f9b40
Merge pull request #8026 from miri64/cc1100/fix/netopt-max-pkt-size-width
...
cc110x: fix netdev get/set according to `netopt_t` doc
2018-04-16 12:10:19 +02:00
Matthew Blue
96a7029f5f
drivers/ads101x: Makefile support
2018-04-13 11:38:49 -04:00
Matthew Blue
073d45aa4d
drivers/ads101x: initial support
2018-04-13 11:38:49 -04:00
1d8984dc13
drivers/my9221: make local functions "static"
2018-04-13 12:18:28 +02:00
Martine Lenders
247b1a0d8f
cc110x: fix netdev get/set according to netopt_t doc
2018-04-13 00:29:26 +02:00
1bee32c75f
drivers/sx127x: refactor error management
2018-04-12 10:00:24 +02:00
7365e41337
drivers/sx127x: fix device init sequence order
2018-04-11 17:52:57 +02:00
cc2bf0ba27
drivers/sx127x: improve debug messages
2018-04-11 17:52:03 +02:00
2f533a169d
drivers/sx127x: use rx chain calibration only with sx1276
2018-04-11 17:51:11 +02:00
