Merge pull request #14491 from aabadie/pr/remove_wsn430_iotlab

boards: remove support for wsn430-1_3b and wsn430-1_4

Makefile.include

@@ -347,10 +347,8 @@ export PREFIX ?= $(if $(TARGET_ARCH),$(TARGET_ARCH)-)
 # be done in makefile.iotlab.single.inc.mk which is included after.
 ifneq (,$(IOTLAB_NODE))
   PROGRAMMER ?= iotlab
-  # iotlab uses ELFFILE by default for flashing boards, except for WSN430.
+  # iotlab uses ELFFILE by default for flashing boards.
-  ifeq (,$(filter wsn430-%,$(BOARD)))
+  FLASHFILE ?= $(ELFFILE)
-    FLASHFILE ?= $(ELFFILE)
-  endif
 endif
 
 # Add standard include directories
@@ -893,7 +891,7 @@ endif
 help:
 	@$(MAKE) -qp | sed -ne 's/\(^[a-z][a-z_-]*\):.*/\1/p' | sort | uniq
 
-ifneq (,$(filter iotlab-m3 wsn430-v1_3b wsn430-v1_4,$(BOARD)))
+ifeq (iotlab-m3,$(BOARD))
   ifneq (,$(filter iotlab-%,$(MAKECMDGOALS)))
     include $(RIOTBASE)/dist/testbed-support/Makefile.iotlab
   endif

boards/common/wsn430/Kconfig

@@ -1,18 +0,0 @@
-# Copyright (c) 2020 HAW Hamburg
-#
-# This file is subject to the terms and conditions of the GNU Lesser
-# General Public License v2.1. See the file LICENSE in the top level
-# directory for more details.
-
-config BOARD
-    default "wsn430" if BOARD_WSN430
-
-config BOARD_COMMON_WSN430
-    bool
-    default y
-    select CPU_MODEL_MSP430F1611
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART

boards/common/wsn430/Makefile

@@ -1,3 +0,0 @@
-MODULE = boards_common_wsn430
-
-include $(RIOTBASE)/Makefile.base

boards/common/wsn430/Makefile.dep

@@ -1,2 +0,0 @@
-# include this module in the build
-USEMODULE += boards_common_wsn430

boards/common/wsn430/Makefile.features

@@ -1,8 +0,0 @@
-CPU = msp430fxyz
-CPU_MODEL = msp430f1611
-
-# Put defined MCU peripherals here (in alphabetical order)
-FEATURES_PROVIDED += periph_gpio periph_gpio_irq
-FEATURES_PROVIDED += periph_timer
-FEATURES_PROVIDED += periph_spi
-FEATURES_PROVIDED += periph_uart

boards/common/wsn430/Makefile.include

@@ -1,12 +0,0 @@
-# use common wsn430 includes
-INCLUDES += -I$(RIOTBOARD)/common/wsn430/include
-
-# configure the serial interface
-PORT_LINUX ?= /dev/ttyUSB0
-PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.SLAB_USBtoUART*)))
-include $(RIOTMAKE)/tools/serial.inc.mk
-
-# configure the flash tool
-FLASHER = mspdebug
-FLASHFILE ?= $(HEXFILE)
-FFLAGS = -d $(PROG_DEV) -j uif "prog $(FLASHFILE)"

boards/common/wsn430/board_init.c

@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2013 Milan Babel <babel@inf.fu-berlin.de>
- *               2017 Freie Universität Berlin
- *
- * This file is subject to the terms and conditions of the GNU Lesser
- * General Public License v2.1. See the file LICENSE in the top level
- * directory for more details.
- */
-
- /**
-  * @ingroup     boards_common_wsn430
-  * @{
-  *
-  * @file
-  * @brief       Board initialization for WSN430
-  *
-  * @author      Milan Babel <babel@inf.fu-berlin.de>
-  * @author      Hauke Petersen <hauke.petersen@fu-berlin.de>
-  *
-  * @}
-  */
-
-#include "cpu.h"
-#include "irq.h"
-#include "assert.h"
-#include "stdio_uart.h"
-#include "periph_conf.h"
-
-enum {
-    MCLK_2MHZ_SCLK_1MHZ = (SELM_2 | DIVM_2 | SELS | DIVS_3),
-    MCLK_4MHZ_SCLK_1MHZ = (SELM_2 | DIVM_1 | SELS | DIVS_3),
-    MCLK_8MHZ_SCLK_1MHZ = (SELM_2 | SELS | DIVS_3),
-    MCLK_8MHZ_SCLK_8MHZ = (SELM_2 | SELS),
-};
-
-static void msb_ports_init(void)
-{
-    /* Port 1: GDO, Flash, BSL TX */
-    P1SEL = 0x02;    /* Port1 Select: 00000010 = 0x02 */
-    P1OUT = 0x00;    /* Port1 Output: 00000000 = 0x00 */
-    P1DIR = 0x87;    /* Port1 Direction: 10000111 = 0x87 */
-
-    /* Port 2: GPIO, BSL RX, 1wire */
-    P2SEL = 0x04;    /* Port2 Select: 00000100 = 0x04 */
-    P2OUT = 0x00;    /* Port2 Output: 00000000 = 0x00 */
-    P2DIR = 0xFF;    /* Port2 Direction: 11111111 = 0xFF */
-
-
-    /* Port 3: UART */
-    P3SEL = 0xFE;    /* Port3 Select: 11111110 = 0xFE */
-    P3OUT = 0x00;    /* Port3 Output: 00000000 = 0x00 */
-    P3DIR = 0xFF;    /* Port3 Direction: 11111111 = 0xFF */
-
-
-    /* Port 4: CS */
-    P4SEL = 0x00;    /* Port4 Select: 00000000 = 0x00 */
-    P4OUT = 0x14;    /* Port4 Output: 00010100 = 0x14 */
-    P4DIR = 0xFF;    /* Port4 Direction: 11111111 = 0xFF */
-
-    /* Port 5: SPI, LED */
-    P5SEL = 0x0E;    /* Port5 Select: 00001110 = 0x0E */
-    P5OUT = 0x70;    /* Port5 Output: 01110000 = 0x70 */
-    P5DIR = 0x70;    /* Port5 Direction: 01110000 = 0x70 */
-
-
-    P6SEL = 0xFF;    /* Port6 Select: 11111111 = 0xFF */
-    P6OUT = 0x00;    /* Port6 Output: 00000000 = 0x00 */
-    P6DIR = 0xFF;    /* Port6 Direction: 11111000 = 0xF8 */
-
-}
-
-static void msp430_init_cpuclk(uint8_t speed)
-{
-    /* stop watchdog */
-    WDTCTL = WDTPW + WDTHOLD;
-    BCSCTL1 = RSEL2;
-
-    /* wait for XTAL to stabilize */
-    do {
-        /* clear oscillator fault flag */
-        IFG1 &= ~OFIFG;
-        /* time for flag to set */
-        for (uint16_t i = 0xFF; i > 0; i--) {}
-    } while ((IFG1 & OFIFG) != 0);
-
-    /* apply clock config */
-    BCSCTL2 = speed;
-}
-
-void board_init(void)
-{
-    msp430_cpu_init();
-    msb_ports_init();
-
-    /* initialize CPU clock */
-    unsigned state = irq_disable();
-    msp430_init_cpuclk(CLOCK_MODE);
-    irq_restore(state);
-
-    /* initialize STDIO over UART */
-    stdio_init();
-}

boards/common/wsn430/include/board_common.h

@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2013 Milan Babel <babel@inf.fu-berlin.de>
- *               2015-2017 Freie Universität Berlin
- *
- * This file is subject to the terms and conditions of the GNU Lesser
- * General Public License v2.1. See the file LICENSE in the top level
- * directory for more details.
- */
-
-/**
- * @defgroup    boards_common_wsn430 Shared WSN430 files
- * @ingroup     boards_common
- * @brief       Common files for WSN430 based boards
- * @{
- *
- * @file
- * @brief       Common definitions for WSN430 based boards
- *
- * @author      Milan Babel <babel@inf.fu-berlin.de>
- * @author      Hauke Petersen <hauke.petersen@fu-berlin.de>
- *
- */
-
-#ifndef BOARD_COMMON_H
-#define BOARD_COMMON_H
-
-#include "cpu.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @brief    Address of the info memory
- */
-#define INFOMEM     (0x1000)
-
-/**
- * @name    Xtimer configuration
- * @{
- */
-#define XTIMER_WIDTH                (16)
-#define XTIMER_BACKOFF              (40)
-/** @} */
-
-/**
- * @name    LED pin definitions and handlers
- * @{
- */
-#define LED0_PIN                    GPIO_PIN(4, 4)
-#define LED1_PIN                    GPIO_PIN(4, 5)
-#define LED2_PIN                    GPIO_PIN(4, 6)
-
-#define LED_DIR_REG                 P5DIR
-#define LED0_MASK                   (1 << 4)
-#define LED1_MASK                   (1 << 5)
-#define LED2_MASK                   (1 << 6)
-
-#define LED0_ON                     (LED_DIR_REG &=~LED0_MASK)
-#define LED0_OFF                    (LED_DIR_REG |= LED0_MASK)
-#define LED0_TOGGLE                 (LED_DIR_REG ^= LED0_MASK)
-
-#define LED1_ON                     (LED_DIR_REG &=~LED1_MASK)
-#define LED1_OFF                    (LED_DIR_REG |= LED1_MASK)
-#define LED1_TOGGLE                 (LED_DIR_REG ^= LED1_MASK)
-
-#define LED2_ON                     (LED_DIR_REG &=~LED2_MASK)
-#define LED2_OFF                    (LED_DIR_REG |= LED2_MASK)
-#define LED2_TOGGLE                 (LED_DIR_REG ^= LED2_MASK)
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* BOARD_COMMON_H */
-/** @} */

boards/common/wsn430/include/periph_conf.h

@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2014 INRIA
- *               2015,2017 Freie Universität Berlin
- *
- * This file is subject to the terms and conditions of the GNU Lesser General
- * Public License v2.1. See the file LICENSE in the top level directory for more
- * details.
- */
-
-/**
- * @ingroup     boards_common_wsn430
- * @{
- *
- * @file
- * @brief       WSN430 peripheral configuration
- *
- * @author      Oliver Hahm <oliver.hahm@inria.fr>
- * @author      Hauke Petersen <hauke.petersen@fu-berlin.de>
- */
-
-#ifndef PERIPH_CONF_H
-#define PERIPH_CONF_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @name    Clock configuration
- * @{
- */
-#define CLOCK_CORECLOCK     (8000000UL)
-#define CLOCK_MODE          (MCLK_8MHZ_SCLK_8MHZ)
-#define CLOCK_CMCLK         (CLOCK_CORECLOCK)       /* no divider programmed */
-/** @} */
-
-/**
- * @name    Timer configuration
- * @{
- */
-#define TIMER_NUMOF         (1U)
-#define TIMER_BASE          (TIMER_A)
-#define TIMER_CHAN          (3)
-#define TIMER_ISR_CC0       (TIMERA0_VECTOR)
-#define TIMER_ISR_CCX       (TIMERA1_VECTOR)
-/** @} */
-
-/**
- * @name    UART configuration
- * @{
- */
-#define UART_NUMOF          (1U)
-#define UART_0_EN           (1U)
-
-#define UART_BASE           (USART_0)
-#define UART_IE             (SFR->IE1)
-#define UART_IF             (SFR->IFG1)
-#define UART_IE_RX_BIT      (1 << 6)
-#define UART_IE_TX_BIT      (1 << 7)
-#define UART_ME             (SFR->ME1)
-#define UART_ME_BITS        (0xc0)
-#define UART_PORT           (PORT_3)
-#define UART_RX_PIN         (1 << 4)
-#define UART_TX_PIN         (1 << 5)
-#define UART_RX_ISR         (USART0RX_VECTOR)
-#define UART_TX_ISR         (USART0TX_VECTOR)
-/** @} */
-
-/**
- * @name    SPI configuration
- * @{
- */
-#define SPI_NUMOF           (1U)
-
-/* SPI configuration */
-#define SPI_BASE            (USART_0)
-#define SPI_IE              (SFR->IE1)
-#define SPI_IF              (SFR->IFG1)
-#define SPI_IE_RX_BIT       (1 << 6)
-#define SPI_IE_TX_BIT       (1 << 7)
-#define SPI_ME              (SFR->ME1)
-#define SPI_ME_BIT          (1 << 6)
-#define SPI_PIN_MISO        GPIO_PIN(P5,2)
-#define SPI_PIN_MOSI        GPIO_PIN(P5,1)
-#define SPI_PIN_CLK         GPIO_PIN(P5,3)
-/** @} */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* PERIPH_CONF_H */
-/** @} */

boards/wsn430-v1_3b/Kconfig

@@ -1,15 +0,0 @@
-# Copyright (c) 2020 HAW Hamburg
-#
-# This file is subject to the terms and conditions of the GNU Lesser
-# General Public License v2.1. See the file LICENSE in the top level
-# directory for more details.
-
-config BOARD
-    default "wsn430-v1_3b" if BOARD_WSN430_V1_3B
-
-config BOARD_WSN430_V1_3B
-    bool
-    default y
-    select BOARD_COMMON_WSN430
-
-source "$(RIOTBOARD)/common/wsn430/Kconfig"

boards/wsn430-v1_3b/Makefile

@@ -1,4 +0,0 @@
-MODULE = board
-DIRS = $(RIOTBOARD)/common/wsn430
-
-include $(RIOTBASE)/Makefile.base

boards/wsn430-v1_3b/Makefile.dep

@@ -1 +0,0 @@
-include $(RIOTBOARD)/common/wsn430/Makefile.dep

boards/wsn430-v1_3b/Makefile.features

@@ -1 +0,0 @@
-include $(RIOTBOARD)/common/wsn430/Makefile.features

boards/wsn430-v1_3b/Makefile.include

@@ -1 +0,0 @@
-include $(RIOTBOARD)/common/wsn430/Makefile.include

boards/wsn430-v1_3b/doc.txt

@@ -1,5 +0,0 @@
-/**
-@defgroup    boards_wsn430-v1_3b WSN430 v1.3b
-@ingroup     boards
-@brief       Support for the Senslab WSN430 V1 Rev 3b
- */

boards/wsn430-v1_3b/include/board.h

@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2018 Freie Universität Berlin
- *
- * This file is subject to the terms and conditions of the GNU Lesser
- * General Public License v2.1. See the file LICENSE in the top level
- * directory for more details.
- */
-
-/**
- * @ingroup     boards_wsn430-v1_3b
- * @brief       Support for the Senslab WSN430 v1.3b board
- *
- * @{
- *
- * @file
- * @brief       Board specific definitions for the Senslab WSN430 v1.3b board
- *
- * @author      Martine Lenders <m.lenders@fu-berlin.de>
- */
-#ifndef BOARD_H
-#define BOARD_H
-
-#include "board_common.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @name    Define the interface to the CC1101 radio
- * @{
- */
-#define CC110X_PARAM_CS             (GPIO_PIN(P4, 2))
-#define CC110X_PARAM_GDO0           (GPIO_PIN(P1, 3))
-#define CC110X_PARAM_GDO1           (GPIO_PIN(P5, 2))
-#define CC110X_PARAM_GDO2           (GPIO_PIN(P1, 4))
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* BOARD_H */
-/** @} */

boards/wsn430-v1_4/Kconfig

@@ -1,15 +0,0 @@
-# Copyright (c) 2020 HAW Hamburg
-#
-# This file is subject to the terms and conditions of the GNU Lesser
-# General Public License v2.1. See the file LICENSE in the top level
-# directory for more details.
-
-config BOARD
-    default "wsn430-v1_4" if BOARD_WSN430_V1_4
-
-config BOARD_WSN430_V1_4
-    bool
-    default y
-    select BOARD_COMMON_WSN430
-
-source "$(RIOTBOARD)/common/wsn430/Kconfig"

boards/wsn430-v1_4/Makefile

@@ -1,4 +0,0 @@
-MODULE = board
-DIRS = $(RIOTBOARD)/common/wsn430
-
-include $(RIOTBASE)/Makefile.base

boards/wsn430-v1_4/Makefile.dep

@@ -1 +0,0 @@
-include $(RIOTBOARD)/common/wsn430/Makefile.dep

boards/wsn430-v1_4/Makefile.features

@@ -1 +0,0 @@
-include $(RIOTBOARD)/common/wsn430/Makefile.features

boards/wsn430-v1_4/Makefile.include

@@ -1 +0,0 @@
-include $(RIOTBOARD)/common/wsn430/Makefile.include

boards/wsn430-v1_4/doc.txt

@@ -1,5 +0,0 @@
-/**
-@defgroup    boards_wsn430-v1_4 WSN430 v1.4
-@ingroup     boards
-@brief       Support for the Senslab WSN430 V1 Rev 4
- */

boards/wsn430-v1_4/include/board.h

@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2018 Freie Universität Berlin
- *
- * This file is subject to the terms and conditions of the GNU Lesser
- * General Public License v2.1. See the file LICENSE in the top level
- * directory for more details.
- */
-
-/**
- * @ingroup     boards_wsn430-v1_4
- * @brief       Support for the Senslab WSN430 v1.4 board
- *
- * @{
- *
- * @file
- * @brief       Board specific definitions for the Senslab WSN430 v1.4 board
- *
- * @author      Martine Lenders <m.lenders@fu-berlin.de>
- */
-#ifndef BOARD_H
-#define BOARD_H
-
-#include "board_common.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @name    Define the interface to the CC2420 radio
- * @{
- */
-#define CC2420_PARAMS_PIN_CS            (GPIO_PIN(P4, 2))
-#define CC2420_PARAMS_PIN_FIFO          (GPIO_PIN(P1, 3))
-#define CC2420_PARAMS_PIN_FIFOP         (GPIO_PIN(P1, 4))
-#define CC2420_PARAMS_PIN_CCA           (GPIO_PIN(P1, 6))
-#define CC2420_PARAMS_PIN_SFD           (GPIO_PIN(P1, 5))
-#define CC2420_PARAMS_PIN_VREFEN        (GPIO_PIN(P3, 0))
-#define CC2420_PARAMS_PIN_RESET         (GPIO_PIN(P1, 7))
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* BOARD_H */
-/** @} */

dist/testbed-support/makefile.iotlab.single.inc.mk

@@ -6,7 +6,7 @@
 #  * reset
 #  * term
 #
-# Tested on m3/a8-m3/wsn430/samr21/arduino-zero nodes
+# Tested on m3/a8-m3/samr21/arduino-zero nodes
 #
 # It can be run:
 # * From your computer by setting IOTLAB_NODE to the full url like
@@ -78,8 +78,6 @@ IOTLAB_ARCHI_nrf52840-mdk   = nrf52840mdk:multi
 IOTLAB_ARCHI_pba-d-01-kw2x  = phynode:kw2xrf
 IOTLAB_ARCHI_samr21-xpro    = samr21:at86rf233
 IOTLAB_ARCHI_samr30-xpro    = samr30:at86rf212b
-IOTLAB_ARCHI_wsn430-v1_3b   = wsn430:cc1101
-IOTLAB_ARCHI_wsn430-v1_4    = wsn430:cc2420
 IOTLAB_ARCHI := $(IOTLAB_ARCHI_$(BOARD))
 
 # There are several deprecated and incompatible features used here that were
@@ -94,8 +92,8 @@ else
   _NODES_DEPLOYED = $(shell iotlab-experiment --jmespath='"0"' --format='" ".join' get $(_IOTLAB_EXP_ID) --deployment)
   _NODES_LIST_OPTION = --nodes
   _NODES_FLASH_OPTION = --flash
-  ifneq (,$(filter-out wsn430-% firefly,$(BOARD)))
+  ifneq (firefly,$(BOARD))
-    # All boards in IoT-LAB except firefly and WSN430 can be flashed using $(BINFILE).
+    # All boards in IoT-LAB except firefly can be flashed using $(BINFILE).
     # On IoT-LAB, firefly only accepts $(ELFFILE) and WSN320 boards on accept $(HEXFILE).
     # Using $(BINFILE) speeds up the firmware upload since the file is much
     # smaller than an elffile.
@@ -177,7 +175,7 @@ _STDIN_EQ_0 = grep 0
 
 ifneq (iotlab-a8-m3,$(BOARD))
 
-  # M3 and wsn430 nodes
+  # M3 nodes
   FLASHER     = iotlab-node
   RESET       = iotlab-node
   _NODE_FMT   = --jmespath='keys(@)[0]' --format='int'

examples/asymcute_mqttsn/Makefile.ci

@@ -37,8 +37,6 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     yunjia-nrf51822 \
     z1 \
     #

examples/cord_ep/Makefile.ci

@@ -28,7 +28,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

examples/cord_epsim/Makefile.ci

@@ -25,7 +25,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

examples/cord_lc/Makefile.ci

@@ -28,7 +28,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

examples/emcute_mqttsn/Makefile.ci

@@ -31,7 +31,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

examples/gcoap/Makefile.ci

@@ -25,7 +25,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

examples/gnrc_border_router/Makefile.ci

@@ -53,8 +53,6 @@ BOARD_INSUFFICIENT_MEMORY := \
     telosb \
     waspmote-pro \
     weio \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     yunjia-nrf51822 \
     z1 \
     #

examples/gnrc_lorawan/Makefile.ci

@@ -14,7 +14,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     msb-430h \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
 #

examples/gnrc_networking/Makefile.ci

@@ -39,7 +39,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

examples/nanocoap_server/Makefile.ci

@@ -22,7 +22,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

examples/ndn-ping/Makefile.ci

@@ -24,7 +24,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     telosb \
     waspmote-pro \
     weio \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

examples/posix_select/Makefile.ci

@@ -21,7 +21,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

examples/posix_sockets/Makefile.ci

@@ -32,8 +32,6 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     yunjia-nrf51822 \
     z1 \
     #

examples/suit_update/Makefile.ci

@@ -24,7 +24,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32f0discovery \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/bench_xtimer/Makefile

@@ -62,8 +62,6 @@ LOW_MEMORY_BOARDS += \
   telosb \
   waspmote-pro \
   wemos-zero \
-  wsn430-v1_3b \
-  wsn430-v1_4 \
   yunjia-nrf51822 \
   z1 \
   #

tests/bloom_bytes/Makefile.ci

@@ -9,7 +9,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     msb-430h \
     stm32f030f4-demo \
     telosb \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/conn_can/Makefile.ci

@@ -35,8 +35,6 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     yunjia-nrf51822 \
     z1 \
     #

tests/driver_bme680/Makefile.ci

@@ -6,6 +6,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     msb-430h \
     nucleo-f031k6 \
     telosb \
-    wsn430-v1_3b \
+    z1 \
-    wsn430-v1_4 z1 \
     #

tests/driver_cc110x/Makefile

@@ -4,7 +4,7 @@ include ../Makefile.tests_common
 DEVICE ?= cc1100 # The MSB-A2 uses the CC1100. New boards use CC1101
 
 # stdlib.h for msp430 does not provide EXIT_FAILURE and EXIT_SUCCESS
-BOARD_BLACKLIST += msb-430 msb-430h telosb wsn430-v1_3b wsn430-v1_4 z1
+BOARD_BLACKLIST += msb-430 msb-430h telosb z1
 
 # This test will rely on a human interacting with the shell, so we better add
 # the shell and some commands

tests/driver_enc28j60/Makefile.ci

@@ -23,7 +23,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/driver_encx24j600/Makefile.ci

@@ -17,7 +17,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/driver_ltc4150/Makefile

@@ -7,6 +7,6 @@ USEMODULE += ltc4150
 
 include $(RIOTBASE)/Makefile.include
 
-ifneq (,$(filter $(BOARD),msb-430 msb-430h telosb wsn430-v1_3b wsn430-v1_4 z1))
+ifneq (,$(filter $(BOARD),msb-430 msb-430h telosb z1))
   CFLAGS += -DNO_FPUTS
 endif

tests/driver_pulse_counter/Makefile

@@ -1,6 +1,6 @@
 include ../Makefile.tests_common
 
-BOARD_BLACKLIST := msb-430 msb-430h telosb wsn430-v1_3b wsn430-v1_4 z1
+BOARD_BLACKLIST := msb-430 msb-430h telosb z1
 
 USEMODULE += pulse_counter
 

tests/emb6/Makefile.ci

@@ -17,7 +17,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/emcute/Makefile.ci

@@ -50,8 +50,6 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     yunjia-nrf51822 \
     z1 \
     #

tests/float/tests/01-run.py

@@ -9,7 +9,7 @@
 import sys
 from testrunner import run
 
-# It takes 35 seconds on wsn430, so add some margin
+# It takes 35 seconds on msp430, so add some margin
 TIMEOUT = 45
 
 

tests/gnrc_dhcpv6_client/Makefile.ci

@@ -31,7 +31,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_dhcpv6_client_6lbr/Makefile.ci

@@ -51,8 +51,6 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     yunjia-nrf51822 \
     z1 \
     #

tests/gnrc_ipv6_ext/Makefile.ci

@@ -32,7 +32,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     telosb \
     thingy52 \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_ipv6_ext_frag/Makefile.ci

@@ -34,7 +34,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_ipv6_ext_opt/Makefile.ci

@@ -24,7 +24,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_ipv6_fwd_w_sub/Makefile.ci

@@ -19,7 +19,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_ipv6_nib/Makefile.ci

@@ -14,7 +14,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32f030f4-demo \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_ipv6_nib_6ln/Makefile.ci

@@ -19,7 +19,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_ipv6_nib_dns/Makefile.ci

@@ -23,6 +23,4 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     #

tests/gnrc_ndp/Makefile.ci

@@ -19,7 +19,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_netif/Makefile.ci

@@ -53,8 +53,6 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     yunjia-nrf51822 \
     z1 \
     #

tests/gnrc_rpl_p2p/Makefile.ci

@@ -25,7 +25,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_rpl_srh/Makefile.ci

@@ -32,7 +32,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     telosb \
     thingy52 \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_sixlowpan/Makefile.ci

@@ -28,7 +28,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_sixlowpan_iphc_w_vrb/Makefile.ci

@@ -19,6 +19,4 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     #

tests/gnrc_sock_dns/Makefile.ci

@@ -27,7 +27,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     telosb \
     thingy52 \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_tcp/Makefile.ci

@@ -31,7 +31,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/gnrc_udp/Makefile.ci

@@ -42,8 +42,6 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     yunjia-nrf51822 \
     z1 \
     #

tests/kconfig_features/Makefile

@@ -61,8 +61,6 @@ BOARD_WHITELIST += arduino-duemilanove \
                    telosb \
                    usb-kw41z \
                    waspmote-pro \
-                   wsn430-v1_3b \
-                   wsn430-v1_4 \
                    z1
                    #
 

tests/periph_pm/Makefile

@@ -2,7 +2,7 @@ BOARD ?= slstk3401a
 include ../Makefile.tests_common
 
 # method `fflush()` is not defined for MSP-430 (#6445 will fix this)
-BOARD_BLACKLIST := chronos msb-430h msb-430 telosb wsn430-v1_3b wsn430-v1_4 z1
+BOARD_BLACKLIST := chronos msb-430h msb-430 telosb z1
 
 FEATURES_OPTIONAL += periph_rtc
 FEATURES_OPTIONAL += periph_gpio_irq

tests/pkg_fatfs/Makefile

@@ -23,7 +23,7 @@ BOARD_WHITELIST := airfy-beacon arduino-due arduino-duemilanove \
                    sensebox_samd21 sltb001a sodaq-autonomo \
                    sodaq-explorer spark-core stm32f0discovery stm32f3discovery \
                    stm32f4discovery stm32l0538-disco telosb udoo waspmote-pro \
-                   wsn430-v1_3b wsn430-v1_4 yunjia-nrf51822 z1 native
+                   yunjia-nrf51822 z1 native
 
 USEMODULE += shell
 USEMODULE += fatfs_diskio_mtd

tests/pkg_fatfs_vfs/Makefile.ci

@@ -10,7 +10,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     nucleo-f042k6 \
     stm32f030f4-demo \
     telosb \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/pkg_libb2/Makefile.ci

@@ -19,7 +19,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32f030f4-demo \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/pkg_libcoap/Makefile.ci

@@ -15,7 +15,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32f0discovery \
     stm32l0538-disco \
     telosb \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/pkg_littlefs/Makefile

@@ -4,8 +4,6 @@ BOARD_BLACKLIST := chronos \
                    msb-430 \
                    msb-430h \
                    telosb \
-                   wsn430-v1_3b \
-                   wsn430-v1_4 \
                    z1 \
 
 USEMODULE += littlefs

tests/pkg_minmea/Makefile

@@ -5,6 +5,6 @@ USEPKG += minmea
 USEMODULE += fmt
 
 # The MSP-430 toolchain lacks mktime and NAN
-BOARD_BLACKLIST := chronos msb-430 msb-430h telosb wsn430-v1_3b wsn430-v1_4 z1
+BOARD_BLACKLIST := chronos msb-430 msb-430h telosb z1
 
 include $(RIOTBASE)/Makefile.include

tests/pkg_relic/Makefile

@@ -24,8 +24,6 @@ BOARD_BLACKLIST :=  arduino-duemilanove \
                     stm32f3discovery \
                     telosb \
                     waspmote-pro \
-                    wsn430-v1_3b \
-                    wsn430-v1_4 \
                     z1 \
                     #
 

tests/pkg_spiffs/Makefile.ci

@@ -17,7 +17,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32f0discovery \
     stm32l0538-disco \
     telosb \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/pkg_tiny-asn1/Makefile

@@ -1,7 +1,5 @@
 include ../Makefile.tests_common
 
-BOARD_BLACKLIST := wsn430-v1_3b wsn430-v1_4
-
 USEPKG += tiny-asn1
 
 include $(RIOTBASE)/Makefile.include

tests/pkg_u8g2/Makefile.ci

@@ -10,7 +10,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     nucleo-f031k6 \
     stm32f030f4-demo \
     telosb \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/ps_schedstatistics/Makefile.ci

@@ -17,7 +17,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32f0discovery \
     stm32l0538-disco \
     telosb \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/riotboot_flashwrite/Makefile.ci

@@ -21,7 +21,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32f0discovery \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/sntp/Makefile.ci

@@ -23,7 +23,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/struct_tm_utility/Makefile

@@ -4,6 +4,6 @@ USEMODULE += shell
 USEMODULE += timex
 
 # The MSP-430 toolchain lacks sscanf:
-BOARD_BLACKLIST := chronos msb-430 msb-430h telosb wsn430-v1_3b wsn430-v1_4 z1
+BOARD_BLACKLIST := chronos msb-430 msb-430h telosb z1
 
 include $(RIOTBASE)/Makefile.include

tests/suit_manifest/Makefile.ci

@@ -11,7 +11,5 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32l0538-disco \
     stm32f0discovery \
     telosb \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     z1 \
     #

tests/sys_crypto/Makefile.ci

@@ -12,6 +12,4 @@ BOARD_INSUFFICIENT_MEMORY := \
     stm32f030f4-demo \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     #

tests/unittests/Makefile.ci

@@ -94,8 +94,6 @@ BOARD_INSUFFICIENT_MEMORY := \
     teensy31 \
     telosb \
     waspmote-pro \
-    wsn430-v1_3b \
-    wsn430-v1_4 \
     yunjia-nrf51822 \
     z1 \
     #