danpetry
99ae495226
Merge pull request #10011 from leandrolanzieri/pr/drivers/ds18
...
drivers/ds18: Add Maxim Integrated 1-Wire temperature sensor driver
2018-10-25 17:26:10 +02:00
Martine Lenders
bd06f7e846
Merge pull request #10250 from bergzand/pr/at86rf2xx/reenable_ack_req
...
at86rf2xx: Re-enable ack requests by default
2018-10-25 14:08:35 +02:00
c3da55b015
at86rf2xx: Re-enable ack requests by default
...
Properly splitting the flags between netdev_ieee802154 and the at86rf2xx
driver had as side effect that the ACK REQ flag was no longer set by
default. This commit reverts the default settings by enabling it again
on startup. The current code calls the generic netdev setter to set the
flag.
2018-10-25 12:17:02 +02:00
Frits Kuipers
8b8790c18f
drivers/ds18: Add Maxim Integrated ds18 driver
...
tests/driver_ds18: Add test application for DS18B20 sensor.
tests/driver_ds18: Add whitelist of boards
2018-10-24 16:02:05 +02:00
PeterKietzmann
1bcb521469
drivers/at86rf233: extend doc for smart idle listening feature
2018-10-23 20:02:39 +02:00
Peter Kietzmann
f5379c05a3
Merge pull request #8971 from Hyungsin/forupstream_smart_idle_listening
...
drivers/at86rf2xx: add smart idle listening feature
2018-10-23 19:34:21 +02:00
danpetry
bed1e22e7d
sys/auto_init: Changes to support SAUL
...
SAUL read functionality implemented only, as described in
tsl4531x_saul.c.
This driver will work with SAUL in both low and high power modes,
with the startup mode configurable in tsl4531x_params.h.
2018-10-23 17:26:28 +02:00
danpetry
a1a834a726
drivers/tsl4531x: Add power modes; redesign
...
Changes include:
- Implementation of two power modes for the driver: low and high
- Redesign and API change to the description in tsl4531x.h
- Full documentation
- Changing file structure and implementation to fit best practices as
described in
https://github.com/RIOT-OS/RIOT/wiki/Guide%3A-Writing-a-device-driver-in-RIOT
- Including I2C addresses for the rest of the range
2018-10-23 17:26:28 +02:00
Juan Carrano
5604abcedc
drivers/tsl4531x: Add SAUL driver.
2018-10-23 17:26:28 +02:00
Juan Carrano
63dcc18c55
drivers/tsl4531x: Add driver for TSL45315 illuiminance sensor.
...
Missing run modes and power saving configurations, but otherwise
functional.
2018-10-23 17:26:28 +02:00
a8c2de12fa
Merge pull request #9870 from bergzand/pr/ethos/fix_recv_with_drop
...
ethos: Add drop frame case to recv function
2018-10-18 15:30:48 +02:00
José Alamos
b3ec93d957
Merge pull request #10088 from unwireddevices/riot-fix-adxl345
...
drivers/adxl345: fix ADXL345 driver
2018-10-16 16:34:41 +02:00
Kevin "Bear Puncher" Weiss
0628345364
Merge pull request #10093 from aabadie/pr/drivers/periph_eeprom_refactor
...
drivers/periph_eeprom: refactor implementation and test application
2018-10-16 16:30:40 +02:00
Semjon Kerner
5b0152f4f7
drivers/netdev_ieee802154: drop NETOPT_MAX_PKT_SIZE
2018-10-16 13:28:03 +02:00
Semjon Kerner
2728065be4
drivers/netdev_ieee802154: support NETOPT_MAX_PKT_SIZE
2018-10-16 13:27:21 +02:00
e9a6ebc409
cpu: drivers/eeprom: refactor periph_eeprom implementation
2018-10-16 10:39:10 +02:00
Gunar Schorcht
7fde6fc258
Merge pull request #6712 from aabadie/driver_vcnl4010
...
drivers/vcnl4010: initial implementation
2018-10-15 16:12:45 +02:00
f2c1355560
drivers/adxl345: move scale factor macro to internal implem
2018-10-15 15:00:04 +02:00
Leandro Lanzieri
7a39f03986
drivers/adxl345: Fix byte swap on reading function
2018-10-15 14:57:55 +02:00
Oleg Artamonov
acda8c8828
drivers/adxl345: macros cleanup
2018-10-15 14:57:55 +02:00
Oleg Artamonov
631c16fdb1
drivers/adxl345: fix range values
2018-10-15 14:57:55 +02:00
Oleg Artamonov
de5f38d134
drivers/adxl345: fix scale factor calc
2018-10-15 14:57:55 +02:00
Oleg Artamonov
fb65067d3a
drivers/adxl345: fix ADXL345 driver
2018-10-15 14:57:55 +02:00
Peter Kietzmann
b2c791c6cb
Merge pull request #10135 from miri64/cpu/enh/periph-gpio-irq-closing-endif
...
cpu, periph_gpio: mark closing #endif for MODULE_PERIPH_GPIO_IRQ
2018-10-15 13:41:02 +02:00
1ca44cf072
drivers/vcnl40x0: initial implementation
2018-10-15 11:44:10 +02:00
9cedd7e244
drivers/saul: add proximity sensor type
2018-10-15 11:44:04 +02:00
Kevin "Bear Puncher" Weiss
33aa604dd7
Merge pull request #10145 from gschorcht/drivers_hd44780_fix
...
drivers/hd44780: fix compilation errors
2018-10-12 09:51:15 +02:00
Hauke Petersen
5f50db07e8
misc: use correct hauke.petersen@fu email address
2018-10-11 12:20:37 +02:00
Gunar Schorcht
11be2035dd
drivers/hd44780: fix compilation errors
2018-10-11 08:21:28 +02:00
Martine Lenders
0598d5bcf1
periph_gpio: comment IRQ #endif correctly
2018-10-09 15:11:45 +02:00
Martine Lenders
a95957e513
Merge pull request #9992 from haukepetersen/fix_periph_gpiofeaturesscope
...
periph/gpio: fix scope of GPIO_IRQ submodule
2018-10-09 15:10:39 +02:00
0c53bebe1b
Merge pull request #10094 from silkeh/enable-bme280-doc
...
drivers/bmx280: improve documentation
2018-10-04 10:56:16 +02:00
Martine Lenders
aba75be827
netdev: fix return value and precondition doc
...
While reviewing #9942 I noticed that the documentation on the netdev
driver API is unclear and in some cases outright contradicting itself:
> ```
> @return number of bytes used from @p value
> @return `< 0` on error, 0 on success
> ```
IMHO this is unacceptable for such a central API where communication
This fixes a few things and also clarifies preconditions:
- Specifies negative `errno`s clearly so all drivers return the same
when required
- Re-iterates parameter preconditions and special cases within the
parameter documentation itself (might also help towards #9805?)
- Fixes contradictions within return value documentation
- Adds missing parameter documentation on `init()`.
2018-10-03 16:09:42 +02:00
Silke Hofstra
2fb2776012
drivers/bmx280: improve documentation
...
- Add minimal usage instructions
- Ensure that the `bme_280_read_humidity` function (only available on
the BME280) is included in the documentation.
- Fix a typo
2018-10-01 21:28:11 +02:00
Hauke Petersen
38750f1e30
drivers/l3g4200d: fix typo in src file header
2018-09-26 11:00:48 +02:00
6dfc07b076
drivers/sx127x: remove useless rx timeout setter
2018-09-25 22:22:13 +02:00
smlng
59e299635b
cppcheck: add/correct reason for cppcheck-suppress
...
Adding and correcting description/rational on why certain cppcheck
warnings or errors are intentionally suppressed.
2018-09-25 12:03:58 +02:00
Vincent Dupont
1f2985dfc6
Merge pull request #9952 from OTAkeys/at_fix_buffer_memset
...
at driver: allow using same buffer for command and response in at_send_cmd_get_lines()
2018-09-24 17:33:58 +02:00
Joakim Nohlgård
c4016fcf3b
Merge pull request #9978 from haukepetersen/fix_periph_gpiofeaturescopeanddoc
...
periph/gpio: fix doc of `periph_gpio_irq` submodule
2018-09-21 13:15:19 +02:00
1c2dd28c90
Merge pull request #9937 from dylad/fix_mutex_tsl2561
...
drivers/tsl2561: add missing acquire∕release functions
2018-09-21 10:28:42 +02:00
Hauke Petersen
bd66184eb2
periph/gpio: re-add irq functions to doxygen
2018-09-21 08:31:09 +02:00
Hauke Petersen
abc11c8e23
periph/gpio: fix scope of GPIO_IRQ submodule
...
Move the gpio_irq_enable() and gpio_irq_disable() functions
into the scope of the PERIPH_GPIO_IRQ submodule.
2018-09-21 08:30:29 +02:00
Semjon Kerner
b24de4a22a
drivers/srf04: initial driver implementation
2018-09-20 15:18:49 +02:00
semjonkerner
83711b4819
drivers/Makefile.dep: order modules alphabetically
2018-09-20 11:00:21 +02:00
semjonkerner
603c04e2cc
drivers/Makefile.dep: delete duplicate srf02 module
2018-09-20 11:00:21 +02:00
Leandro Lanzieri
5cc7b6711f
drivers/sx127x: add preliminar multi interrupt pin support
...
drivers/sx127x: add option to use or not multi dio
2018-09-18 14:02:31 +02:00
Toon Stegen
021ab9764a
at driver: fix at_send_cmd_get_lines bug
...
When reusing the same buffer for the at command and response, no command
would be sent because the buffer was cleared. This is fixed by only
clearing the buffer after the command has been sent.
2018-09-18 12:16:09 +02:00
761987ef0d
ethos: Add drop frame case to recv function
...
The ethos driver does not drop the received frame if the recv function
is called with NULL buffer and with a length. This commit fixes that.
2018-09-18 11:20:29 +02:00
dylad
014884264f
drivers/tsl2561: add missing acquire∕release functions
2018-09-14 14:10:08 +02:00
smlng
a9e848f648
periph/rtt: add missing std header
...
The periph/rtt.h uses `uintX_t` typedefs but misses the required
standard header file, namely `stdint.h`, which is added here.
2018-09-07 14:54:23 +02:00
