Merge pull request #9521 from OTAkeys/pr/stm32f0_pm

cpu/stm32f0: add periph_pm support

cpu/stm32_common/include/periph_cpu_common.h

@@ -74,12 +74,17 @@ extern "C" {
 #define PERIPH_SPI_NEEDS_TRANSFER_REGS
 /** @} */
 
+/**
+ * @name    PM definitions
+ * @{
+ */
+#if defined(CPU_FAM_STM32F0) || defined(CPU_FAM_STM32F1) || \
+    defined(CPU_FAM_STM32F2) || defined(CPU_FAM_STM32F4) || \
+    defined(CPU_FAM_STM32L0) || defined(CPU_FAM_STM32L1) || \
+    defined(DOXYGEN)
 /**
  * @brief   Number of usable low power modes
  */
-#if defined(CPU_FAM_STM32F1) || defined(CPU_FAM_STM32F2) || \
-    defined(CPU_FAM_STM32F4) || defined(CPU_FAM_STM32L0) || \
-    defined(CPU_FAM_STM32L1) || defined(DOXYGEN)
 #define PM_NUM_MODES    (2U)
 
 /**
@@ -89,7 +94,15 @@ extern "C" {
 #define STM32_PM_STOP         (1U)
 #define STM32_PM_STANDBY      (0U)
 /** @} */
+
+#ifndef PM_EWUP_CONFIG
+/**
+ * @brief   Wake-up pins configuration (CSR register)
+ */
+#define PM_EWUP_CONFIG          (0U)
 #endif
+#endif
+/** @} */
 
 /**
  * @brief   Available peripheral buses

cpu/stm32_common/periph/pm.c

@@ -2,6 +2,7 @@
  * Copyright (C) 2016 Kaspar Schleiser <kaspar@schleiser.de>
  *               2015 Freie Universität Berlin
  *               2015 Engineering-Spirit
+ *               2017-2019 OTA keys S.A.
  *
  * This file is subject to the terms and conditions of the GNU Lesser
  * General Public License v2.1. See the file LICENSE in the top level
@@ -19,17 +20,14 @@
  * @author      Nick v. IJzendoorn <nijzndoorn@engineering-spirit.nl>
  * @author      Kaspar Schleiser <kaspar@schleiser.de>
  * @author      Fabian Nack <nack@inf.fu-berlin.de>
+ * @author      Vincent Dupont <vincent@otakeys.com>
  *
  * @}
  */
 
 #include "irq.h"
 #include "periph/pm.h"
-#if defined(CPU_FAM_STM32F1) || defined(CPU_FAM_STM32F2) || \
-    defined(CPU_FAM_STM32F4) || defined(CPU_FAM_STM32L0) || \
-    defined(CPU_FAM_STM32L1)
 #include "stmclk.h"
-#endif
 
 #define ENABLE_DEBUG (0)
 #include "debug.h"
@@ -40,81 +38,66 @@
  *
  * Available values can be found in reference manual, PWR section, register CR.
  */
-#define PM_STOP_CONFIG (PWR_CR_LPDS | PWR_CR_FPDS)
+#if defined(CPU_FAM_STM32F0)
+#define PM_STOP_CONFIG  (PWR_CR_LPDS)
+#elif defined(CPU_FAM_STM32L0) || defined(CPU_FAM_STM32L1)
+#define PM_STOP_CONFIG  (PWR_CR_LPSDSR | PWR_CR_ULP)
+#else
+#define PM_STOP_CONFIG  (PWR_CR_LPDS | PWR_CR_FPDS)
+#endif
+#endif
+
+#ifndef PM_STANDBY_CONFIG
+/**
+ * @brief Define config flags for standby mode
+ *
+ * Available values can be found in reference manual, PWR section, register CR.
+ */
+#if defined(CPU_FAM_STM32L0) || defined(CPU_FAM_STM32L1)
+#define PM_STANDBY_CONFIG   (PWR_CR_PDDS | PWR_CR_CWUF | PWR_CR_CSBF | PWR_CR_ULP)
+#else
+#define PM_STANDBY_CONFIG   (PWR_CR_PDDS | PWR_CR_CWUF | PWR_CR_CSBF)
+#endif
 #endif
 
 void pm_set(unsigned mode)
 {
-    int deep = 0;
+    int deep;
 
-/* I just copied it from stm32f1/2/4, but I suppose it would work for the
- * others... /KS */
-#if defined(CPU_FAM_STM32F1) || defined(CPU_FAM_STM32F2) || \
-    defined(CPU_FAM_STM32F4) || defined(CPU_FAM_STM32L0) || \
-    defined(CPU_FAM_STM32L1)
     switch (mode) {
+#ifdef STM32_PM_STANDBY
         case STM32_PM_STANDBY:
-            /* Set PDDS to enter standby mode on deepsleep and clear flags */
+            PWR->CR &= ~(PM_STOP_CONFIG | PM_STANDBY_CONFIG);
-            PWR->CR |= (PWR_CR_PDDS | PWR_CR_CWUF | PWR_CR_CSBF);
+            PWR->CR |= PM_STANDBY_CONFIG;
             /* Enable WKUP pin to use for wakeup from standby mode */
-#if defined(CPU_FAM_STM32L0) || defined(CPU_FAM_STM32L1)
+            PWR->CSR |= PM_EWUP_CONFIG;
-            /* Enable Ultra Low Power mode */
-            PWR->CR |= PWR_CR_ULP;
-
-            PWR->CSR |= PWR_CSR_EWUP1;
-#if !defined(CPU_LINE_STM32L053xx)
-            /* STM32L053 only have 2 wake pins */
-            PWR->CSR |= PWR_CSR_EWUP3;
-#endif
-#else
-            PWR->CSR |= PWR_CSR_EWUP;
-#endif
             /* Set SLEEPDEEP bit of system control block */
             deep = 1;
             break;
-        case STM32_PM_STOP:
-#if defined(CPU_FAM_STM32L0) || defined(CPU_FAM_STM32L1)
-            /* Clear Wakeup flag */
-            PWR->CR |= PWR_CR_CWUF;
-            /* Clear PDDS to enter stop mode on  */
-            PWR->CR &= ~(PWR_CR_PDDS);
-            /* Regulator in LP mode */
-            PWR->CR |= PWR_CR_LPSDSR;
-
-            /* Enable Ultra Low Power mode*/
-            PWR->CR |= PWR_CR_ULP;
-#else
-            /* Clear PDDS and LPDS bits to enter stop mode on */
-            /* deepsleep with voltage regulator on */
-            PWR->CR &= ~(PWR_CR_PDDS | PWR_CR_LPDS);
-            PWR->CR |= PM_STOP_CONFIG;
 #endif
+#ifdef STM32_PM_STOP
+        case STM32_PM_STOP:
+            PWR->CR &= ~(PM_STOP_CONFIG | PM_STANDBY_CONFIG);
+            PWR->CR |= PM_STOP_CONFIG;
             /* Set SLEEPDEEP bit of system control block */
             deep = 1;
             break;
+#endif
+        default:
+            deep = 0;
+            break;
     }
-#else
-    (void) mode;
-#endif
 
     cortexm_sleep(deep);
 
-#if defined(CPU_FAM_STM32F1) || defined(CPU_FAM_STM32F2) || \
-    defined(CPU_FAM_STM32F4) || defined(CPU_FAM_STM32L0) || \
-    defined(CPU_FAM_STM32L1)
     if (deep) {
         /* Re-init clock after STOP */
         stmclk_init_sysclk();
     }
-#endif
 }
 
-#if defined(CPU_FAM_STM32F1) || defined(CPU_FAM_STM32F2) || \
-    defined(CPU_FAM_STM32F4) || defined(CPU_FAM_STM32L0) || \
-    defined(CPU_FAM_STM32L1)
 void pm_off(void)
 {
     irq_disable();
     pm_set(0);
 }
-#endif

cpu/stm32f0/Makefile.include

@@ -1,5 +1,7 @@
 export CPU_ARCH = cortex-m0
 export CPU_FAM  = stm32f0
 
+USEMODULE += pm_layered
+
 include $(RIOTCPU)/stm32_common/Makefile.include
 include $(RIOTMAKE)/arch/cortexm.inc.mk