Marian Buschsieweke
112b88f7ee
tests/periph_timer: Set freq for Arudino Leonardo
...
The Arduino Leonardo requires - like the other ATmega based Arduinos - a
different frequency than the default 1000000, as this frequency cannot be
achieved on a 16MHz ATmega with any available prescaler.
2019-05-24 15:12:47 +02:00
Martine Lenders
10d0dfaf33
Merge pull request #11378 from kaspar030/tests/pthread_tls_allow_negative_key
...
tests/pthread_tls: allow negative key values
2019-05-23 16:14:58 +02:00
69a38f8b7b
tests/driver_ds75lx: add test application
2019-05-22 16:54:19 +02:00
07a7ae9c3a
test: not enough memory for i-nucleo-lrwan1
2019-05-21 09:57:33 +02:00
ea2988c057
tests: add lsn50 to insufficient memory boards
2019-05-17 22:43:04 +02:00
Hauke Petersen
e172c80bad
tests/nimble_l2cap: adapt to config var name change
2019-05-17 10:34:26 +02:00
Hauke Petersen
5bd53db88f
tests/l2cap: use newly introduced TX_UNSTALLED evt
2019-05-17 10:34:26 +02:00
Leandro Lanzieri
d57f8ff793
Merge pull request #11536 from ParksProjets/pr_ds18
...
drivers/ds18: fix `ds18_read` for negative temperatures
2019-05-17 10:27:51 +02:00
Guillaume Gonnet
c9fa1d7503
tests/drivers_ds18: display negative numbers
...
When `ds18_read` returns -2506, DS18 test print `Temperature [ºC]: -25.-6`
whereas it should print `Temperature [ºC]: -25.06. This commit fixes this
issue.
2019-05-16 20:22:02 +02:00
Hauke Petersen
8637d308bd
tests: add test for evens_wait_timeout()
2019-05-16 12:01:42 +02:00
Gaëtan Harter
dde4fe0dc1
Merge pull request #11493 from fjmolinas/pr_xtimer_usleep_negative
...
tests/xtimer_usleep: fail with negative offsets
2019-05-14 12:45:15 +02:00
francisco
a687a26f42
tests/xtimer_usleep: fail with negative offset
...
- xtimer_usleep(timeout) should sleep for at least timeout us.
Negative offset, i.e. sleeping less than the specified time
is incorrect.
2019-05-14 08:57:29 +02:00
Juan I Carrano
cbc08edcd1
Merge pull request #11358 from fjmolinas/riot-cortexm-address-check
...
cpu/cortexm_common: function to check address validity
2019-05-13 11:50:48 +02:00
Oleg Artamonov
a5ce6deb02
cpu/cortexm_common: function to check address validity
2019-05-13 09:35:34 +02:00
Martine Lenders
98f97afc97
Merge pull request #11467 from kaspar030/increase_posix_semaphore_timeout
...
tests/posix_semaphore: unify and increase allowed test4 margin
2019-05-06 15:47:45 +02:00
a9cd9433f0
tests/posix_semaphore: unify and increase allowed test4 margin
...
Previously, there was a very tight allowed margin (100us), then some
special cases for platforms for which the test would otherwise fail,
increasing the margin.
This turned out to be a maintanance burden, as each slightly special
board needed a PR adding the special case.
This commit sets a quite large margin (1000us, 0.1% of total delay),
which should be large enough to not trip over platform-induced timer
inaccuracies, but still verify that the module is using timers
correctly.
(This is not a timer accuracy test.)
2019-05-06 14:51:44 +02:00
Dylan Laduranty
c49e72ac66
Merge pull request #11307 from fedepell/rwwee_autotests
...
tests/periph_flashpage: add RWWEE automatic test if hw supports it
2019-05-04 23:46:17 +02:00
Gaëtan Harter
ad599f724d
tests/pkg_cc25519: increase timeout for arduino-mega2560
...
`arduino-mega2560` finishes the test in 170 seconds so set a bigger timeout.
2019-04-30 21:59:54 +02:00
Francisco
c073e56b25
Merge pull request #11448 from cladmi/pr/tests/periph_hwrng
...
tests/periph_hwrng: add automated python test
2019-04-30 08:43:00 -07:00
Gaëtan Harter
564402e88f
tests/periph_hwrng: enable test in murdock
2019-04-30 15:50:09 +02:00
Francisco
cd0ab4a193
Merge pull request #11469 from aabadie/tests/periph_timer_kw41z
...
tests/periph_timer: include kw41z boards in low-power timer boards
2019-04-30 06:23:29 -07:00
96fd49520b
tests/periph_timer: include kw41z boards in low-power timers
2019-04-30 14:58:40 +02:00
Frank Hessel
19275d5788
tests/driver_sdcard_spi: Use uint8_t for byte buffers
2019-04-29 19:25:39 +02:00
Gaëtan Harter
9a15b32c57
tests/periph_hwrng: add automated python test
...
Add the automated test for 'periph_hwrng'. It only checks that numbers
are returned, not their value.
2019-04-25 15:21:26 +02:00
Martine Lenders
1fdccd5a2e
Merge pull request #11429 from jia200x/pr/fix_at86rf2xx_test
...
drivers/at86rf2xx: enable NETOPT_RX_END_IRQ and fix RSSI values
2019-04-24 20:26:23 +02:00
Martine Lenders
c1be18a002
tests/gnrc_udp: include gnrc_pktbuf_cmd per default
...
`tests/gnrc_udp` was specifically introduced for testing the release
specs. All of them ask the tester to check the packet buffer after the
test. So it makes sense to include the module that allows for that per
default for this test so the tester does not forget to include it ;-).
2019-04-24 16:45:25 +02:00
Martine Lenders
cfde3f1596
Merge pull request #11387 from danpetry/tests/periph_rtt_testfix
...
tests/periph_rtt: Correct the test script syntax
2019-04-23 12:30:15 +02:00
Jose Alamos
576bbaa248
drivers/at86rf2xx: print signed RSSI instead of unsigned
2019-04-23 11:15:26 +02:00
Jose Alamos
53a54dcea1
tests/at86rf2xx: enable NETOPT_RX_END_IRQ
2019-04-23 11:14:05 +02:00
José Alamos
d16d911f42
Merge pull request #10120 from mtausig/ocb
...
Add OCB encryption mode
2019-04-23 11:08:30 +02:00
Mathias Tausig
dcab239b9b
crypto: Implement Unit Tests for OCB mode
2019-04-23 10:36:31 +02:00
c93bb62040
Merge pull request #11427 from aabadie/pr/pkg/c25519_make_cleanup
...
pkg/c25519: cleanup in Makefiles
2019-04-23 09:55:56 +02:00
ddc909f8d9
tests/pkg_semtech-loramac: fix build commands in README
2019-04-22 21:12:25 +02:00
33bc8b67cc
tests/pkg_c25519: remove useless test target
2019-04-22 21:08:47 +02:00
Juan I Carrano
7169695cb5
Merge pull request #11379 from kaspar030/tests/pthread_cooperation_disable_hifive1
...
tests/pthread_cooperation: add hifive1 to BLACKLIST
2019-04-15 13:52:42 +02:00
Gilles DOFFE
3a83648f2a
drivers: add licence to motor_driver source files
...
Related to PR #10290 , add missing licence to some source files.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-04-13 00:29:58 +02:00
danpetry
b3ed7ade10
tests/periph_rtt: Correct the test script syntax
...
Previously the test was failing due to apparently incorrect Python syntax in
the testrunner script. This fix corrects this and the test now passes.
2019-04-12 14:39:14 +02:00
afc983724b
tests/pthread_cooperation: add hifive1 to BLACKLIST
...
The hifive1 has only 16kB of memory. The tests tries to allocate 12
thread stacks with 1kB (default) stacksize each. The corresponding
malloc() fails for the last two threads, making the test fail silently.
2019-04-11 15:42:42 +02:00
33783d9fa2
tests/pthread_tls: allow negative key values
...
On Hifive1, the created keys have a negative value. This commit
adjusts the pexpect script to allow for that.
2019-04-11 15:34:00 +02:00
Martine Lenders
364499f212
Merge pull request #11356 from jcarrano/fix_udp_atoi-master
...
tests/gnrc_udp: Replace atoi() by strtol().
2019-04-11 12:48:21 +02:00
Juan Carrano
c0af4237d8
tests/gnrc_udp: fix printf format string (%d->%u).
...
This was causing the CI build to fail in the static-check stage
(cppcheck).
2019-04-11 11:26:02 +02:00
Martine Lenders
f11d462b82
Merge pull request #11371 from danpetry/tests/gnrc_sock_dns_timeout
...
tests/gnrc_sock_dns: Give time to allow node to set its ll address
2019-04-10 17:43:10 +02:00
Martine Lenders
e0de94cb5f
Merge pull request #11309 from miri64/tests/enh/lwip_sock-l2util
...
tests: remove NETOPT_IPV6_IID dependency from lwip_sock tests
2019-04-10 17:07:16 +02:00
danpetry
b320dd7909
Give time to allow node to set its ll address
...
Set a delay of three seconds at the beginning of the test. Otherwise,
the node will send a neighbour solicitation with a blank link local
address, it won't receive a reply, and the test will fail.
2019-04-10 16:43:27 +02:00
Juan Carrano
54cbdaaa53
tests/gnrc_udp: Replace atoi() by strtol().
...
This patch is a reduced version of an earlier one, with the bare minimum
required to be able to run the test and get the release going.
Original description:
atoi() cannot detect errors. Many implementation return zero on error
and that is what was being checked here, making the "udp send" command
unable to parse integer values of zero. On top of this, the behavior on
errors does not seem to be specified in the standard (so it is not even
correct to check for zero even when zero is not an accepted value, like
for a port number).
The result of all this is that sending UDP packets of zero length (as
required by the Release Specs) was not possible.
This patch replaces atoi by strlen, which allows for robust error detection.
Sending zero length packets is possible.
2019-04-10 15:33:46 +02:00
Juan I Carrano
9832299e62
Merge pull request #11319 from miri64/pkg/new/ubasic
...
pkg: Initial introduction of ubasic package
2019-04-08 17:38:03 +02:00
Martine Lenders
9f960fd61c
tests: provide tests for ubasic package
2019-04-08 17:09:28 +02:00
Sebastian Meiling
4dd09eaa06
Merge pull request #6178 from OTAkeys/pr/can_stm32
...
can stm32: add a driver for STM32 bxCAN peripheral
2019-04-08 08:50:08 +02:00
25b0d4d67b
tests/pkg_c25519: increase timeout on non-native
2019-04-05 16:33:53 +02:00
f6f988cfbf
Merge pull request #9389 from bergzand/pr/pkg/c25519/initial
...
c25519: Initial support for the c25519 package
2019-04-04 14:23:09 +02:00
