19686: sys/string_utils: add memchk() r=maribu a=benpicco
19687: tests/unittests: remove old workaround for SAML1X and gcc9.X bug r=maribu a=dylad
### Contribution description
This reverts #13462, this workaround is no longer needed with newer GCC version.
### Testing procedure
Try to compile tests/unittests for `saml11-xpro` or `saml10-xpro`
### Issues/PRs references
This is a revert of #13462.
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
19610: drivers/periph/rtc: improve doc on rtc_set_alarm r=maribu a=maribu
### Contribution description
- point out behavior on denormalized time stamps
- use errno codes to indicate errors (and adapt the few instances of actual error handling to use them)
19670: cpu/stm32: stm32f4 BRR from BSRR r=maribu a=kfessel
### Contribution description
sometimes one wants to save one instruction :)
just write the bits we need to write.
### Testing procedure
tests/periph/gpio_ll tests this
### Issues/PRs references
`@maribu` might know some reference
maybe #19407
19678: gnrc_sixlowpan_iphc: fix NULL pointer dereference r=maribu a=miri64
19679: gnrc_sixlowpan_frag_sfr: fix ARQ scheduler race-condition r=maribu a=miri64
19680: gnrc_sixlowpan_frag_rb: fix OOB write in _rbuf_add r=maribu a=miri64
19681: sys/xtimer: improve documentation r=maribu a=maribu
### Contribution description
- Add a warning that xtimer is deprecated, so that new code hopefully starts using ztimer
- Add a hint that `ztimer_xtimer_compat` can be used even after `xtimer` is gone
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
Co-authored-by: Martine Lenders <m.lenders@fu-berlin.de>
19618: cpu/stm32: fix riotboot settings for L4 and WB r=benpicco a=gschorcht
### Contribution description
This PR fixes the `riotboot` configuration for L4 and WB.
The family is not called `stm32l4` or `stm32wb` but `l4` and `wb`. That is, the `riotboot` configuration didn't work at all. Furthermore, a minimum `RIOTBOOT_LEN` of `0x2000` is required for L4.
Found when investigating the compilation errors for `bootloaders/riotboot_serial` in PR #19576.
### Testing procedure
1. Green CI.
2. Use the following commands:
```
BOARD=nucleo-l496zg make -C tests/riotboot info-debug-variable-RIOTBOOT_HDR_LEN
BOARD=p-nucleo-wb55 make -C tests/riotboot info-debug-variable-RIOTBOOT_HDR_LEN
```
In master these commands give
```
0x400
```
With this PR these commands give
```
0x200
```
as expected.
3. Use the following commands:
```
BOARD=nucleo-l496zg make -C tests/riotboot info-debug-variable-RIOTBOOT_LEN
BOARD=p-nucleo-wb55 make -C tests/riotboot info-debug-variable-RIOTBOOT_LEN
```
In master these commands give
```
0x1000
```
With this PR these commands give
```
0x2000
```
as expected.
### Issues/PRs references
19639: tests/net/gnrc_mac_timeout: add automated test r=aabadie a=aabadie
19644: gnrc_ipv6_nib: include RIO with all subnets in downstream RA r=benpicco a=benpicco
19649: gnrc_sixlowpan_iphc: prefix bits outside context must be zero r=benpicco a=benpicco
19656: gnrc/ipv6_auto_subnets: allow to configure minimal prefix length r=benpicco a=benpicco
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19335: ipv6/nib: 6LBR should not send RS on their downstream interface r=fabian18 a=fabian18
19581: cpu/samd5x: enable FDPLL1 at 200MHz r=benpicco a=dylad
### Contribution description
This PR allows to use the second FDPLL (the first one is used to generated the 120MHz frequency used by the core and some peripherals). The second FDPLL is setup to run at 200MHz which is the maximum allowed by this MCU.
In fact, I reused the existing function which setup FDPLL0 so it can be used in a generic way for both PLL (since they are the same IP).
I change the way the computation offset (left shift by 5) is done because 200MHz << 5 wouldn't fit inside an `uint32_t` and I wanted to avoid using an `uint64_t` here
Two additional commits are present for a small cleanup and a fix.
This is currently unused in our codebase, so it shouldn't impact this platform too much as the `ONDEMAND` bit is set. the FDPLL will not be running out of the box. But `@gschorcht` might need it pretty soon.
### Testing procedure
This PR can be tested on a `same54-xpro` and an oscilloscope using the following the patch:
```
From 76490845ec72387b24116bdd364a61365c186aa1 Mon Sep 17 00:00:00 2001
From: Dylan Laduranty <dylan.laduranty@mesotic.com>
Date: Thu, 11 May 2023 17:42:16 +0200
Subject: [PATCH] removeme! for debug purpose
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
---
cpu/samd5x/cpu.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/cpu/samd5x/cpu.c b/cpu/samd5x/cpu.c
index f778991a5b..2866c8c9e5 100644
--- a/cpu/samd5x/cpu.c
+++ b/cpu/samd5x/cpu.c
`@@` -220,7 +220,7 `@@` static void fdpll_init(uint8_t idx, uint32_t f_cpu)
}
static void gclk_connect(uint8_t id, uint8_t src, uint32_t flags) {
- GCLK->GENCTRL[id].reg = GCLK_GENCTRL_SRC(src) | GCLK_GENCTRL_GENEN | flags | GCLK_GENCTRL_IDC;
+ GCLK->GENCTRL[id].reg = GCLK_GENCTRL_SRC(src) | GCLK_GENCTRL_GENEN | flags | GCLK_GENCTRL_OE | GCLK_GENCTRL_IDC;
while (GCLK->SYNCBUSY.reg & GCLK_SYNCBUSY_GENCTRL(id)) {}
}
`@@` -384,6 +384,12 `@@` void cpu_init(void)
dma_init();
#endif
+ sam0_gclk_enable(SAM0_GCLK_200MHZ);
+ /* output both FDPLL (GCLK0 and GCLK4) to gpios */
+ gpio_init_mux(GPIO_PIN(PB, 14), GPIO_MUX_M);
+ gpio_init_mux(GPIO_PIN(PB, 10), GPIO_MUX_M);
+ /* PB14 -> EXT2 PB10 -> QSPI SCK */
+
/* initialize stdio prior to periph_init() to allow use of DEBUG() there */
early_init();
--
2.35.3
```
It will output both FDPLLs to PB14 and PB10. Their frequency can then be measured using an oscilloscope.
### Issues/PRs references
None.
19612: pkg/ndn-riot: drop unmaintained pkg r=benpicco a=maribu
### Contribution description
Upstream [1] has seen no activity since 2018, so it safe to assume this is dead. It is reasonable to assume that any users - if there ever were any - have moved on.
Fixes https://github.com/RIOT-OS/RIOT/issues/15638
[1]: https://github.com/named-data-iot/ndn-riot
19643: examples/suit_update: some test fixes r=aabadie a=kaspar030
19655: net/ipv6: make use of clz in ipv6_addr_match_prefix() r=benpicco a=benpicco
Co-authored-by: Fabian Hüßler <fabian.huessler@st.ovgu.de>
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19611: sys/net/rpl: fix possible NULL dereference r=benpicco a=maribu
### Contribution description
As the title says
19640: core/thread: drop unused thread_arch_t r=benpicco a=maribu
### Contribution description
No architecture makes use of thread_arch_t anymore, so let's drop it.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19523: boards/iotlab-m3: enable l3g4200d_ng r=benpicco a=benpicco
19527: drivers/sdcard_spi: small cleanup r=benpicco a=gschorcht
### Contribution description
This PR provides a small cleanup:
- the copy of `sdcard_spi_params_t` is removed (commit bfc2a51f70)
- the documentation was changed to fit the 100 characters per line. (commit 36f0162b34)
It is not necessary to hold a complete copy `sdcard_spi_params_t` in the device descriptor. Constant parameters can be used directly from ROM instead. This saves 24 bytes of RAM.
### Testing procedure
Use any board with SD Card SPI interface. The driver test should still work, for example:
```
BOARD=esp32-wrover-kit make -j8 -C tests/driver_sdcard_spi flash term
```
```
main(): This is RIOT! (Version: 2023.07-devel-176-g7213c-drivers/sdcard_spi_cleanup)
SD-card spi driver test application
insert SD-card and use 'init' command to set card to spi mode
WARNING: using 'write' or 'copy' commands WILL overwrite data on your sd-card and
almost for sure corrupt existing filesystems, partitions and contained data!
> init
Initializing SD-card at SPI_0...
[OK]
>
```
### Issues/PRs references
19530: sys/xtimer: add missing "modules.h" include to `xtimer.h` r=benpicco a=kaspar030
19532: tests/unittests: tests-core-mbox: add missing `container.h` include r=benpicco a=kaspar030
19533: core: move macros/math.h to core/lib/include/macros r=benpicco a=kaspar030
19535: nanocoap_sock: defuse nanocoap_sock_get() API footgun r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
18620: core: add core_mutex_debug to aid debugging deadlocks r=maribu a=maribu
### Contribution description
Adding `USEMODULE += core_mutex_debug` to your `Makefile` results in
on log messages such as
[mutex] waiting for thread 1 (pc = 0x800024d)
being added whenever `mutex_lock()` blocks. This makes tracing down
deadlocks easier.
### Testing procedure
Run e.g.
```sh
USEMODULE=core_mutex_debug BOARD=nucleo-f767zi make -C tests/mutex_cancel flash test
```
which should provide output such as
```
Welcome to pyterm!
Type '/exit' to exit.
READY
s
[mutex] waiting for thread 1 (pc = 0x8000f35)
START
main(): This is RIOT! (Version: 2022.10-devel-841-g5cc02-core/mutex/debug)
Test Application for mutex_cancel / mutex_lock_cancelable
=========================================================
Test without cancellation: OK
Test early cancellation: OK
Verify no side effects on subsequent calls: [mutex] waiting for thread 1 (pc = 0x800024d)
OK
Test late cancellation: [mutex] waiting for thread 1 (pc = 0x0)
OK
TEST PASSED
```
```sh
$ arm-none-eabi-addr2line -a 0x800024d -e tests/mutex_cancel/bin/nucleo-f767zi/tests_mutex_cancel.elf
0x0800024d
/home/maribu/Repos/software/RIOT/tests/mutex_cancel/main.c:51
```
### Issues/PRs references
Depends on and includes https://github.com/RIOT-OS/RIOT/pull/18619
19296: nanocoap: allow to define CoAP resources as XFA r=maribu a=benpicco
19504: cpu/cc26xx_cc13xx: Fix bogus array-bound warning r=maribu a=maribu
### Contribution description
GCC 12 create a bogus array out of bounds warning as it assumes that because there is special handling for `uart == 0` and `uart == 1`, `uart` can indeed be `1`. There is an `assert(uart < UART_NUMOF)` above that would blow up prior to any out of bounds access.
In any case, optimizing out the special handling of `uart == 1` for when `UART_NUMOF == 1` likely improves the generated code and fixes the warning.
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:88:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
88 | ctx[uart].rx_cb = rx_cb;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:89:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
89 | ctx[uart].arg = arg;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
### Testing procedure
The actual change is a pretty obvious one-liner, so that code review and a green CI should be sufficient. If not, running any UART example app without regression should do.
### Issues/PRs references
None
19506: tools/openocd: Fix handling of OPENOCD_CMD_RESET_HALT r=maribu a=maribu
### Contribution description
The OPENOCD_CMD_RESET_HALT was not longer correctly passed to the script. This fixes the issue.
### Testing procedure
Flashing of e.g. the `cc2650-launchpad` with upstream OpenOCD should work again.
### Issues/PRs references
The change was added to https://github.com/RIOT-OS/RIOT/pull/19050 after testing the PR and before merging. I'm not sure if the fix never worked because of this, or if behavior of `target-export-variables` or GNU Make changed.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19383: cord: include gcoap_req_send returning 0 in error r=benpicco a=bergzand
### Contribution description
gcoap_req_send returns 0 if it was unable to send the CoAP request. CoRD did not include that case in the return code checks. This changes CoRD to include it and drop the registration if CoAP could not send the request. The old behaviour made the CoRD thread lock up.
### Testing procedure
- Check with the gcoap API docs.
- I can reliable trigger the issue with a RIOT application including both the `cord_ep_standalone` module and some measurement reported both sending requests to the same application. If at some point the application is shut down, gcoap has all its memo's occupied with the measurement reporting and can't add the CoRD update request. Thus the CoRD update request fails with a zero code and the thread (previously) would lock up.
### Issues/PRs references
None
19385: cpu/stm32/periph/timer: fix clobered IRQ flag r=benpicco a=Enoch247
### Contribution description
From the git commit:
> The STM32 periph_timer driver reads the timer's status flags, then clears them all. It is possible that a timer interrupt could occur between reading the flag and clearing it. This would lead to a lost interrupt.
>
> The timer's status flags can be cleared by software, but can only be set by the hardware. This patch takes advantage of this by only clearing the flags it knows are set. The rest of the flags are set, which doesn't actually change their state.
I had trouble finding anything in ST's datasheet saying that software could not set the timer's status flags, but testing showed that this is how it works in practice. Further, [ST's own HAL ](https://github.com/STMicroelectronics/STM32CubeF4/blob/master/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h#L1258)confirms this. If the hardware didn't work this way, it would be impossible to atomically read-modify-write the flags.
### Testing procedure
I tested by doing the following:
1. `make -C tests/periph_timer BOARD=nucleo-f767zi all flash term`
2. press s
3. press [ENTER]
4. observe test passes
5. `make -C tests/periph_timer_periodic BOARD=nucleo-f767zi all flash term`
6. press s
7. press [ENTER]
8. observe test passes
9. `make -C tests/periph_timer_short_relative_set BOARD=nucleo-f767zi all flash term`
10. press s
11. press [ENTER]
12. observe test passes
### Issues/PRs references
- none known
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
gcoap_req_send returns 0 if it was unable to send the CoAP request. CoRD
did not include that case in the return code checks. This changes CoRD
to include it and drop the registration if CoAP could not send the
request. The old behaviour made the CoRD thread lock up.
19365: bootloaders: fix bootloader button logic r=benpicco a=dylad
### Contribution description
In lastest master, the `BTN_BOOTLOADER_INVERTED` logic doesn't work as expected.
This PR fixes the underlying logic by replacing the `BTN_BOOTLOADER_INVERTED` macro definition by a runtime function.
In fact the current code:
```
#ifndef BTN_BOOTLOADER_INVERTED
#if (BTN0_MODE == GPIO_IN_PD)
#define BTN_BOOTLOADER_INVERTED false
#else
#define BTN_BOOTLOADER_INVERTED true
#endif
#endif
```
cannot work because both `BTN0_MODE` and `GPIO_IN_PD` are not known by the precompiler as they are enum values defined at cpu level.
Thus, replaces it by a runtime function in our bootloader applications.
I've also add `GPIO_OD_PU` along side `GPIO_IN_PU` and add a new define (which can be override at board level or app level) in case an external pullup is used.
### Testing procedure
Flash the riotboot_dfu bootloader:
`make BOARD=saml21-xpro -C bootloaders/riotboot_dfu flash`
Then, flash any test app:
`PROGRAMMER=dfu-util USEMODULE=usbus_dfu make BOARD=saml21-xpro -C tests/shell riotboot/flash-slot0`
With master, the application will not start.
With this PR, the application will start after flashing.
### Issues/PRs references
Fixes#19364
19366: nanocoap_sock: don't include token in empty ACK response r=benpicco a=benpicco
19367: cord: bump reference from draft to rfc r=benpicco a=bergzand
### Contribution description
The draft is an RFC, this bumps the "see also" in the docs to the rfc.
### Testing procedure
Check that the correct RFC is linked in the docs.
### Issues/PRs references
None
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
