- Add FEATURES_REQUIRED_ANY to dependency-debug:
Now `make dependency-debug` by default also stores the contents of
`FEATURES_REQUIRED_ANY`.
- makefiles/features_check.inc.mk: Break long lines
- {tests/minimal,tests/unittests,bootloaders/riotboot}:
Disable auto_init_% in addition to auto_init.
This works around weird behavior due to the USEMODULE being recursively expended
in the first iteration of dependency resolution: Modules added to DEFAULT_MODULE
get automatically added to USEMODULE during the first run, but not for
subsequent. This should be iron out later on.
Goals:
- Untangle dependency resolution and feature checking for better maintainability
- Improve performance of "make info-boards-supported"
Changes:
- Makefile.dep
- Dropped handling of default modules and recursion
- Now only dependencies of the current set of used modules and pkgs are
added
==> External recursion is needed to catch transient dependencies
- Changed Makefile.features:
- Dropped checking of provided features
- Dropped populating FEATURES_USED with provided features that are required
or optional
- Dropped populating FEATURES_MISSING with required but not provided
features
- Dropped adding modules implementing used features to USE_MODULE
==> This now only populates FEATURES_PROVIDED, nothing more
- Added makefiles/features_check.inc.mk:
- This performs the population of FEATURES_USED and FEATURES_MISSING now
- Added makefiles/features_modules.inc.mk:
- This performs now the addition of modules implementing used features
- Added makefiles/dependency_resolution.inc.mk:
- This now performs the recursion required to catch transient dependencies
- Also the feature check is performed recursively to handle also required
and optional features of the transient dependencies
- DEFAULT_MODULES are added repeatedly to allow it to be extended based on
used features and modules
==> This allows modules to have optional dependencies, as these
dependencies can be blacklisted
- Use simply expanded variables instead of recursively expended variables
(`foo := $(bar)` instead `foo = $(bar)`) for internal variables during feature
resolution. This improves performance significantly for
`make info-boards-supported`.
- Reduce dependency resolution steps in `make info-boards-supported`
- Globally resolve dependencies without any features (including arch)
provided
==> This results in the common subset of feature requirements and modules
used
- But for individual boards additional modules might be used on top due
to architecture specific dependencies or optional features
- Boards not supporting this subset of commonly required features are not
supported, so no additional dependency resolution is needed for them
- For each board supporting the common set of requirements a complete
dependency resolution is still needed to also catch architecture specific
hacks
- But this resolution is seeded with the common set of dependencies to
speed this up
This adds cortexm_fpu to the DEFAULT_MODULE list when the feature
cortexm_fpu is provided by the architecture. It also moves the
dependency resolution of this module to the architecture-specific
Makefile.dep file.
This moves the following modules to a architecture-specific Makefile.dep
file:
- cortexm_common
- cortexm_common_periph
- newlib
- newlib_nano
- periph
An application/test/module that requires one feature out of a set of
alternatives (let's say either periph_uart, periph_spi, or periph_i2c) can
request this now using:
FEATURES_REQUIRED_ANY += periph_uart|periph_spi|periph_i2c
RFC4648 specifies an alternate alphabet for base64 encoding / decoding
where '+' and '/' are exchanged for '-' and '-' to make the resulting
string safe to use in filenames and URLs.
This adds a base64url_encode() function that uses the alternate alphabet.
The base64_decode() function is extended to accept both alphabets.
This adds a driver for the SPI based AT86RF215 transceiver.
The chip supports the IEEE Std 802.15.4-2015 and IEEE Std 802.15.4g-2012 standard.
This driver supports two versions of the chip:
- AT86RF215: dual sub-GHz & 2.4 GHz radio & baseband
- AT86RF215M: sub-GHz radio & baseband only
Both radios support the following PHY modes:
- MR-FSK
- MR-OFDM
- MR-O-QPKS
- O-QPSK (legacy)
The driver currently only implements support for legacy O-QPSK.
To use both interfaces, add
GNRC_NETIF_NUMOF := 2
to your Makefile.
The transceiver is able to send frames of up to 2047 bytes according to
IEEE 802.15.4g-2012 when operating in non-legacy mode.
Known issues:
- [ ] dBm setting values are bogus
- [ ] Channel spacing for sub-GHz MR-O-QPSK might be wrong
- [ ] TX/RX stress test will lock up the driver on openmote-b
If flasher is changed then make will still see it as a FLASH
dependency and try to execute the target which will likely not
exist.
A use case for this is when flashing on a remote machine and setting
FLASHER=ssh to then execute the FLASHER on the remote.
Declaring all auto_init_% modules as pseudomodules will allow
using auto_init_% modules as modules that can be disabled. This
will give a higher lever of granularity allowing users to not
disable the complete auto_init module but only some of them.
