Martine Lenders
a2c14b33ff
Merge pull request #11053 from cladmi/pr/tests/bloom_bytes/float_handling
...
tests/bloom_bytes: replace %f with fmt/print_float
2019-02-26 21:27:02 +01:00
Martine Lenders
dd1f45d05e
tests: adapt tests for gnrc_netif checks
2019-02-26 16:46:29 +01:00
Martine Lenders
727a843ce4
Merge pull request #10905 from maribu/packet_size_l2_pdu
...
net: NETOPT_MAX_{PACKET_SIZE -> PDU_SIZE}
2019-02-22 15:23:00 +01:00
Gaëtan Harter
642f5e4809
tests/bloom_bytes: explicitely expect a float
...
The last line should be a float lower than 1 so 0.XXX.
So expect it to match this.
This should prevent issues when float printing does not work.
2019-02-21 16:19:47 +01:00
Gaëtan Harter
124e1dd3fa
tests/bloom_bytes: replace %f with fmt/print_float
...
Even if using `%f` the `printf_float` module was not used.
When running the test on `samr21-xpro` and `arduino-mega2560` the float
is not printed correctly.
* samr21-xpro ` false positive rate.`
* arduino-mega2560 `? false positive rate.`
As the arduino-mega2560 does not handle printf_float use
`fmt/print_float`.
The output should be flushed before using fmt/print functions if
available as they do not use `printf` buffer.
2019-02-21 16:19:38 +01:00
Gaëtan Harter
f5c79ba821
tests/bloom_bytes: define regexp as raw strings
...
Python strings for regular expression should be declared as `raw` so `\`
is not re-interpreted.
This fixes `flake8` warning.
2019-02-21 16:19:27 +01:00
a4c4cd9605
tests/pkg_relic: add hifive1 to blacklist
2019-02-21 14:24:55 +01:00
Sebastian Meiling
92b3558b4b
Merge pull request #11047 from kaspar030/fix_tests_periph_timer_for_hifive1
...
tests/periph_timer: add hifive1 exception
2019-02-21 14:39:57 +02:00
332b06a319
tests/periph_timer: add hifive1 exception
2019-02-21 11:40:30 +01:00
c16bd3871c
tests/lwip_sock_ip: fix memcpy lenghts
...
sizeof(ip6_addr_t) > 16 depending on compilation flags, possibly reading
more data than available.
Fix by using the actual address' sizeof for memcpy.
2019-02-21 11:30:25 +01:00
Peter Kietzmann
654fd4fba5
Merge pull request #10999 from cladmi/pr/tests/rng/print_float
...
tests/rng: replace printf_float with fmt/print_float
2019-02-21 11:11:46 +01:00
Gaëtan Harter
27b42d34d3
tests/rng: replace printf_float with fmt/print_float
...
When running the test on `arduino-mega2560` printing the float failed
and was printed as ` ?`.
Calculated ? bits of entropy from 10000 samples.
Replace using `printf` floating point printing by using `fmt/print_float`.
Now the test succeeds on `arduino-mega2560`.
As `print_float` does not buffer and is used with `printf` the output
should be flushed before calling it if `fflush` is available.
2019-02-21 10:42:04 +01:00
Gaëtan Harter
44d2b62a70
tests/rng: fix cppcheck error shiftTooManyBitsSigned
...
cpp check is reporting the following error
error (shiftTooManyBitsSigned):
Shifting signed 32-bit value by 31 bits is undefined behaviour
Fix by ensuring the `1` is an `uint32_t` before shifting.
2019-02-21 10:41:33 +01:00
Marian Buschsieweke
9216607163
tests/gnrc_ipv6_nib_6ln: Refactored code
...
Improved readability of if statements. This issue was pointed out by cppcheck.
2019-02-19 13:00:05 +01:00
Leandro Lanzieri
5d481c2a68
Merge pull request #9838 from gebart/pr/ds3234-pps
...
ds323x: Minimal driver for DS323x extremely accurate RTC
2019-02-19 12:52:24 +01:00
Joakim Nohlgård
a6f430b4b5
drivers/ds3234: Minimal driver for DS3234 extremely accurate RTC
...
This driver currently only supports the SPI connected DS3234, and only
for initializing 1 Hz square wave output on the SQW pin, nothing else.
2019-02-19 11:57:40 +01:00
Peter Kietzmann
dd664a88fd
Merge pull request #10963 from brummer-simon/gnrc_tcp-fix_test_setup
...
gnrc_tcp: change and verify addrs in use
2019-02-19 09:32:53 +01:00
Marian Buschsieweke
1b5f615554
tests/driver_at86rf2xx: Use NETOPT_MAX_DPU_SIZE
...
Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:20 +01:00
Marian Buschsieweke
0c03c63c0e
tests/lwip_sock_ip: Use NETOPT_MAX_DPU_SIZE
...
Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:18 +01:00
Marian Buschsieweke
829a8b1792
tests/lwip_sock_udp: Use NETOPT_MAX_DPU_SIZE
...
Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:16 +01:00
Marian Buschsieweke
5189ac4d19
tests/gnrc_sixlowpan: Use NETOPT_MAX_DPU_SIZE
...
Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:13 +01:00
Marian Buschsieweke
4c0469f9d3
tests/gnrc_ipv6_nib_6ln: Use NETOPT_MAX_DPU_SIZE
...
Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:11 +01:00
Marian Buschsieweke
db83b363db
tests/gnrc_ndp: Use NETOPT_MAX_DPU_SIZE
...
Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:09 +01:00
Marian Buschsieweke
80c202f3e5
tests/gnrc_ipv6_nib: Use NETOPT_MAX_DPU_SIZE
...
Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:07 +01:00
Marian Buschsieweke
6efd1f840a
tests/gnrf_netif: Use NETOPT_MAX_DPU_SIZE
...
Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:04 +01:00
ac775b8ae5
Merge pull request #9181 from haukepetersen/opt_event_independencefromthread
...
sys/event: make event queue independent from thread
2019-02-16 13:50:14 +01:00
Simon Brummer
63ea8080f6
gnrc_tcp: fix test setup
2019-02-16 08:23:20 +01:00
Leandro Lanzieri
aefdc6550c
tests: Add test for AD7746 driver
2019-02-15 13:37:45 +01:00
Juan I Carrano
643de0a857
Merge pull request #11005 from cladmi/pr/test/periph_eeprom/use_eeprom_clear_byte
...
tests/periph_eeprom: use EEPROM_CLEAR_BYTE
2019-02-12 18:00:53 +01:00
Gaëtan Harter
8e4b11cdd0
Merge pull request #10369 from miri64/gnrc_ipv6_nib/fix/arsm-16-bit
...
gnrc_ipv6_nib/arsm: ensure proper int width in backoff calculation
2019-02-12 17:54:52 +01:00
Martine Lenders
f5086e76df
tests/unittests: add tests for exponential NS backoff
2019-02-12 17:01:14 +01:00
Gaëtan Harter
c894b67733
tests/periph_eeprom: take EEPROM_CLEAR_BYTE into account
...
After being cleared, the memory can be `0xFF` for `atmega` platforms for
example.
Fix the test to take EEPROM_CLEAR_BYTE into account.
2019-02-12 16:37:42 +01:00
Gaëtan Harter
3058c8c645
tests/periph_eeprom: use memcmp for cleared bytes
...
`strcmp` was used to check that the 4 bytes were empty but was not
testing what it should as an empty string is `0` bytes long.
The whole must be verified.
2019-02-12 16:37:42 +01:00
Gaëtan Harter
7455e0b6fe
tests/periph_eeprom: use memcmp
...
Use `memcmp` where it is obvious it is not doing a string comparison.
2019-02-12 16:37:42 +01:00
Gaëtan Harter
6d8fd279ac
tests/periph_eeprom: remove useless casts
...
Casting to `const char *` is not necessary as input, the type are
already the right ones.
It could not be before as `result` was with the wrong type.
2019-02-12 16:37:42 +01:00
Gaëtan Harter
c029fcde11
tests/periph_eeprom: fix 'results' type
...
Results type should only be an array of char, not an array of pointers.
2019-02-12 16:37:42 +01:00
Martine Lenders
875377d622
tests/unittests: suppress cppcheck redundantAssignment warning
...
To make the CI happy ;-).
2019-02-08 23:35:37 +01:00
Martine Lenders
2451fb36f8
tests: add unittest for state corruption in NC cache-out
2019-02-08 19:22:51 +01:00
Kees Bakker
50ec5130d6
drivers: add support for SHT2x (I2C temp and humidity sensor)
...
Several parts were inspired by a driver written by:
George Psimenos (gp7g14@soton.ac.uk )
Steffen Robertz (steffen.robertz@rwth-aachen.de )
2019-02-05 22:17:30 +01:00
PeterKietzmann
b2857529ef
tests/gnrc_tcp_server: don't set PORT=tap0 as default
2019-02-05 15:01:12 +01:00
PeterKietzmann
e03bbb4f2e
tests/gnrc_tcp_client: don't set PORT=tap1 as default
2019-02-05 15:01:05 +01:00
Kevin "Bear Puncher" Weiss
7dc243e3cc
Merge pull request #10220 from bergzand/pr/crypto/chacha20poly1305
...
chacha20poly1305: Initial implementation of AEAD cipher.
2019-02-04 12:52:24 +01:00
f4a4f5d0b1
chacha20poly1305: Provide a test based on the rfc
...
Add a test case to the crypto tests testing the chacha20poly1305
algorithm with the test vectors from rfc 8439.
2019-02-04 09:29:26 +01:00
Martine Lenders
73d72c0c52
Merge pull request #10893 from aabadie/pr/tests/periph_rtt
...
tests/periph_rtt: add Python script for automatic testing + use 5s delay between Hellos
2019-02-01 10:20:46 +01:00
Kevin "Bear Puncher" Weiss
1d693403b6
Merge pull request #10743 from yegorich/uart-enhanced-settings
...
RFC: UART enhanced settings
2019-01-31 17:11:28 +01:00
Sebastian Meiling
805efb69c5
Merge pull request #10458 from MichelRottleuthner/pr_driver_sds011
...
add driver for SDS011 active laser dust sensor
2019-01-31 15:54:09 +02:00
Yegor Yefremov
2673b662af
tests/periph_uart: add tests for uart_mode
...
Add positive and negative tests for data bits, stop bits and parity:
- 7E1, 7O1
- 8E1, 8O1
- 8N2
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-01-31 14:15:20 +01:00
Yegor Yefremov
738cbf685b
tests/periph_uart: add support for changing serial
...
Add command mode that will be used like this:
mode <dev> <data bits> <parity> <stop bits>
This command must be called after init otherwise
the UART won't be fully initialized.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-01-31 14:15:20 +01:00
6a570f3a82
tests/periph_rtt: add automatic testing script
2019-01-31 10:47:05 +01:00
aee4771a42
tests/periph_rtt: use a 5s delay between each hello
2019-01-31 10:46:56 +01:00
