diff --git a/boards/nucleo-f030r8/doc.txt b/boards/nucleo-f030r8/doc.txt index a8f5369d00..4050918b3e 100644 --- a/boards/nucleo-f030r8/doc.txt +++ b/boards/nucleo-f030r8/doc.txt @@ -5,34 +5,34 @@ ## Overview -The Nucleo-F030 is a board from ST's Nucleo family supporting a ARM Cortex-M0 +The Nucleo-F030R8 is a board from ST's Nucleo family supporting a ARM Cortex-M0 STM32F030R8 microcontroller with 8Kb of SRAM and 64Kb of ROM Flash. ## Hardware -![Nucleo64 F030](http://www.open-electronics.org/wp- +![Nucleo64 F030R8](http://www.open-electronics.org/wp- content/uploads/2015/08/Figura2-500x467.png) ### MCU | MCU | STM32F030R8 | -|:------------- |:--------------------- | -| Family | ARM Cortex-M0 | -| Vendor | ST Microelectronics | -| RAM | 8Kb | +|:---------- |:----------------- | +| Family | ARM Cortex-M0 | +| Vendor | ST Microelectronics | +| RAM | 8Kb | | Flash | 64Kb | -| Frequency | up to 48MHz) | +| Frequency | up to 48MHz | | FPU | no | -| Timers | 11 (2x watchdog, 1 SysTick, 8x 16-bit) | +| Timers | 10 (2x watchdog, 1 SysTick, 7x 16-bit) | | ADCs | 1x 12-bit | -| UARTs | 6 | +| UARTs | 2 | | SPIs | 2 | | I2Cs | 2 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | -| Datasheet | [Datasheet](http://www.st.com/en/evaluation-tools/nucleo-f030r8.html) | -| Reference Manual | [Reference Manual](http://www.st.com/resource/en/datasheet/stm32f030r8.pdf) | +| Vcc | 2.4V - 3.6V | +| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f030r8.pdf) | +| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00091010.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00051352.pdf) | | Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf)| @@ -53,22 +53,22 @@ content/uploads/2015/08/Figura2-500x467.png) ## Flashing the device -The ST Nucleo-F030 board includes an on-board ST-LINK V2 programmer. The +The ST Nucleo-F030R8 board includes an on-board ST-LINK V2 programmer. The easiest way to program the board is to use OpenOCD. Once you have installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing ``` -make BOARD=nucleo-f030 flash +make BOARD=nucleo-f030r8 flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo-f030 debug +make BOARD=nucleo-f030r8 debug ``` ## Supported Toolchains -For using the ST Nucleo-F030 board we strongly recommend the usage of the +For using the ST Nucleo-F030R8 board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain. */ diff --git a/boards/nucleo-f070rb/doc.txt b/boards/nucleo-f070rb/doc.txt index cbe511901c..cd9210755e 100644 --- a/boards/nucleo-f070rb/doc.txt +++ b/boards/nucleo-f070rb/doc.txt @@ -5,36 +5,37 @@ ## Overview -The Nucleo-F070 is a board from ST's Nucleo family supporting a ARM Cortex-M0 +The Nucleo-F070RB is a board from ST's Nucleo family supporting a ARM Cortex-M0 STM32F070RB microcontroller with 16Kb of SRAM and 128Kb of ROM Flash. ## Hardware -![Nucleo64 F070](http://www.open-electronics.org/wp- +![Nucleo64 F070RB](http://www.open-electronics.org/wp- content/uploads/2015/08/Figura2-500x467.png) ### MCU | MCU | STM32F070RB | -|:------------- |:--------------------- | -| Family | ARM Cortex-M0 | -| Vendor | ST Microelectronics | -| RAM | 16Kb | -| Flash | 128Kb | -| Frequency | up to 48MHz) | -| FPU | no | -| Timers | 11 (2x watchdog, 1 SysTick, 8x 16-bit) | -| ADCs | 1x 12-bit | -| UARTs | 4 | -| SPIs | 2 | -| I2Cs | 2 | -| RTC | 1 | -| Vcc | 2.0V - 3.6V | -| Datasheet | [Datasheet](http://www.st.com/en/evaluation-tools/nucleo-f070rb.html) | -| Reference Manual | [Reference Manual](http://www.st.com/resource/en/datasheet/stm32f070rb.pdf) | +|:---------- |:--------------------- | +| Family | ARM Cortex-M0 | +| Vendor | ST Microelectronics | +| RAM | 16Kb | +| Flash | 128Kb | +| Frequency | up to 48MHz | +| FPU | no | +| Timers | 11 (2x watchdog, 1 SysTick, 8x 16-bit) | +| ADCs | 1x 12-bit (16 channels) | +| UARTs | 4 | +| SPIs | 2 | +| I2Cs | 2 | +| RTC | 1 | +| USB | 1 | +| Vcc | 2.4V - 3.6V | +| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f070rb.pdf) | +| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00091010.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00051352.pdf) | -| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf)| +| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf) | @@ -53,22 +54,22 @@ content/uploads/2015/08/Figura2-500x467.png) ## Flashing the device -The ST Nucleo-F070 board includes an on-board ST-LINK V2 programmer. The +The ST Nucleo-F070RB board includes an on-board ST-LINK V2 programmer. The easiest way to program the board is to use OpenOCD. Once you have installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing ``` -make BOARD=nucleo-f070 flash +make BOARD=nucleo-f070rb flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo-f070 debug +make BOARD=nucleo-f070rb debug ``` ## Supported Toolchains -For using the ST Nucleo-F070 board we strongly recommend the usage of the +For using the ST Nucleo-F070RB board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain. */ diff --git a/boards/nucleo-f072rb/doc.txt b/boards/nucleo-f072rb/doc.txt index 3713256ecc..54280d017c 100644 --- a/boards/nucleo-f072rb/doc.txt +++ b/boards/nucleo-f072rb/doc.txt @@ -5,33 +5,35 @@ ## Overview -The Nucleo-F072 is a board from ST's Nucleo family supporting a ARM Cortex-M0 +The Nucleo-F072RB is a board from ST's Nucleo family supporting a ARM Cortex-M0 STM32F072RB microcontroller with 16Kb of SRAM and 128Kb of ROM Flash. ## Hardware -![Nucleo64 F072](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) +![Nucleo64 F072RB](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) ### MCU -| MCU | STM32F072RB | -|:------------- |:--------------------- | -| Family | ARM Cortex-M0 | -| Vendor | ST Microelectronics | -| RAM | 16Kb | +| MCU | STM32F072RB | +|:---------- |:----------------- | +| Family | ARM Cortex-M0 | +| Vendor | ST Microelectronics | +| RAM | 16Kb | | Flash | 128Kb | -| Frequency | up to 48MHz) | +| Frequency | up to 48MHz | | FPU | no | -| Timers | 12 (2x watchdog, 1 SysTick, 8x 16-bit, 1x 32-bit) | -| ADCs | 1x 12-bit (up to 16 channels) | +| Timers | 12 (2x watchdog, 1 SysTick, 8x 16-bit, 1x 32-bit) | +| ADCs | 1x 12-bit (up to 16 channels) | | UARTs | 4 | | SPIs | 2 | | I2Cs | 2 | +| CAN | 1 | +| USB | 1 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | -| Datasheet | [Datasheet](http://www.st.com/en/evaluation-tools/nucleo-f072rb.html) | -| Reference Manual | [Reference Manual](http://www.st.com/resource/en/datasheet/stm32f072rb.pdf) | -| Programming Manual | [Programming Manual](http://www.st.com/resource/en/reference_manual/dm00031936.pdf) | +| Vcc | 2.0V - 3.6V | +| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f072rb.pdf) | +| Reference Manual | [Reference Manual](http://www.st.com/resource/en/reference_manual/dm00031936.pdf) | +| Programming Manual | [Programming Manual](https://www.st.com/resource/en/programming_manual/dm00051352.pdf) | | Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf)| @@ -52,22 +54,22 @@ STM32F072RB microcontroller with 16Kb of SRAM and 128Kb of ROM Flash. ## Flashing the device -The ST Nucleo-F072 board includes an on-board ST-LINK V2 programmer. The +The ST Nucleo-F072RB board includes an on-board ST-LINK V2 programmer. The easiest way to program the board is to use OpenOCD. Once you have installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing ``` -make BOARD=nucleo-f072 flash +make BOARD=nucleo-f072rb flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo-f072 debug +make BOARD=nucleo-f072rb debug ``` ## Supported Toolchains -For using the ST Nucleo-F072 board we strongly recommend the usage of the +For using the ST Nucleo-F072RB board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain. */ diff --git a/boards/nucleo-f091rc/doc.txt b/boards/nucleo-f091rc/doc.txt index 2feac80c78..7c6afd9007 100644 --- a/boards/nucleo-f091rc/doc.txt +++ b/boards/nucleo-f091rc/doc.txt @@ -5,34 +5,35 @@ ## Overview -The Nucleo-F091 is a board from ST's Nucleo family supporting a ARM Cortex-M0 -STM32F091 microcontroller with 32Kb of RAM and 256Kb of ROM. +The Nucleo-F091RC is a board from ST's Nucleo family supporting a ARM Cortex-M0 +STM32F091RC microcontroller with 32Kb of RAM and 256Kb of ROM. ## Hardware -![STM32F3discovery image](http://media.digikey.com/Photos/STMicro%20Photos/MFG_NUCLEO.jpg) -![nucleo-f091 pinout](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo-f091_pinout.png) +![Nucleo64 F091RC](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) +![nucleo-f091rc pinout](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo-f091_pinout.png) ### MCU | MCU | STM32F091RC | -|:------------- |:--------------------- | -| Family | ARM Cortex-M0 | -| Vendor | ST Microelectronics | -| RAM | 32Kb | +|:---------- |:----------------- | +| Family | ARM Cortex-M0 | +| Vendor | ST Microelectronics | +| RAM | 32Kb | | Flash | 256Kb | -| Frequency | up to 48MHz (using the on-board 8MHz Oszillator of the ST-Link) | +| Frequency | up to 48MHz | | FPU | no | -| Timers | 9 (8x 16-bit, 1x 32-bit [TIM2]) | -| ADCs | 1x 12-bit | +| Timers | 12 (8x 16-bit, 1x 32-bit [TIM2], 1x Systick, 2x watchdog) | +| ADCs | 1x 12-bit (up to 16 channels) | | UARTs | 8 | | SPIs | 2 | | I2Cs | 2 | -| Vcc | 2.0V - 3.6V | +| CAN | 1 | +| Vcc | 2.0V - 3.6V | | Datasheet | [Datasheet](http://www.st.com/web/en/resource/technical/document/datasheet/DM00115237.pdf) | | Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/DM00031936.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/DM00051352.pdf) | -| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)| +| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf) | ### RIOT static pin mapping please refer to [this](https://docs.google.com/spreadsheets/d/1gnxsux5WpFrn-33Ivb9nGgTBqooqgDYxRkhZms-cvsc/edit?usp=sharing) @@ -41,16 +42,16 @@ document for the pin mapping as implemenented in `boards/nucleo-f091/include/per ### User Interface 1 Button: -| NAME | USER | +| NAME | USER | |:----- |:----- | -| Pin | PC13 | +| Pin | PC13 | 1 LEDs: -| NAME | LED_GREEN | -| ----- | ------------- | -| Color | orange | -| Pin | PA5 | +| NAME | LD2 | +| ----- | ----- | +| Color | green | +| Pin | PA5 | ## Implementation Status @@ -67,22 +68,22 @@ document for the pin mapping as implemenented in `boards/nucleo-f091/include/per ## Flashing the device -The ST Nucleo-F091 board includes an on-board ST-LINK V2 programmer. The +The ST Nucleo-F091RC board includes an on-board ST-LINK V2 programmer. The easiest way to program the board is to use OpenOCD. Once you have installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing ``` -make BOARD=nucleo-f091 flash +make BOARD=nucleo-f091rc flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo-f091 debug +make BOARD=nucleo-f091rc debug ``` ## Supported Toolchains -For using the ST Nucleo-F091 board we strongly recommend the usage of the +For using the ST Nucleo-F091RC board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain. */ diff --git a/boards/nucleo-f103rb/doc.txt b/boards/nucleo-f103rb/doc.txt index fcaf95a184..211da5ffa9 100644 --- a/boards/nucleo-f103rb/doc.txt +++ b/boards/nucleo-f103rb/doc.txt @@ -5,33 +5,35 @@ ## Overview -The Nucleo-F103 is a board from ST's Nucleo family supporting a ARM Cortex-M3 +The Nucleo-F103RB is a board from ST's Nucleo family supporting a ARM Cortex-M3 STM32F103RB microcontroller with 20Kb of SRAM and 128Kb of ROM Flash. ## Hardware -![Nucleo64 F103](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) +![Nucleo64 F103RB](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) ### MCU | MCU | STM32F103RB | -|:------------- |:--------------------- | -| Family | ARM Cortex-M3 | -| Vendor | ST Microelectronics | -| RAM | 20Kb | +|:---------- |:----------------- | +| Family | ARM Cortex-M3 | +| Vendor | ST Microelectronics | +| RAM | 20Kb | | Flash | 128Kb | -| Frequency | up to 72MHz | +| Frequency | up to 72MHz | | FPU | no | -| Timers | 7 (2x watchdog, 1 SysTick, 4x 16-bit) | -| ADCs | 1x 12-bit | +| Timers | 7 (2x watchdog, 1 SysTick, 4x 16-bit) | +| ADCs | 1x 12-bit (16 channels) | | UARTs | 3 | | SPIs | 2 | | I2Cs | 2 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | -| Datasheet | [Datasheet](http://www.st.com/en/evaluation-tools/nucleo-f103rb.html) | -| Reference Manual | [Reference Manual](http://www.st.com/resource/en/datasheet/stm32f103rb.pdf) | -| Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00051352.pdf) | -| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf)| +| USB | 1 | +| CAN | 1 | +| Vcc | 2.0V - 3.6V | +| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f103rb.pdf) | +| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/cd00171190.pdf) | +| Programming Manual | [Programming Manual](https://www.st.com/resource/en/programming_manual/cd00228163.pdf) | +| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf) | ## Implementation Status | Device | ID | Supported | Comments | @@ -47,22 +49,22 @@ STM32F103RB microcontroller with 20Kb of SRAM and 128Kb of ROM Flash. | | Timer | 2 16 bit timers (TIM2 and TIM3) | | ## Flashing the device -The ST Nucleo-F103 board includes an on-board ST-LINK V2 programmer. The +The ST Nucleo-F103RB board includes an on-board ST-LINK V2 programmer. The easiest way to program the board is to use OpenOCD. Once you have installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing: ``` -make BOARD=nucleo-f103 flash +make BOARD=nucleo-f103rb flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo-f103 debug +make BOARD=nucleo-f103rb debug ``` ## Supported Toolchains -For using the ST Nucleo-F103 board we strongly recommend the usage of the +For using the ST Nucleo-F103RB board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain. */ diff --git a/boards/nucleo-f207zg/doc.txt b/boards/nucleo-f207zg/doc.txt index a95d881a89..4c19510336 100644 --- a/boards/nucleo-f207zg/doc.txt +++ b/boards/nucleo-f207zg/doc.txt @@ -5,35 +5,38 @@ ## Overview -The Nucleo144-F207 is a board from ST's Nucleo family supporting a ARM +The Nucleo-F207ZG is a board from ST's Nucleo family supporting a ARM Cortex-M3 STM32F207ZG microcontroller with 128Kb of SRAM and 1Mb of ROM Flash. ## Hardware -![Nucleo144 F207](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo144-board.png) +![Nucleo144 F207ZG](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo144-board.png) ### MCU | MCU | STM32F207ZG | -|:------------- |:--------------------- | -| Family | ARM Cortex-M3 | -| Vendor | ST Microelectronics | -| RAM | 128Kb | +|:---------- |:----------------- | +| Family | ARM Cortex-M3 | +| Vendor | ST Microelectronics | +| RAM | 128Kb | | Flash | 1Mb | -| Frequency | up to 120MHz | +| Frequency | up to 120MHz | | FPU | no | -| Timers | 17 (2x watchdog, 1 SysTick, 12x 16-bit, 2x 32-bit [TIM2]) | -| ADCs | 3x 12-bit | -| UARTs | 4 | +| Timers | 17 (2x watchdog, 1 SysTick, 12x 16-bit, 2x 32-bit [TIM2]) | +| ADCs | 3x 12-bit (24 channels) | +| UARTs | 6 | | SPIs | 3 | | I2Cs | 3 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | +| CAN | 2 | +| USB | 1 | +| Ethernet | 1 | +| Vcc | 1.8V - 3.6V | | Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f207zg.pdf) | | Reference Manual | [Reference Manual](http://www.st.com/resource/en/reference_manual/cd00225773.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/cd00228163.pdf) | -| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00244518.pdf)| +| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00244518.pdf) | ## Implementation Status @@ -56,15 +59,15 @@ OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing ``` -make BOARD=nucleo144-f207 flash +make BOARD=nucleo-f207zg flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo144-f207 debug +make BOARD=nucleo-f207zg debug ``` ## Supported Toolchains -For using the ST Nucleo144-F207 board we strongly recommend the usage of the +For using the ST Nucleo-F207ZG board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain. */ diff --git a/boards/nucleo-f302r8/doc.txt b/boards/nucleo-f302r8/doc.txt index ec97c484a6..83b9dadc24 100644 --- a/boards/nucleo-f302r8/doc.txt +++ b/boards/nucleo-f302r8/doc.txt @@ -5,9 +5,7 @@ ## Overview -Not yet available upstream, see [PR 6615](https://github.com/RIOT-OS/RIOT/pull/6615) - -The [Nucleo-F302](http://www.st.com/en/evaluation-tools/nucleo-f302r8.html) +The [Nucleo-F302R8](http://www.st.com/en/evaluation-tools/nucleo-f302r8.html) is a board from ST's Nucleo family supporting a ARM Cortex-M4 [STM32F302R8](http://www.st.com/en/microcontrollers/stm32f302r8.html) @@ -20,24 +18,26 @@ microcontroller with 16KB of RAM and 64KB of ROM. ### MCU | MCU | STM32F302R8 | -|:------------- |:--------------------- | -| Family | ARM Cortex-M4 | -| Vendor | ST Microelectronics | +|:---------- |:--------------------- | +| Family | ARM Cortex-M4 | +| Vendor | ST Microelectronics | | RAM | 16KB | -| Flash | 64KB | -| Frequency | up to 72MHz | -| FPU | yes | -| Timers | 9 (5x 16-bit, 1x 32-bit [TIM2], 2 watchdog, 1 systick) | -| ADCs | 1 with selectable resolution (6,8,10,12-bit) | -| UARTs | 3 | -| SPIs | 2 | -| I2Cs | 3 | -| RTC | 1 | +| Flash | 64KB | +| Frequency | up to 72MHz | +| FPU | yes | +| Timers | 9 (5x 16-bit, 1x 32-bit [TIM2], 2x watchdog, 1x systick) | +| ADCs | 1 with selectable resolution (6,8,10,12-bit) | +| UARTs | 3 | +| SPIs | 2 | +| I2Cs | 3 | +| RTC | 1 | +| CAN | 1 | +| USB | 1 | | Vcc | 2.0V - 3.6V | -| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f302r6.pdf) | +| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f302r8.pdf) | | Reference Manual | [Reference Manual](http://www.st.com/resource/en/reference_manual/dm00094349.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00046982.pdf) | -| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)| +| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf) | ## Implementation Status @@ -56,17 +56,17 @@ microcontroller with 16KB of RAM and 64KB of ROM. ## Flashing the device -The ST Nucleo-F302 board includes an on-board ST-LINK V2-1 programmer. +The ST Nucleo-F302R8 board includes an on-board ST-LINK V2-1 programmer. The easiest way to program the board is to use OpenOCD. Once you have installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing ``` -make BOARD=nucleo-f302 flash +make BOARD=nucleo-f302r8 flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo-f302 debug +make BOARD=nucleo-f302r8 debug ``` ### Troubleshooting @@ -78,6 +78,6 @@ the ST Link firmware update tool following [this documentation](http://www.st.com/en/embedded-software/stsw-link007.html). ## Supported Toolchains -For using the ST Nucleo-F303RE board we strongly recommend the usage of +For using the ST Nucleo-F302R8 board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain. */ diff --git a/boards/nucleo-f303k8/doc.txt b/boards/nucleo-f303k8/doc.txt index 73743a8fd8..03dd9467d9 100644 --- a/boards/nucleo-f303k8/doc.txt +++ b/boards/nucleo-f303k8/doc.txt @@ -5,43 +5,41 @@ ## Overview -The Nucleo-F303 is a board from ST's Nucleo family supporting a ARM Cortex-M4 -STM32F303RE -microcontroller with 64Kb of RAM and 512Kb of ROM. +The Nucleo-F303K8 is a board from ST's Nucleo family supporting a ARM Cortex-M4 +STM32F303K8 microcontroller with 12Kb of RAM and 64Kb of ROM. ## Hardware -![nucleo image](http://media.digikey.com/Photos/STMicro%20Photos/MFG_NUCLEO.jpg) -![nucleo-f303 pinout](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo-f303_pinout.png) +![nucleo image](https://www.st.com/bin/ecommerce/api/image.PF262496.en.feature-description-include-personalized-no-cpn-medium.jpg) ### MCU -| MCU | STM32F303RE | -|:------------- |:--------------------- | -| Family | ARM Cortex-M4 | -| Vendor | ST Microelectronics | -| RAM | 64Kb | -| Flash | 512Kb | -| Frequency | up to 72MHz) | -| FPU | yes | -| Timers | 14 (13x 16-bit, 1x 32-bit [TIM2]) | -| ADCs | 4x 12-bit | -| UARTs | 5 | -| SPIs | 4 | -| I2Cs | 3 | -| RTC | 1 | +| MCU | STM32F303K8 | +|:---------- |:--------------------- | +| Family | ARM Cortex-M4 | +| Vendor | ST Microelectronics | +| RAM | 12Kb | +| Flash | 64Kb | +| Frequency | up to 72MHz | +| FPU | yes | +| Timers | 8 (4x 16-bit, 1x 32-bit [TIM2], 2x watchdog, 1x Systick) | +| ADCs | 2x 12-bit (9 channels) | +| UARTs | 2 | +| SPIs | 1 | +| I2Cs | 1 | +| RTC | 1 | | Vcc | 2.0V - 3.6V | -| Datasheet | [Datasheet](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00118585.pdf) | -| Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/DM00043574.pdf) | +| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32f303k8.pdf) | +| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00043574.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/DM00046982.pdf) | -| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)| +| Board Manual | [Board Manual](https://www.st.com/resource/en/user_manual/dm00231744.pdf)| ## Implementation Status | Device | ID | Supported | Comments | |:------------- |:------------- |:------------- |:------------- | -| MCU | STM32F303RE | partly | Energy saving modes not fully utilized | +| MCU | STM32F303K8 | partly | Energy saving modes not fully utilized | | Low-level driver | GPIO | yes | | | | PWM | one PWM | | | | UART | three UART | | @@ -52,22 +50,22 @@ microcontroller with 64Kb of RAM and 512Kb of ROM. ## Flashing the device -The ST Nucleo-F303RE board includes an on-board ST-LINK V2 programmer. +The ST Nucleo-F303K8 board includes an on-board ST-LINK V2 programmer. The easiest way to program the board is to use OpenOCD. Once you have installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing. ``` -make flash +BOARD=nucleo-f303k8 make flash ``` and debug via GDB by simply typing ``` -make debug +BOARD=nucleo-f303k8 make debug ``` ## Supported Toolchains -For using the ST Nucleo-F303RE board we strongly recommend the usage of the +For using the ST Nucleo-F303K8 board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain. */ diff --git a/boards/nucleo-f303re/doc.txt b/boards/nucleo-f303re/doc.txt index 84e03de650..34d1c4bb2d 100644 --- a/boards/nucleo-f303re/doc.txt +++ b/boards/nucleo-f303re/doc.txt @@ -5,36 +5,38 @@ ## Overview -The Nucleo-F303 is a board from ST's Nucleo family supporting a ARM Cortex-M4 +The Nucleo-F303RE is a board from ST's Nucleo family supporting a ARM Cortex-M4 STM32F303RE microcontroller with 64Kb of RAM and 512Kb of ROM. ## Hardware -![nucleo image](http://media.digikey.com/Photos/STMicro%20Photos/MFG_NUCLEO.jpg) +![Nucleo64 F303RE](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) ![nucleo-f303 pinout](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo-f303_pinout.png) ### MCU -| MCU | STM32F303RE | -|:------------- |:--------------------- | -| Family | ARM Cortex-M4 | -| Vendor | ST Microelectronics | -| RAM | 64Kb | -| Flash | 512Kb | -| Frequency | up to 72MHz) | +| MCU | STM32F303RE | +|:---------- |:----------------- | +| Family | ARM Cortex-M4 | +| Vendor | ST Microelectronics | +| RAM | 64Kb | +| Flash | 512Kb | +| Frequency | up to 72MHz | | FPU | yes | -| Timers | 14 (13x 16-bit, 1x 32-bit [TIM2]) | -| ADCs | 4x 12-bit | +| Timers | 13 (9x 16-bit, 1x 32-bit [TIM2], 1x Systick, 2x watchdog) | +| ADCs | 4x 12-bit (22 channels) | | UARTs | 5 | | SPIs | 4 | | I2Cs | 3 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | -| Datasheet | [Datasheet](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00118585.pdf) | +| CAN | 1 | +| USB | 1 | +| Vcc | 2.0V - 3.6V | +| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32f303re.pdf) | | Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/DM00043574.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/DM00046982.pdf) | -| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)| +| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf) | @@ -58,11 +60,11 @@ installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing. ``` -make flash +BOARD=nucleo-f303re make flash ``` and debug via GDB by simply typing ``` -make debug +BOARD=nucleo-f303re make debug ``` diff --git a/boards/nucleo-f303ze/doc.txt b/boards/nucleo-f303ze/doc.txt index a01e030e7c..b04515bdbe 100644 --- a/boards/nucleo-f303ze/doc.txt +++ b/boards/nucleo-f303ze/doc.txt @@ -5,43 +5,44 @@ ## Overview -The Nucleo-F303 is a board from ST's Nucleo family supporting a ARM Cortex-M4 -STM32F303RE +The Nucleo-F303ZE is a board from ST's Nucleo family supporting a ARM Cortex-M4 +STM32F303ZE microcontroller with 64Kb of RAM and 512Kb of ROM. ## Hardware -![nucleo image](http://media.digikey.com/Photos/STMicro%20Photos/MFG_NUCLEO.jpg) -![nucleo-f303 pinout](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo-f303_pinout.png) +![Nucleo144 F303ZE](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo144-board.png) ### MCU -| MCU | STM32F303RE | -|:------------- |:--------------------- | -| Family | ARM Cortex-M4 | -| Vendor | ST Microelectronics | -| RAM | 64Kb | -| Flash | 512Kb | -| Frequency | up to 72MHz) | +| MCU | STM32F303ZE | +|:---------- |:----------------- | +| Family | ARM Cortex-M4 | +| Vendor | ST Microelectronics | +| RAM | 64Kb | +| Flash | 512Kb | +| Frequency | up to 72MHz | | FPU | yes | -| Timers | 14 (13x 16-bit, 1x 32-bit [TIM2]) | -| ADCs | 4x 12-bit | +| Timers | 14 (10x 16-bit, 1x 32-bit [TIM2], 1x Systick, 2x watchdog) | +| ADCs | 4x 12-bit (40 channels) | | UARTs | 5 | | SPIs | 4 | | I2Cs | 3 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | -| Datasheet | [Datasheet](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00118585.pdf) | +| CAN | 1 | +| USB | 1 | +| Vcc | 2.0V - 3.6V | +| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32f303ze.pdf) | | Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/DM00043574.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/DM00046982.pdf) | -| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)| +| Board Manual | [Board Manual](https://www.st.com/resource/en/user_manual/dm00244518.pdf) | ## Implementation Status | Device | ID | Supported | Comments | |:------------- |:------------- |:------------- |:------------- | -| MCU | STM32F303RE | partly | Energy saving modes not fully utilized | +| MCU | STM32F303ZE | partly | Energy saving modes not fully utilized | | Low-level driver | GPIO | yes | | | | PWM | one PWM | | | | UART | three UART | | @@ -52,22 +53,22 @@ microcontroller with 64Kb of RAM and 512Kb of ROM. ## Flashing the device -The ST Nucleo-F303RE board includes an on-board ST-LINK V2 programmer. +The ST Nucleo-F303ZE board includes an on-board ST-LINK V2 programmer. The easiest way to program the board is to use OpenOCD. Once you have installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing. ``` -make flash +BOARD=nucleo-f303ze make flash ``` and debug via GDB by simply typing ``` -make debug +BOARD=nucleo-f303ze make debug ``` ## Supported Toolchains -For using the ST Nucleo-F303RE board we strongly recommend the usage of the +For using the ST Nucleo-F303ZE board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain. */ diff --git a/boards/nucleo-f334r8/doc.txt b/boards/nucleo-f334r8/doc.txt index 8d802a1f27..6af40c63c5 100644 --- a/boards/nucleo-f334r8/doc.txt +++ b/boards/nucleo-f334r8/doc.txt @@ -5,35 +5,36 @@ ## Overview -The Nucleo-F334 is a board from ST's Nucleo family supporting a ARM Cortex-M4 +The Nucleo-F334R8 is a board from ST's Nucleo family supporting a ARM Cortex-M4 STM32F334R8 microcontroller with 12Kb of RAM and 64Kb or ROM. ## Hardware -![STM32F3discovery image](http://media.digikey.com/Photos/STMicro%20Photos/MFG_NUCLEO.jpg) +![Nucleo64 F334R8](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) ![nucleo-f334 pinout](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo-f334_pinout.png) ### MCU -| MCU | STM32F091RC | -|:------------- |:--------------------- | -| Family | ARM Cortex-M4 | -| Vendor | ST Microelectronics | -| RAM | 12Kb | +| MCU | STM32F334R8 | +|:---------- |:----------------- | +| Family | ARM Cortex-M4 | +| Vendor | ST Microelectronics | +| RAM | 12Kb | | Flash | 64Kb | -| Frequency | up to 72MHz) | +| Frequency | up to 72MHz | | FPU | yes | -| Timers | 9 (8x 16-bit, 1x 32-bit [TIM2]) | -| ADCs | 2x 12-bit | -| UARTs | 8 | +| Timers | 12 (8x 16-bit, 1x 32-bit [TIM2], 1x Systick, 2x watchdog) | +| ADCs | 2x 12-bit (21 channels) | +| UARTs | 3 | | SPIs | 1 | | I2Cs | 1 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | -| Datasheet | [Datasheet](http://www.st.com/web/en/resource/technical/document/datasheet/DM00115237.pdf) | -| Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/DM00031936.pdf) | -| Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/DM00051352.pdf) | -| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)| +| CAN | 1 | +| Vcc | 2.0V - 3.6V | +| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32f334r8.pdf) | +| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00093941.pdf) | +| Programming Manual | [Programming Manual](https://www.st.com/resource/en/programming_manual/dm00046982.pdf) | +| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)| @@ -58,11 +59,11 @@ OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing ``` -make flash +BOARD=nucleo-f334r8 make flash ``` and debug via GDB by simply typing ``` -make debug +BOARD=nucleo-f334r8 make debug ``` diff --git a/boards/nucleo-f401re/doc.txt b/boards/nucleo-f401re/doc.txt index ef75203f9d..6b545d32d9 100644 --- a/boards/nucleo-f401re/doc.txt +++ b/boards/nucleo-f401re/doc.txt @@ -5,35 +5,35 @@ ## Overview -The Nucleo-F401 is a board from ST's Nucleo family supporting a ARM Cortex-M4 +The Nucleo-F401RE is a board from ST's Nucleo family supporting a ARM Cortex-M4 STM32F401RE microcontroller with 96Kb of SRAM and 512Kb of ROM Flash. ## Hardware -![Nucleo64 F401](http://www.open-electronics.org/wp- -content/uploads/2015/08/Figura2-500x467.png) +![Nucleo64 F401RE](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) ### MCU | MCU | STM32F401RE | -|:------------- |:--------------------- | -| Family | ARM Cortex-M4 | -| Vendor | ST Microelectronics | -| RAM | 96Kb | +|:---------- |:----------------- | +| Family | ARM Cortex-M4 | +| Vendor | ST Microelectronics | +| RAM | 96Kb | | Flash | 512Kb | -| Frequency | up to 84MHz | +| Frequency | up to 84MHz | | FPU | yes | -| Timers | 11 (2x watchdog, 1 SysTick, 6x 16-bit, 2x 32-bit [TIM2]) | -| ADCs | 1x 12-bit | +| Timers | 11 (2x watchdog, 1 SysTick, 6x 16-bit, 2x 32-bit [TIM2]) | +| ADCs | 1x 12-bit (16 channels) | | UARTs | 3 | -| SPIs | 4 | +| SPIs | 3 | | I2Cs | 3 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | +| USB | 1 | +| Vcc | 1.7V - 3.6V | | Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f401re.pdf) | -| Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/DM00031936.pdf) | +| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00096844.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00046982.pdf) | -| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf)| +| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf) | ## Implementation Status @@ -56,16 +56,16 @@ OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing ``` -make BOARD=nucleo-f401 flash +make BOARD=nucleo-f401re flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo-f401 debug +make BOARD=nucleo-f401re debug ``` ## Supported Toolchains -For using the ST Nucleo-F401 board we strongly recommend the usage of the +For using the ST Nucleo-F401RE board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm- embedded) toolchain. diff --git a/boards/nucleo-f410rb/doc.txt b/boards/nucleo-f410rb/doc.txt index b958af6cab..15f706ee6a 100644 --- a/boards/nucleo-f410rb/doc.txt +++ b/boards/nucleo-f410rb/doc.txt @@ -5,36 +5,34 @@ ## Overview -Not yet available upstream, see [PR 6025](https://github.com/RIOT-OS/RIOT/pull/6025) - -The Nucleo-F410 is a board from ST's Nucleo family supporting a ARM Cortex-M4 +The Nucleo-F410RB is a board from ST's Nucleo family supporting a ARM Cortex-M4 STM32F410RB microcontroller with 32Kb of SRAM and 128Kb of ROM Flash. ## Hardware -![Nucleo64 F410](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) +![Nucleo64 F410RB](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) ### MCU -| MCU | STM32F410RB | -|:------------- |:--------------------- | -| Family | ARM Cortex-M4 | -| Vendor | ST Microelectronics | -| RAM | 32Kb | +| MCU | STM32F410RBT | +|:---------- |:----------------- | +| Family | ARM Cortex-M4 | +| Vendor | ST Microelectronics | +| RAM | 32Kb | | Flash | 128Kb | -| Frequency | up to 100MHz | +| Frequency | up to 100MHz | | FPU | yes | -| Timers | 9 (2x watchdog, 1 SysTick, 4x 16-bit, 1x 32-bit [TIM2] and 1 low power timer) | -| ADCs | 1x 12-bit | +| Timers | 9 (2x watchdog, 1x SysTick, 4x 16-bit, 1x 32-bit [TIM2] and 1 low power timer) | +| ADCs | 1x 12-bit (16 channels) | | UARTs | 3 | | SPIs | 3 | | I2Cs | 3 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | +| Vcc | 1.8V - 3.6V | | Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f410rb.pdf) | | Reference Manual | [Reference Manual](http://www.st.com/resource/en/reference_manual/dm00180366.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00046982.pdf) | -| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf)| +| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf)| ## Implementation Status @@ -59,16 +57,16 @@ version instructions), you can flash the board simply by typing ``` -make BOARD=nucleo-f410 flash +make BOARD=nucleo-f410rb flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo-f410 debug +make BOARD=nucleo-f410rb debug ``` ## Supported Toolchains -For using the ST Nucleo-F410 board we strongly recommend the usage of the +For using the ST Nucleo-F410RB board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain. */ diff --git a/boards/nucleo-f411re/doc.txt b/boards/nucleo-f411re/doc.txt index ce01957d87..e5ff23d546 100644 --- a/boards/nucleo-f411re/doc.txt +++ b/boards/nucleo-f411re/doc.txt @@ -5,35 +5,35 @@ ## Overview -The Nucleo-F411 is a board from ST's Nucleo family supporting a ARM Cortex-M4 +The Nucleo-F411RE is a board from ST's Nucleo family supporting a ARM Cortex-M4 STM32F411RE microcontroller with 128Kb of SRAM and 512Kb of ROM Flash. ## Hardware -![Nucleo64 F401](http://www.open-electronics.org/wp- -content/uploads/2015/08/Figura2-500x467.png) +![Nucleo64 F411RE](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) ### MCU | MCU | STM32F411RE | -|:------------- |:--------------------- | -| Family | ARM Cortex-M4 | -| Vendor | ST Microelectronics | -| RAM | 128Kb | +|:---------- |:----------------- | +| Family | ARM Cortex-M4 | +| Vendor | ST Microelectronics | +| RAM | 128Kb | | Flash | 512Kb | -| Frequency | up to 100MHz | +| Frequency | up to 100MHz | | FPU | yes | -| Timers | 11 (2x watchdog, 1 SysTick, 6x 16-bit, 2x 32-bit [TIM2]) | -| ADCs | 1x 12-bit | +| Timers | 11 (2x watchdog, 1 SysTick, 7x 16-bit, 1x 32-bit [TIM2]) | +| ADCs | 1x 12-bit (16 channels) | | UARTs | 3 | | SPIs | 5 | | I2Cs | 3 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | +| USB | 1 | +| Vcc | 1.7V - 3.6V | | Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f411re.pdf) | | Reference Manual | [Reference Manual](http://www.st.com/resource/en/reference_manual/dm00119316.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00046982.pdf) | -| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf)| +| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf) | ## Implementation Status @@ -56,16 +56,16 @@ OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing ``` -make BOARD=nucleo-f411 flash +make BOARD=nucleo-f411re flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo-f411 debug +make BOARD=nucleo-f411re debug ``` ## Supported Toolchains -For using the ST Nucleo-F411 board we strongly recommend the usage of the +For using the ST Nucleo-F411RE board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm- embedded) toolchain. diff --git a/boards/nucleo-f446re/doc.txt b/boards/nucleo-f446re/doc.txt index 17fe0e8b14..b38fae6020 100644 --- a/boards/nucleo-f446re/doc.txt +++ b/boards/nucleo-f446re/doc.txt @@ -5,34 +5,36 @@ ## Overview -The Nucleo-F446 is a board from ST's Nucleo family supporting a ARM Cortex-M4 +The Nucleo-F446RE is a board from ST's Nucleo family supporting a ARM Cortex-M4 STM32F446RE microcontroller with 128Kb of RAM and 512Kb of ROM Flash. ## Hardware -![Nucleo64 F446](http://www.open-electronics.org/wp- +![Nucleo64 F446RE](http://www.open-electronics.org/wp- content/uploads/2015/08/Figura2-500x467.png) ### MCU | MCU | STM32F446RE | -|:------------- |:--------------------- | -| Family | ARM Cortex-M4 | -| Vendor | ST Microelectronics | -| RAM | 128Kb | +|:---------- |:----------------- | +| Family | ARM Cortex-M4 | +| Vendor | ST Microelectronics | +| RAM | 128Kb | | Flash | 512Kb | -| Frequency | up to 180MHz | +| Frequency | up to 180MHz | | FPU | yes | -| Timers | 11 (2x watchdog, 1 SysTick, 12x 16-bit, 2x 32-bit [TIM2]) | -| ADCs | 3x 12-bit | -| UARTs | 4 | +| Timers | 17 (2x watchdog, 1 SysTick, 12x 16-bit, 2x 32-bit [TIM2]) | +| ADCs | 3x 12-bit (16 channels) | +| UARTs | 6 | | SPIs | 4 | | I2Cs | 4 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | +| CAN | 2 | +| USB | 1 | +| Vcc | 1.8V - 3.6V | | Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f446re.pdf) | -| Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/DM00031936.pdf) | -| Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/DM00051352.pdf) | +| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00135183.pdf) | +| Programming Manual | [Programming Manual](https://www.st.com/resource/en/programming_manual/dm00046982.pdf) | | Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)| ## Implementation Status @@ -56,11 +58,11 @@ OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing ``` -make BOARD=nucleo-f446 flash +make BOARD=nucleo-f446re flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo-f446 debug +make BOARD=nucleo-f446re debug ``` ## Supported Toolchains diff --git a/boards/nucleo-f446ze/doc.txt b/boards/nucleo-f446ze/doc.txt index 22d169e6a0..87ca49cbdf 100644 --- a/boards/nucleo-f446ze/doc.txt +++ b/boards/nucleo-f446ze/doc.txt @@ -5,41 +5,42 @@ ## Overview -The Nucleo-F446 is a board from ST's Nucleo family supporting a ARM Cortex-M4 -STM32F446RE microcontroller with 128Kb of RAM and 512Kb of ROM Flash. +The Nucleo-F446ZE is a board from ST's Nucleo family supporting a ARM Cortex-M4 +STM32F446ZE microcontroller with 128Kb of RAM and 512Kb of ROM Flash. ## Hardware -![Nucleo64 F446](http://www.open-electronics.org/wp- -content/uploads/2015/08/Figura2-500x467.png) +![Nucleo144 F446ZE](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo144-board.png) ### MCU -| MCU | STM32F446RE | -|:------------- |:--------------------- | -| Family | ARM Cortex-M4 | -| Vendor | ST Microelectronics | -| RAM | 128Kb | +| MCU | STM32F446ZE | +|:---------- |:----------------- | +| Family | ARM Cortex-M4 | +| Vendor | ST Microelectronics | +| RAM | 128Kb | | Flash | 512Kb | -| Frequency | up to 180MHz | +| Frequency | up to 180MHz | | FPU | yes | -| Timers | 11 (2x watchdog, 1 SysTick, 12x 16-bit, 2x 32-bit [TIM2]) | -| ADCs | 3x 12-bit | -| UARTs | 4 | +| Timers | 17 (2x watchdog, 1 SysTick, 12x 16-bit, 2x 32-bit [TIM2]) | +| ADCs | 3x 12-bit (24 channels) | +| UARTs | 6 | | SPIs | 4 | | I2Cs | 4 | | RTC | 1 | -| Vcc | 2.0V - 3.6V | -| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f446re.pdf) | -| Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/DM00031936.pdf) | -| Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/DM00051352.pdf) | -| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)| +| CAN | 2 | +| USB | 1 | +| Vcc | 1.8V - 3.6V | +| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f446ze.pdf) | +| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00135183.pdf) | +| Programming Manual | [Programming Manual](https://www.st.com/resource/en/programming_manual/dm00046982.pdf) | +| Board Manual | [Board Manual](https://www.st.com/resource/en/user_manual/dm00244518.pdf)| ## Implementation Status | Device | ID | Supported | Comments | |:------------- |:------------- |:------------- |:------------- | -| MCU | STM32F446RE | partly | Energy saving modes not fully utilized | +| MCU | STM32F446ZE | partly | Energy saving modes not fully utilized | | Low-level driver | GPIO | yes | | | | PWM | yes (9 pins available) | | | | UART | 3 UARTs | USART2 via STLink/USB or D0(RX)/D1(TX), USART3 on PC11(RX)/PC10(TX) and USART1 on PA10(RX)/PA9(TX) | @@ -50,22 +51,22 @@ content/uploads/2015/08/Figura2-500x467.png) ## Flashing the device -The ST Nucleo-F446RE board includes an on-board ST-LINK V2 programmer. The +The ST Nucleo-F446ZE board includes an on-board ST-LINK V2 programmer. The easiest way to program the board is to use OpenOCD. Once you have installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD) for installation instructions), you can flash the board simply by typing ``` -make BOARD=nucleo-f446 flash +make BOARD=nucleo-f446ze flash ``` and debug via GDB by simply typing ``` -make BOARD=nucleo-f446 debug +make BOARD=nucleo-f446ze debug ``` ## Supported Toolchains -For using the ST Nucleo-F446RE board we strongly recommend the usage of the +For using the ST Nucleo-F446ZE board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm- embedded) toolchain. diff --git a/boards/nucleo-l152re/doc.txt b/boards/nucleo-l152re/doc.txt index 80e4eb88d8..c8524855d9 100644 --- a/boards/nucleo-l152re/doc.txt +++ b/boards/nucleo-l152re/doc.txt @@ -5,38 +5,39 @@ ## Hardware -![st-nucleo-l1](https://cloud.githubusercontent.com/assets/56618/5190201/f87455ae-74e3-11e4-9d24-21a334e01858.png) +![Nucleo64 L152RE](http://www.open-electronics.org/wp-content/uploads/2015/08/Figura2-500x467.png) ### MCU -| MCU | STM32L152RE | -|:------------- |:--------------------- | -| Family | ARM Cortex-M3 | -| Vendor | ST Microelectronics | -| RAM | 80Kb | +| MCU | STM32L152RE | +|:---------- |:----------------- | +| Family | ARM Cortex-M3 | +| Vendor | ST Microelectronics | +| RAM | 80Kb | | Flash | 512Kb | -| Frequency | 32MHz (no external oscilator connected) | +| EEPROM | 16KB | +| Frequency | up to 32MHz | | FPU | no | -| Timers | 8 (8x 16-bit, 1x 32-bit [TIM5]) | -| ADCs | 1x 42-channel 12-bit | -| UARTs | 3 | -| SPIs | 2 | +| Timers | 12 (8x 16-bit, 1x 32-bit [TIM5], 1x Systick, 2x watchdog) | +| ADCs | 1x 12-bit (21 channels) | +| UARTs | 5 | +| SPIs | 3-8 (UARTs can be configured as SPIs) | | I2Cs | 2 | -| Vcc | 1.65V - 3.6V | -| Datasheet | [Datasheet](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00098321.pdf) | +| Vcc | 1.65V - 3.6V | +| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32l152re.pdf) | | Reference Manual | [Reference Manual](http://www.st.com/resource/en/reference_manual/cd00240193.pdf) | | Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/CD00228163.pdf) | -| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)| +| Board Manual | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf) | ### User Interface -2 Button: +2 Buttons: -| NAME | USER | RESET | -|:----- |:----- |:--------- | +| NAME | USER | RESET | +|:------ |:--------- |:----- | | Pin | PC13 (IN) | NRST | -1 LEDs: +1 LED: | NAME | LD2 | | ----- | ----- | @@ -46,7 +47,7 @@ ## Supported Toolchains -For using the st-nucleo-l1 board we strongly recommend the usage of the [GNU +For using the Nucleo-L152RE board we strongly recommend the usage of the [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded) toolchain.