quangphhr
afa723b2f7
drivers/hsc: add driver for honeywell pressure and temperature sensor
2021-01-06 10:22:17 +01:00
Marian Buschsieweke
e5a0154255
Merge pull request #14660 from maribu/netdev_confirm_send
...
drivers/net: Add netdev_driver_t::confirm_send
2021-01-05 16:11:20 +01:00
Marian Buschsieweke
53fcb97b2f
drivers/net: Add netdev_driver_t::confirm_send
...
Changed the API of `netdev_driver_t`:
- The `send()` function should no longer return the number of bytes and should
not block
- The upper layer now must call the new `confirm_send()` function after
calling `send()`; either busy waiting until something different to `-EBUSY`
is returned, or after `NETDEV_EVENT_TX_COMPLETE` was signaled
During transition to the new API, the upper layer must remain backward
compatible and must assume the legacy API if `netdev_driver_t::confirm_send()`
is `NULL`.
2021-01-05 15:34:11 +01:00
Leandro Lanzieri
675ddb6ccc
drivers/pn532: use pseudomodules to select i2c or spi
2021-01-04 16:55:16 +01:00
Jens Wetterich
e36a0d883a
esp_common/esp_now: use netdev_register()
2020-12-23 19:44:57 +01:00
benpicco
770bda165a
Merge pull request #15571 from iosabi/drv_si1133
...
drivers/si1133: New SI1133 UV/IR/Ambient light driver
2020-12-14 08:41:00 +01:00
iosabi
ce76125a22
drivers/si1133: New SI1133 UV/IR/Ambient light driver
...
The SI1133 from Silicon Labs is a UV Index Sensor and Ambient Light
Sensor in a small 2x2 mm DFN package. The sensor can measure
independently ultra violet (UV) light, infra red (IR) light and
ambient light, however the ambient light is also influenced by the
IR light requiring compensation from the IR readings.
The SI1133 is quite different from other Silicon Labs chips in RIOT OS
and therefore needs its own driver. In particular, the SI1133 has 7
different photodiode configurations to read but only 6 channels to
read them in parallel so only some channels can be read each time.
This patch implements a new driver allowing to read the data directly
and a saul interface for the three kinds of light source. There are
many configuration options including interrupts and continous modes
that are left out of this initial driver.
2020-12-14 03:13:23 +00:00
dylad
7cbaa3f890
net/netdev: create SAM0 Ethernet entry in netdev_type_t
2020-12-13 21:41:20 +01:00
chrysn
272c8d29cc
Merge pull request #13908 from benpicco/periph/dac_play
...
drivers/periph_common: dac: add dac_play()
2020-12-11 07:31:44 +01:00
benpicco
1477a340fe
Merge pull request #15150 from fabian18/ieee802154_security
...
Initial implementation of IEEE 802.15.4 security
2020-12-09 14:14:27 +01:00
Akshai M
bfd3a903fb
drivers/rn2xx3 : r/LORAMAC_DEFAULT_AR/CONFIG_RN2XX3_DEFAULT_AR
...
Move 'LORAMAC_DEFAULT_AR' to drivers/rn2xx3 i.e
'RN2XX3_DEFAULT_AR'
Move 'RN2XX3_DEFAULT_AR' to 'CONFIG_' namespace
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-12-08 11:33:44 +01:00
Benjamin Valentin
ceb3f8443a
drivers/dac_dds: add module to play sample buffer over a DAC
...
This adds an API function to play a buffer of Audio samples using a DAC.
Double buffered operation is supported by specifying a callback that will
be called when the next buffer can be queued with dac_dds_play().
2020-12-04 23:12:32 +01:00
Fabian Hüßler
1b5bcec554
drivers/netdev: Add IEEE 802.15.4 security
2020-12-04 09:40:55 +01:00
Akshai M
d65a4b3f97
drivers/ili9341 : Update documentation
2020-12-03 14:20:34 +01:00
Akshai M
9f81956e41
drivers/ili9341 : Model 'CONFIG_ILI9341_LE_MODE' as BOOL
2020-12-03 14:20:34 +01:00
Akshai M
a322c6d4c0
drivers/ili9341 : Move 'ILI9341_VCOML' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
Akshai M
d6935cd7bb
drivers/ili9341 : Move 'ILI9341_VCOMH' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
Akshai M
7bb83f9e01
drivers/ili9341 : Move 'ILI9341_GVDD' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
benpicco
a80631a297
Merge pull request #15074 from maribu/ptp-clock
...
drivers/periph/ptp_clock
2020-12-03 09:59:07 +01:00
Marian Buschsieweke
7d1edd51f4
drivers/periph: Added PTP clock API
2020-12-02 17:53:00 +01:00
benpicco
665c07eb53
Merge pull request #15120 from benpicco/driver/at86rf215-trim
...
driver/at86rf215: add functions to configure trim & clock output at run-time
2020-12-02 16:53:02 +01:00
Benjamin Valentin
95d082a2be
driver/at86rf215: add functions to set trim & clock output at run-time
...
To calibrate the at86rf215 radio, trim value has to be set at run-time
during board production.
Add two helper functions to control the trim value and clock output register.
2020-12-02 14:59:17 +01:00
Fabian Hüßler
c526a34770
sx127x: make use of netdev_register()
...
Call netdev_register() in sx127x_setup()
and pass the index in auto_init_sx127x()
and semtech_loramac_init()
2020-12-01 16:34:11 +01:00
Fabian Hüßler
8ca2e09d95
drivers/include: add NETDEV_SX127X
2020-12-01 16:34:06 +01:00
Marian Buschsieweke
56cf30172f
Merge pull request #15532 from fabian18/cc110x_netdev_register
...
drivers/cc110x: use netdev_register
2020-12-01 16:17:37 +01:00
Fabian Hüßler
39adf908ce
cc110x: make use of netdev_register()
...
Call netdev_register() in cc110x_setup()
and pass the index in auto_init_cc110x()
2020-12-01 12:11:20 +01:00
Fabian Hüßler
320b1c4206
drivers/include: add NETDEV_CC110X
2020-12-01 12:06:12 +01:00
Benjamin Valentin
eb199d4c78
netdev: move definition of NETDEV_INDEX_ANY to netdev
2020-12-01 11:55:06 +01:00
benpicco
333fce44b4
Merge pull request #14973 from benpicco/driver/at86rf215-batmon
...
drivers/at86rf215: implement battery monitor, add power bus
2020-12-01 11:52:46 +01:00
Benjamin Valentin
a28a60f16c
cpu/stm32: periph_eth: register with netdev
2020-11-29 23:10:37 +01:00
Francisco
14877443f7
Merge pull request #15494 from gdiribarne/bugfix/sfr04-avr-overflow
...
drivers/srf04: fix overflow on AVR
2020-11-26 11:14:15 +01:00
1d5e2e9cd9
all: remove traces of kernel_types.h
...
Automatically removed using:
$ git grep -l kernel_types | xargs sed -i '/^#include .kernel_types/d'
2020-11-25 17:52:34 +01:00
0b801c4de0
all: adapt to moved sched defines
2020-11-23 16:56:34 +01:00
Gilles Diribarne
5a5c8507d4
drivers/sfr04: Use uncrustify
2020-11-22 23:12:40 +01:00
Gilles Diribarne
caa1ad822d
drivers/sfr04: Fixed int overflow for AVR (arduino board)
2020-11-22 23:03:21 +01:00
benpicco
6cf6b47c27
Merge pull request #15445 from btcven/2020_11_05-gp2y10xx
...
drivers: add gp2y10xx dust sensor
2020-11-18 09:56:03 +01:00
Jean Pierre Dudey
e920a2e645
drivers: add gp2y10xx dust sensor
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2020-11-18 09:13:56 +01:00
Hauke Petersen
c4a8c45a3e
periph/rtt: fix tick conversion macros
2020-11-16 10:00:24 +01:00
Benjamin Valentin
f9650bdbc3
drivers/at86rf215: implement Battery Monitor
2020-11-13 22:59:09 +01:00
benpicco
be9eb22bb8
Merge pull request #15106 from chrysn-pull-requests/saul-rgbleds
...
saul_pwm: auto-init'able RGB LEDs and dimmers
2020-11-13 18:22:30 +01:00
benpicco
d9598a0f54
Merge pull request #15412 from bergzand/pr/flashpage/merge_raw
...
periph_flashpage: Make pagewise API optional
2020-11-12 22:32:21 +01:00
41bbaa7442
flashpage: Make pagewise API optional
...
flashpage currently requires pagewise implementation with an optional
extension for per block writes (flashpage_raw). Most implementations
with flashpage_raw implement the pagewise access via the flashpage_raw
functions. This commit makes the flashpage raw the main access method
and adds an extension feature for the pagewise access.
The functions and defines are renamed to reflect this. The API is also
extended with a dedicated function for erasing a sector.
2020-11-11 22:26:33 +01:00
Hauke Petersen
8a31519558
drivers: add support for ds3231 RTC
2020-11-09 15:18:54 +01:00
Francisco
3e3da1217d
Merge pull request #15249 from aabadie/pr/tools/typo
...
tools/codespell: fix new typos and make it fail when typos are found
2020-11-03 15:01:20 +01:00
benpicco
9681c204d6
Merge pull request #14959 from benpicco/at86rf215-mr-fsk
...
drivers/at86rf215: implement MR-FSK
2020-11-03 11:26:24 +01:00
Benjamin Valentin
6f23263503
drivers/at86rf215: implement MR-FSK
2020-11-03 10:51:21 +01:00
Benjamin Valentin
53ca0dd1d0
drivers/mtd_spi_nor: define WP and HOLD pin
...
Hold and WP are not used by the driver, but if they are connected
to the flash they must be driven HIGH to enable writes and not stop
any flash operation.
2020-11-02 21:17:36 +01:00
benpicco
e77d12da26
Merge pull request #15188 from benpicco/drivers/kw41zrf-register
...
drivers/kw41zrf: register with netdev
2020-10-31 14:30:00 +01:00
Marian Buschsieweke
125c892c03
drivers/periph/timer: Use uint32_t for frequency
...
For all currently supported platforms `unsigned long` is 32 bit in width. But
better use `uint32_t` to be safe.
2020-10-30 22:02:12 +01:00
cd3ee9e825
drivers/mii: fix typo 'auto-negotation' => 'auto-negotiation'
2020-10-27 10:33:48 +01:00
Benjamin Valentin
fde3026312
drivers/mtd_spi_nor: prevent data corruption on 'sector erase'
...
There is no difference between 4k erase and sector erase.
But sector erase would previously do `.block_erase` which would not
erase a sector (4k) but a whole block (64k).
Fortunately all boards declare `SPI_NOR_F_SECT_4K` and all file systems
don't try to erase anything smaller, so this was never triggered.
Add an `assert(0)` to crash instead of corrupting data.
2020-10-26 13:48:26 +01:00
Benjamin Valentin
0425325260
drivers/mtd_spi_nor: use single transfer to read JEDEC ID
...
Just read the JEDEC ID with a single SPI transfer, there can only
be 10 banks.
This makes adaption to QSPI much simpler because now flash functions
don't call the SPI API directly anymore.
2020-10-26 13:02:09 +01:00
Bas Stottelaar
26835a949f
drivers/*: remove unused assert.h include
2020-10-22 11:29:27 +02:00
chrysn
d196c7c4a6
drivers/saul/auto_init: Add PWM for LEDs
...
In analogy to the existing GPIO mappings, this provides (write-only)
SAUL entries for PWM'd LEDs in a single-LED (as SAUL_ACT_DIMMER) and an
RGB (as SAUL_ACT_RGB_LED) mode.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
2020-10-17 11:20:17 +02:00
benpicco
4edf5c7cbd
Merge pull request #15208 from benpicco/ieee802154_submac-etx
...
netdev/ieee802154_submac: add retransmission reporting
2020-10-15 14:31:54 +02:00
Benjamin Valentin
37aad4ef38
netdev/ieee802154_submac: add retransmission reporting
...
If we do software retransmissions, we already keep a count.
Allow to query it with `NETOPT_TX_RETRIES_NEEDED`.
2020-10-15 13:26:42 +02:00
Nishchay-sopho
eb1064eef4
drivers/scd30: Add reset function to Sensirion scd30 sensor
2020-10-14 15:07:01 +02:00
Marian Buschsieweke
6294382627
cpu/stm32: Use mii.h for periph_eth
...
Use shared MII definitions and utilities instead own definitions.
2020-10-12 08:46:20 +02:00
Marian Buschsieweke
33d916b237
drivers/mii: Media-Independent Interface utils
...
Add utilities for working with Ethernet Media-Independent Interface for use by
Ethernet drivers.
2020-10-12 08:46:20 +02:00
Benjamin Valentin
b32bc3dbd1
drivers/kw41zrf: register with netdev
2020-10-08 16:19:23 +02:00
Benjamin Valentin
1afe72a5e5
drivers/enc28j60: register with netdev
2020-10-08 10:36:56 +02:00
benpicco
ab37c9fba1
Merge pull request #14949 from benpicco/drivers/mrf24j40-register
...
drivers/mrf24j40: register with netdev
2020-10-08 10:33:37 +02:00
Francisco
3918d714ce
Merge pull request #13624 from wosym/pr/candev_mcp2515
...
tests/candev: add mcp2515 + driver/mcp2515: add driver
2020-10-08 09:45:40 +02:00
Benjamin Valentin
a1d8c79a98
drivers/mrf24j40: pass long address via pointer
2020-10-07 16:39:39 +02:00
Benjamin Valentin
988ee1648f
drivers/mrf24j40: register with netdev
2020-10-07 16:39:39 +02:00
Marian Buschsieweke
5b9463aca1
drivers/netdev: Clarify documentation
2020-10-06 10:48:06 +02:00
Wouter Symons
757f810118
drivers/mcp2515: complete driver + adapt to 2020 RIOT API
2020-10-03 15:20:42 +02:00
Vincent Dupont
62a9929f9b
mcp2515: add a driver for the mcp2515 SPI CAN controller
...
This driver implements the candev interface
2020-10-03 15:20:42 +02:00
feac7dc978
drivers/pir: fix typo 'whan' -> 'when'
2020-10-02 08:06:16 +02:00
dc8d32d30e
drivers/periph/gpio: fix typo 'occured' -> 'occurred'
2020-10-02 08:05:55 +02:00
9236b6ca5c
drivers/ltc4150: fix typo 'tread' -> 'treat'
2020-10-02 08:05:31 +02:00
59297c3779
drivers/lc709203f: fix typo 'Invlid' -> 'Invalid'
2020-10-02 08:05:00 +02:00
5ef55e37d7
drivers/ina3221: fix typos
...
- 'measurment' -> 'measurement'
- 'enble' -> 'enable'
2020-10-02 08:04:23 +02:00
2f2eeb7a7b
drivers/at: fix typo 'correspondant' -> 'correspondent'
2020-10-02 08:03:10 +02:00
benpicco
6cb8da7813
Merge pull request #14950 from jia200x/pr/ieee802154/submac
...
ieee802154_submac: add initial support for common MAC sub layer
2020-10-01 11:31:52 +02:00
Jose Alamos
4bb77b0b2f
netdev/ieee802154_submac: add compatibility layer
2020-09-30 17:25:31 +02:00
benpicco
b2401eb73b
Merge pull request #14966 from HendrikVE/pr/driver/aip31068
...
driver/aip31068: add new driver
2020-09-30 15:52:52 +02:00
Hendrik van Essen
6778bf4b98
driver/aip31068: add new driver
2020-09-29 14:42:15 +02:00
Martine Lenders
cd8666735e
Merge pull request #15107 from benpicco/boards/samr21-xpro_edbg_eui
...
boards/samr21-xpro: fix reading EUI-64 from EDBG on cold boot
2020-09-29 11:04:04 +02:00
Benjamin Valentin
971c03eeb9
drivers/edbg_eui: add note on edbg startup time
2020-09-28 20:18:43 +02:00
7c029c7f43
Merge pull request #14907 from OTAkeys/pr/adcxx1c_get_alert
...
drivers/adcxx1c: add clear alert function
2020-09-28 13:28:15 +02:00
316871a4fa
Merge pull request #15068 from MrKevinWeiss/pr/dev_enum
...
drivers/dev_enums: Remove unused dev_enums.h
2020-09-25 17:35:21 +02:00
MrKevinWeiss
7893158b5a
drivers/dev_enums: Remove unused dev_enums.h
2020-09-24 09:27:39 +02:00
Viktor Gal
7ea8f738fd
Add support for Adafruit Seesaw Soil moisture sensor ( #14835 )
...
drivers/seesaw_soil: Add support for Adafruit Seesaw Soil moisture sensor
2020-09-23 17:35:33 +02:00
chrysn
9295f69da4
Merge pull request #15062 from kaspar030/fix_efm32_16b_timer_set_absolute
...
cpu/efm32/periph/timer: fix timer_set_absolute() in 16bit case
2020-09-23 11:28:00 +02:00
chrysn
d8d56e5e3a
periph/timer: Document that set_absolute is expected to wrap
...
Most timers are implemented this way already, and keeping (documenting)
it that way allows the generic timer_set implementation to stay as
simple as it is.
2020-09-23 10:59:18 +02:00
MrKevinWeiss
cc1c2ab811
drivers/periph: Remove unused timer enum from dev_enums
2020-09-22 16:26:01 +02:00
José Alamos
9c130cd2fd
Merge pull request #15032 from jia200x/pr/at86rf2xx/fix_overflow
...
drivers/at86rf2xx: fix at86rf2xx_set_rxsensitivity
2020-09-17 10:32:06 +02:00
Jose Alamos
074dc8d328
drivers/at86rf2xx: fix at86rf2xx_set_rxsensitivity
2020-09-16 14:47:51 +02:00
Benjamin Valentin
696ddf3dbb
drivers/periph/timer: amend documentation for timer_set_periodic()
...
The function needs the `periph_timer_periodic` feature.
Add a `@note` about that to the documentation.
2020-09-13 19:06:28 +02:00
benpicco
842933855f
Merge pull request #14995 from benpicco/cpu/cc2538-register
...
cc2538_rf: register with netdev
2020-09-11 16:03:08 +02:00
Benjamin Valentin
1811686540
cc2538_rf: register with netdev
2020-09-11 13:33:37 +02:00
Francisco
858533e68e
Merge pull request #14994 from benpicco/nrf802154-register
...
nrf802154: register with netdev
2020-09-11 12:48:40 +02:00
Cenk Gündoğan
0d0bc91553
Merge pull request #14754 from leandrolanzieri/pr/no_archives
...
build system: link object files
2020-09-10 09:36:29 +02:00
Benjamin Valentin
58dc106309
nrf802154: register with netdev
2020-09-10 00:05:25 +02:00
9b9ed236ba
Merge pull request #14916 from MrKevinWeiss/pr/slwstk6220a
...
drivers/periph: Remove UART from device_enums.h
2020-09-09 10:53:27 +02:00
fdaf7fd822
Merge pull request #14596 from benpicco/drivers/at86rf2xx-retries
...
drivers/at86rf2xx: support frame retry reporting on AT86RFR2
2020-09-09 10:27:05 +02:00
MrKevinWeiss
bdeb39576e
drivers/periph: Remove UART from dev_enums.h
2020-09-09 10:25:38 +02:00
Benjamin Valentin
0871b69c84
drivers/at86rf2xx: support frame retry reporting on at86rfr2
...
At86rfr2 doesn't report retries directly, but it can generate a TX start
interrupt for each (re)try, so we can count manually.
2020-09-08 14:48:57 +02:00
Benjamin Valentin
634714ff78
drivers/at86rf215: implement Reduced Power Consumption
...
Reduced Power Consumption is available for MR-O-QPSK and
MR-FSK.
In this mode the receiver will be turned off periodically,
defaulting to a 50% duty cycle.
This reduces power consumption when in IDLE RX by almost 50%
and is therefore enabled by default.
2020-09-07 13:48:47 +02:00
