Martine Lenders
363afa62ee
gnrc_netif: introduce 6LN flag
...
This makes it dynamically configurable if an interface actually want's
to use 6Lo ND (according to RFC 6775) or not.
2019-10-20 15:38:13 +02:00
Martine Lenders
8bcce5615e
gnrc_netif: use is_6lo() instead of is_6ln()
2019-10-20 15:38:13 +02:00
Jose Alamos
8fd0c2b60f
gnrc_netif: adapt to new netif_t abstraction
2019-10-11 10:59:14 +02:00
Martine S. Lenders
ada7c0b7db
gnrc_netif: avoid deprecated addresses, don't prefer them!
2019-10-09 15:18:14 +02:00
Martine S. Lenders
1ca05f0c08
gnrc_netif_ethernet: fix debug output for received packet
...
A received packet is outputted in DEBUG _after_ it was already parsed,
but with a reference to the already parsed header. The result is that
there can be some garbage in the output and the packet is not dumped in
total. As without parsing we do not have access to the header yet, we
use the `gnrc_netif_addr_to_str()` helper function instead of parsing
the destination address by hand.
2019-09-16 14:01:16 +02:00
Hauke Petersen
504acc5097
net/l2util: add nimble opt for addr resolution
2019-08-28 16:48:03 +02:00
Francisco
fde50372c3
Merge pull request #11837 from miri64/gnrc_netif/enh/inter-tx-wait
...
gnrc_netif: allow for wait of minimum time between sends
2019-08-09 10:53:26 +02:00
Martine Lenders
488c47cbf3
gnrc_netif: allow for wait of minimum time between sends
2019-08-09 10:21:42 +02:00
Martine S. Lenders
4a38dabc70
gnrc_netif_ieee802154: use gnrc_netif_hdr_set_netif()
2019-07-25 14:56:47 +02:00
Martine S. Lenders
006f10c2af
gnrc_netif_ethernet: use gnrc_netif_hdr_set_netif()
2019-07-25 14:15:37 +02:00
Martine Lenders
3c19aa7dfc
gnrc_netif_ieee802154: check if mhr_len is lesser than nread
2019-04-15 16:36:31 +02:00
Martine Lenders
768a117ade
gnrc_netif: fix fall-through comment
...
gcc 8.2.1 has problems with the comment being within the `#ifdef`
2019-03-27 19:45:40 +01:00
Martine Lenders
39fe2a30e4
gnrc_netif: use l2util for some functions
...
The following functions can now be wrapped around the more generalized
approach:
- gnrc_netif_ipv6_iid_from_addr()
- gnrc_netif_ipv6_iid_to_addr()
- gnrc_netif_ndp_addr_len_from_l2ao()
- gnrc_netif_eui64_from_addr()
2019-03-26 21:37:20 +01:00
Martine Lenders
05bca5b2cf
gnrc_netif: fix DEBUG output on error
...
`res` is an integer that is always negative in the given case, so using
`%u` here might be a little bit confusing.
2019-03-26 18:23:56 +01:00
Martine Lenders
bcb6b921d3
Merge pull request #11255 from aabadie/pr/gnrc_netif_nrfmin_fix
...
net/gnrc_netif/nrfmin: put NETOPT_PROTO assert at the right place
2019-03-24 15:01:50 +01:00
5fa2528185
net/gnrc_netif/nrfmin: put NETOPT assert at the right place
...
NETOPT depends on GNRC_SIXLOWPAN and should be moved inside the corresponding preprocessor conditional code
2019-03-24 14:34:12 +01:00
Jose Alamos
83ba971412
gnrc_netif: add NETDEV_TYPE_LORA to L2ADDR check
2019-03-24 11:10:41 +01:00
ccc09d9ed4
Merge pull request #11023 from miri64/gnrc_netif_ieee802154/enh/propagate-pend-frames
...
gnrc_netif_ieee802154: propagate pend. frame flag to stack
2019-03-15 12:51:50 +01:00
Martine Lenders
7d8f6abd45
gnrc_netif: check all required options on initialization
...
With `DEVELHELP` activated all required options required by GNRC are
now checked at interface initialization, so that developers of new
link-layer protocols or device drivers notice as soon as possible that
something is missing.
2019-02-26 16:45:21 +01:00
Martine Lenders
0f1bfad15b
gnrc_netif: provide addr_len_from_l2ao for nordic_softdevice_ble
2019-02-26 15:43:39 +01:00
Martine Lenders
13030d5a35
gnrc_netif: expose message queue size configurable
2019-02-26 13:26:20 +01:00
Martine Lenders
727a843ce4
Merge pull request #10905 from maribu/packet_size_l2_pdu
...
net: NETOPT_MAX_{PACKET_SIZE -> PDU_SIZE}
2019-02-22 15:23:00 +01:00
Martine Lenders
998b9ed0d4
gnrc_netif_hdr: make in parameters const
2019-02-21 12:43:08 +01:00
Marian Buschsieweke
4672368d5a
sys/net: NETOPT_MAX_{PACKET_SIZE -> PDU_SIZE}
...
Updated code to use NETOPT_MAX_PDU_SIZE instead of deprecated
NETOPT_MAX_PACKET_SIZE.
2019-02-18 20:15:08 +01:00
Martine Lenders
eac066a1e5
gnrc_netif_ieee802154: propagate pend. frame flag to stack
...
This way we can re-use the flag e.g. for forwarding
2019-02-15 14:46:43 +01:00
Peter Kietzmann
63fd8bc89b
Merge pull request #7577 from miri64/gnrc_netif2/feat/ieee802154-dup-bcast
...
gnrc_netif_ieee802154: drop duplicate broadcast packets (optionally)
2019-02-11 09:42:06 +01:00
Martine Lenders
985d98073f
gnrc_netif_ieee802154: drop duplicate broadcast packets (optionally)
2019-02-04 16:19:48 +01:00
Peter Kietzmann
2c5d1b013e
Merge pull request #10918 from maribu/cc110x_mtu
...
drivers/cc110x: Fixed MTU calculation
2019-02-04 09:44:10 +01:00
Marian Buschsieweke
dae680dcb2
sys/net: Added NETDEV_TYPE_CC110X to MTU init
2019-02-04 09:16:29 +01:00
smlng
6d0384f068
netstats: collect layer 2 netstats in gnrc_netif
...
This the first step in moving the collection of layer 2 netstats from
the low level driver to a central location, ie. gnrc_netif, to avoid
code duplication.
2019-02-01 10:35:03 +02:00
Martine Lenders
0fa8419c4a
gnrc_netif: wrap _ipv6_iid_from_addr() around _eui64_from_addr()
2019-01-29 21:52:53 +01:00
Martine Lenders
16e7fc8336
gnrc_netif: introduce L2 address to EUI-64 conversion
2019-01-29 21:52:53 +01:00
Martine Lenders
a2b2f96fe3
gnrc_netif: rename _create_iid_from_short() to emphesize EUI-64
2019-01-29 21:52:53 +01:00
Cenk Gündoğan
82f30fd8c4
Merge pull request #10514 from miri64/pkg/enh/nordic-softdevice-ble-mac48
...
pkg/nordic_softdevice_ble: Use MAC48 as hardware address
2019-01-17 19:22:36 +01:00
Martine Lenders
7f7bc8fc20
pkg/nordic_softdevice_ble: Use MAC48 as hardware address
...
This is just a compatibility issue waiting to happen as soon as there
is support for a more standard-compliant implementation of BLE (like
e.g. NimBLE ;-)).
2019-01-17 18:08:55 +01:00
Martine Lenders
55b9757044
gnrc_netif: centralize function to init IPv6 MTU
2019-01-16 15:52:54 +01:00
Martine Lenders
ea9bbd72b8
gnrc_netif: centralize function to get l2addr NETOPT
2019-01-16 15:52:54 +01:00
Martine Lenders
8f763535ac
gnrc_netif: centralize S/TLLAO length to address length function
...
The function to infer the link-layer address length from the length of
a S/TLLAO is very dependent on the IPv6 over X specification and thus
should be grouped with the other IP over X functions.
2019-01-16 15:52:53 +01:00
Cenk Gündoğan
6a4c764c95
Merge pull request #10569 from miri64/gnrc_netif/enh/rm-get-NETOPT_IPV6_IID
...
gnrc_netif: make _get_iid() just wrapper around _iid_from_addr()
2019-01-14 14:09:34 +01:00
Martine Lenders
7ae90564d9
gnrc_netif: make _get_iid() just wrapper around _iid_from_addr()
...
This way the IID generation gets much simplified and code duplication
is avoided since it removes GNRC's requirement for NETOPT_IPV6_IID.
2019-01-14 13:42:58 +01:00
Gunar Schorcht
dbb5e886e5
gnrc_netif_ieee802154: use pid member in netif header
...
Use the `gnrc_netif_t::pid` member instead of the pid of the current thread when generating the the `gnrc_netif_hdr` in `gnrc_netif_ieee802154::_recv` function.
2019-01-10 00:09:52 +01:00
Gunar Schorcht
3876dd4bb9
gnrc_netif_ethernet: use pid member in netif header
...
Use the `gnrc_netif_t::pid` member instead of the pid of the current thread when generating the the `gnrc_netif_hdr` in `gnrc_netif_ethernet::_recv` function.
2019-01-10 00:09:24 +01:00
Martine Lenders
481f742c71
gnrc_netif: interface configuration for 6LoENC
2019-01-04 13:32:24 +01:00
b77c802f9b
Merge pull request #10666 from miri64/netopt/new/6lo
...
netopt: provide option to (de-)activate 6Lo
2019-01-03 18:50:31 +01:00
Martine Lenders
45b9dd6f50
gnrc_netif: implement get NETOPT_6LO
2019-01-03 16:21:52 +01:00
Timo Rothenpieler
814e4ecbbe
gnrc_netif: ESP-NOW talks 6Lo now
2018-12-29 13:15:44 +01:00
Hauke Petersen
ec37ff5825
gnrc/netif: use eui48_x() for IID handling
2018-12-06 22:02:01 +01:00
Hauke Petersen
92fcb4de6a
Merge pull request #10513 from miri64/gnrc_netif/enh/iid-conversion
...
gnrc_netif: add general IID to/from l2addr conversion functions
2018-12-06 15:57:06 +01:00
Martine Lenders
a44f7f7b38
gnrc_netif: use general IID conversion function for netif-based
2018-12-06 14:41:30 +01:00
Martine Lenders
5ca30b9b03
gnrc_netif: add general IID to/from l2addr conversion functions
...
They are required to make GNRC's 6Lo IPHC implementation ready for
hardware addresses other than IEEE 802.15.4's.
2018-12-06 14:41:30 +01:00
Martine Lenders
08524ca1d2
gnrc_netif_hdr: move path resolve to gnrc_netif submodule resolution
...
No that we introduced sub-modules to `gnrc_netif` we can move that here
as well.
2018-12-05 15:04:45 +01:00
Martine Lenders
72c5fd06b4
gnrc_netif: make link-layer specific operations proper submodules
2018-12-05 15:04:04 +01:00
Martine Lenders
6547b2185b
gnrc_netif: remove ESP-Now related code-duplication
2018-11-29 15:32:09 +01:00
Martine Lenders
03b91cbcb8
esp_now: use NETDEV_TYPE_ESP_NOW as device type
2018-11-29 13:35:20 +01:00
Hauke Petersen
ace5db70e8
net/gnrc_netif: opt of _ipv6_get_iid()
2018-11-22 15:30:11 +01:00
Joakim Nohlgård
52ac53b4d9
gnrc_netif_ieee802154: Provide LQI, RSSI in raw mode via netif_hdr
...
Useful in sniffer situations to see the signal strength of a received
packet. Also avoids the crash described in
https://github.com/RIOT-OS/applications/pull/54
2018-10-27 00:22:51 +02:00
Gaëtan Harter
c5deac4865
Merge pull request #10023 from miri64/gnrc_netif/fix/no-addr-but-addr-len
...
gnrc_netif: Fix l2addr_len > 0, but no l2addr edge-case
2018-10-25 14:31:32 +02:00
Kevin "Bear Puncher" Weiss
7187bbf8cf
Merge pull request #9426 from gschorcht/esp32
...
ESP32 port
2018-10-16 15:24:25 +02:00
Schorcht
3ac99877ac
cpu: add esp32
2018-10-08 12:20:49 +02:00
Peter Kietzmann
ed24d3622a
Merge pull request #9621 from bergzand/pr/netif/use_fmt
...
gnrc_netif: Use fmt for bytes to hex string
2018-10-04 14:34:37 +02:00
0d71c1ccf7
gnrc_netif: Use fmt for bytes to hex string
2018-10-04 13:34:18 +02:00
90ad1a0782
gnrc_netif_ieee802154: remove state access in recv
...
This replaces the netif->state accesses in netif::recv with a netdev call
and the new netif RAWMODE flag
2018-10-03 21:00:35 +02:00
3c032e5688
gnrc_netif: add rawmode flag
...
Adds a gnrc_netif specific rawmode flag to indicate that the netdev
device is configured in raw mode. This flag is kept in sync with a
possible flag in the netdev device and should only be modified via the
setter call.
2018-10-03 20:59:03 +02:00
Martine Lenders
05aa8ab66b
gnrc_netif: assert that l2addr_len is 0 without address
...
If the device provides an address length, but no address it is
obviously faulty.
2018-09-25 18:45:32 +02:00
05b6af466c
sys: add missig <string.h> includes
2018-09-20 23:47:40 +02:00
Joakim Nohlgård
6d6a6efac7
gnrc_netif: Check return value of netdev init during thread start
2018-08-24 12:11:12 +02:00
Joakim Nohlgård
a247d8bfa5
gnrc_netif_ieee802154: set Frame Pending bit sometimes
...
Set frame pending bit in IEEE 802.15.4 FCF when
GNRC_NETIF_HDR_FLAGS_MORE_DATA is set on the netif header on outbound
frames.
2018-08-13 09:27:18 +02:00
smlng
d4e8c57621
gnrc_netif: generalise address search functions
...
Reduce code duplication by combining internal helper functions
that either loop over interface addresses or multicast groups.
2018-08-06 16:28:48 +02:00
smlng
7cb41ba829
gnrc_netif: cleanup debug output
...
Correct typos and wording in debug output.
2018-08-06 16:28:48 +02:00
smlng
8e3953cd6c
gnrc_netif: cleanup address matching
...
Cleanup of internal helper functions for IPv6 address matching.
2018-08-06 16:28:48 +02:00
30e683ccfe
gnrc_netif: reapply event flags on device reset
...
On a NETOPT_STATE set call with NETOPT_STATE_RESET the netdev device
resets the callback event flags. This requires that after the netdev
device resets, the network stack also reapplies these callback event
flags
2018-07-19 14:51:14 +02:00
ea6a2ef494
gnrc_netif_ieee802154: drop frame on buffer error
...
This adds a netdev recv call to indicate that the received frame should be
dropped when there is no buffer space available to store the frame.
2018-07-12 16:15:00 +02:00
Martine Lenders
8d47210228
gnrc_netif: don't spam user if dev doesn't support NETOPT_RX/TX_END_IRQ
2018-07-09 17:23:31 +02:00
Joakim Nohlgård
bbf4f1e453
gnrc_netif: Enable RX and TX complete events after netdev init
2018-06-29 21:53:23 +02:00
Martine Lenders
55adbee488
gnrc_ipv6_nib: add full RFC4862 DAD support
...
Parts of [RFC4862] were already implemented when NDP via the NIB was
first implemented. This change just includes the DAD portion of
[RFC4862]. This should be enough to make RIOT fully RFC4862 compliant.
[RFC4862]: https://tools.ietf.org/html/rfc4862
2018-05-31 17:11:25 +02:00
Martine Lenders
fce5c758f7
Merge pull request #8841 from miri64/netif/api/initial2
...
netif: Initial import of a common network interface API (second try)
2018-05-29 22:10:50 +02:00
Martine Lenders
a082e10157
gnrc_netif: add GNRC specific implementation of netif.h
2018-05-29 19:49:29 +02:00
Martine Lenders
ea64d39e21
gnrc_netif: fail IPv6 address addition if no space for solicited nodes
2018-05-29 19:30:30 +02:00
Martine Lenders
53c30eef4b
gnrc_netif: check if input for address search is ::
2018-04-03 17:38:26 +02:00
2f179f26bb
sys/net/gnrc/netif: adapt to netdev with iolist
2018-03-06 14:00:31 +01:00
Daniel Krebs
cbc9121ad4
gnrc/netif: fix source address selection for non-matching prefixes
...
According to RFC 6724 ch. 5 rule 8, the source address candidate with
the longest matching prefix has to be selected. The current
implementation discards source addresses that have no matching prefix
(`match = 0`) which is perfectly fine for any global address.
2018-02-08 13:46:46 +01:00
Martine Lenders
d4661af4c8
gnrc: 6Lo fixes for BLE
2018-02-05 22:34:31 +01:00
Martine Lenders
51ae9d9c87
nordic_softdevice_ble: fixes for gnrc_netif usage
2018-02-05 22:34:11 +01:00
Sören Tempel
cfe0143eec
gnrc_netif: Fix out-of-bounds buffer access in ieee802154 netif
2018-02-03 13:08:59 +01:00
Martine Lenders
c40a05b6a8
gnrc: fix link-layer/IPv6 address conversion for XBee
2018-01-31 10:54:28 +01:00
Martine Lenders
d0140a9ec8
Merge pull request #8380 from miri64/gnrc_netif/enh/6lo-nrfmin
...
gnrc_netif: set-up 6Lo for NRFmin
2018-01-23 11:17:29 +01:00
Martine Lenders
851eb767be
gnrc_netif: set-up 6Lo for NRFmin
2018-01-18 13:00:25 +01:00
smlng
026bc281ae
gnrc/netif: fix format error in debug output
2018-01-17 15:25:15 +01:00
7b72f623d2
gnrc: netif2: DEBUG fixes
2018-01-15 14:37:05 +01:00
Martine Lenders
c6833704dc
gnrc_netif: add nrfmin IID support
...
Adds a `nrfmin` case to IID generation, so an IID can be generated
from a `nrfmin` device's (short) address (the long address is just
4-time repetition of the short address).
2018-01-05 13:06:35 +01:00
Martine Lenders
3a493436ba
gnrc_netif: generalize IID generation for short addresses
...
Moves setting of addresses of length lesser than 3 to a function that
initializes the first 5 byte of the IID with `00:00:00:ff:fe` and then
fills up the rest with zeroes and the given short address.
2018-01-05 13:06:35 +01:00
17ac0fa3a7
Merge pull request #8101 from miri64/gnrc_netif2/opt/flag-checkers
...
gnrc_netif: assume flag settings on compile time
2017-12-19 12:10:25 +01:00
Martine Lenders
7b5a42ba58
gnrc_netif: assume flag settings on compile time
2017-12-19 12:04:36 +01:00
Martine Lenders
8a058d32f9
gnrc_netif: pass up returned error of internal function
...
If there is no space left on the interface, a user should be notified
about that when using `gnrc_netapi_set()`
2017-12-18 17:01:17 +01:00
3a572d82cd
Merge pull request #8252 from miri64/gnrc_netif/api/rename-ipv6_addr
...
gnrc_netif: rename IPv6 address "setters"
2017-12-18 17:00:31 +01:00
PeterKietzmann
70810ae697
sys/netif: include release of iovec in gnrc_netif_raw
2017-12-13 17:29:10 +01:00
PeterKietzmann
6295e4a7c9
sys/netif: add missig pkt release in gnrc_netif_raw
2017-12-13 15:44:39 +01:00
Martine Lenders
2ae30cf582
gnrc_netif: rename IPv6 address "setters"
...
This renames the following functions
* `gnrc_netif_ipv6_addr_add()`
* `gnrc_netif_ipv6_addr_remove()`
* `gnrc_netif_ipv6_group_join()`
* `gnrc_netif_ipv6_group_leave()`
by appending the suffix `_internal`.
\## Reasoning
I'd like to provide a helper function for the *public* equivalent using
`gnrc_netapi_set()`, and those names are to nice to not be taken for
those.
\## Procedure
I used a combination of `git grep` and `sed` to do this and fixed the
alignment in the result of some cases by hand.
```sh
git grep --name-only "\<gnrc_netif_ipv6_\(addr\|group\)_\(add\|remove\|join\|leave\)\>" | \
xargs sed -i 's/\<gnrc_netif_ipv6_\(addr\|group\)_\(add\|remove\|join\|leave\)/\0_internal/g'
```
2017-12-13 13:50:39 +01:00
039bdf2aa6
gnrc_netif: Fix debug printing in ieee802154
2017-12-05 14:49:48 +01:00
ef8222e4bd
gnrc_netif: Include od when debugging
2017-12-05 14:48:02 +01:00
