RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity

Merge pull request #14201 from maribu/board-doc

Browse Source 
boards: Fix incorrect units and alignment
This commit is contained in:
Francisco 2020-06-16 13:21:29 +02:00 committed by GitHub
commit c290bdf9cc
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
25 changed files with 413 additions and 413 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
boards/6lowpan-clicker/doc.txt
View File

@ -21,8 +21,8 @@ found in the [manual](https://download.mikroe.com/documents/starter-boards/click
|:---------- |:-------------------- |
| Family | PIC32MX (MIPS M4K) |
| Vendor | Microchip |
| RAM | 128Kb |
| Flash | 512Kb |
| RAM | 128KiB |
| Flash | 512KiB |
| Frequency | 120MHz |
| FPU | no |
| Timers | 5 (all 16-bit) |

32
boards/airfy-beacon/doc.txt
View File

@ -6,7 +6,7 @@
## Overview
The Airfy Beacon is utilizing a Nordics NRF51822QFAA SoC.
The SoC features 16Kb of RAM, 256Kb of flash ROM and comes on top of the
The SoC features 16KiB of RAM, 256KiB of flash ROM and comes on top of the
usual micro-controller peripherals with a 2.4GHz radio that supports both
Nordics proprietary ShockBurst as well as Bluetooth Low Energy (BLE).
@ -19,22 +19,22 @@ The board was available via
![airfy-beacon]
(https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/airfy-beacon.jpg)
| MCU | NRF51822QFAA |
|:------------- |:--------------------- |
| Family | ARM Cortex-M0 |
| Vendor | Nordic Semiconductor |
| RAM | 16Kb |
| Flash | 256Kb |
| Frequency | 16MHz |
| FPU | no |
| Timers | 3 (2x 16-bit, 1x 32-bit [TIMER0]) |
| ADCs | 1x 10-bit (8 channels) |
| UARTs | 1 |
| SPIs | 2 |
| I2Cs | 2 |
| Vcc | 1.8V - 3.6V |
| MCU | NRF51822QFAA |
|:--------------------- |:--------------------------------- |
| Family | ARM Cortex-M0 |
| Vendor | Nordic Semiconductor |
| RAM | 16KiB |
| Flash | 256KiB |
| Frequency | 16MHz |
| FPU | no |
| Timers | 3 (2x 16-bit, 1x 32-bit [TIMER0]) |
| ADCs | 1x 10-bit (8 channels) |
| UARTs | 1 |
| SPIs | 2 |
| I2Cs | 2 |
| Vcc | 1.8V - 3.6V |
| Product Specification | [Product Specification](https://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.3.pdf) |
| Reference Manual | [Reference Manual](https://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.1.pdf) |
| Reference Manual | [Reference Manual](https://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.1.pdf) |
## Unlocking the flash memory

38
boards/arduino-zero/doc.txt
View File

@ -6,8 +6,8 @@
## Overview
The `Arduino Zero` is a board by Arduino/Genuino featuring a ATSAMD21G18A.
The SAMD21 is a ARM Cortex-M0+ micro-controller. It has 256Kb of flash memory
and 32Kb of RAM.
The SAMD21 is a ARM Cortex-M0+ micro-controller. It has 256KiB of flash memory
and 32KiB of RAM.
This board is available [here](https://store.arduino.cc/product/GBX00003).
@ -17,28 +17,28 @@ This board is available [here](https://store.arduino.cc/product/GBX00003).
### MCU
| MCU | ATSAMD21G18A |
|:------------- |:--------------------- |
| Family | ARM Cortex-M0+ |
| Vendor | Atmel |
| RAM | 32Kb |
| Flash | 256Kb |
| Frequency | up to 48MHz |
| FPU | no |
| Timers | 6 (1x 16-bit, 2x 24-bit, 3x 32-bit) |
| ADCs | 6x 12-bit channels) |
| UARTs | 2 |
| SPIs | max 6 (see UART) |
| I2Cs | max 6 (see UART) |
| Vcc | 1.8V - 3.6V |
| Datasheet | [Datasheet](http://ww1.microchip.com/downloads/en/DeviceDoc/SAM_D21_DA1_Family_Data%20Sheet_DS40001882E.pdf) |
| MCU | ATSAMD21G18A |
|:------------- |:------------------------------------- |
| Family | ARM Cortex-M0+ |
| Vendor | Atmel |
| RAM | 32KiB |
| Flash | 256KiB |
| Frequency | up to 48MHz |
| FPU | no |
| Timers | 6 (1x 16-bit, 2x 24-bit, 3x 32-bit) |
| ADCs | 6x 12-bit channels) |
| UARTs | 2 |
| SPIs | max 6 (see UART) |
| I2Cs | max 6 (see UART) |
| Vcc | 1.8V - 3.6V |
| Datasheet | [Datasheet](http://ww1.microchip.com/downloads/en/DeviceDoc/SAM_D21_DA1_Family_Data%20Sheet_DS40001882E.pdf) |
### User Interface
1 LED:
| Device | PIN |
|:------ |:--- |
| Device | PIN |
|:------ |:---- |
| LED0 | PA17 |

32
boards/cc1312-launchpad/doc.txt
View File

@ -13,22 +13,22 @@ Cortex-M4F microcontroller alongside a dedicated Cortex-M0 to control radio.
![LAUNCHXL-CC1312R1](http://www.ti.com/diagrams/launchxl-cc1312r1_cc1312r1-top-prof1.jpg)
| MCU | CC1312R1 |
|:------------ |:----------------- |
| Family | ARM Cortex-M4F |
| Vendor | Texas Instruments |
| RAM | 80 Kb |
| Flash | 352 Kb |
| Frequency | 48 MHz |
| FPU | yes |
| Timers | 4 |
| ADCs | 1x 12-bt (channels) |
| UARTs | 2 |
| SPIs | 2 |
| I2Cs | 1 |
| Vcc | 1.8V - 3.8V |
| Datasheet | [Datasheet](http://www.ti.com/lit/ds/symlink/cc1312r.pdf) (pdf file) |
| Reference Manual | [Reference Manual](http://www.ti.com/lit/ug/swcu185d/swcu185d.pdf) |
| MCU | CC1312R1 |
|:----------------- |:--------------------- |
| Family | ARM Cortex-M4F |
| Vendor | Texas Instruments |
| RAM | 80KiB |
| Flash | 352KiB |
| Frequency | 48MHz |
| FPU | yes |
| Timers | 4 |
| ADCs | 1x 12-bit (channels) |
| UARTs | 2 |
| SPIs | 2 |
| I2Cs | 1 |
| Vcc | 1.8V - 3.8V |
| Datasheet | [Datasheet](http://www.ti.com/lit/ds/symlink/cc1312r.pdf) (pdf file) |
| Reference Manual | [Reference Manual](http://www.ti.com/lit/ug/swcu185d/swcu185d.pdf) |
## Board pinout

32
boards/cc2538dk/doc.txt
View File

@ -13,22 +13,22 @@ microcontroller with an IEEE802.15.4 radio.
![cc2538dk](http://www.ti.com/diagrams/cc2538dk_cc2538dk_web_1.jpg)
| MCU | CC2538SF53 |
|:------------- |:--------------------- |
| Family | ARM Cortex-M3 |
| Vendor | Texas Instruments |
| RAM | 32Kb |
| Flash | 512Kb |
| Frequency | 32MHz |
| FPU | no |
| Timers | 4 |
| ADCs | 1x 12-bit (8 channels) |
| UARTs | 2 |
| SPIs | 2 |
| I2Cs | 1 |
| Vcc | 2V - 3.6V |
| Datasheet | [Datasheet](http://www.ti.com/lit/gpn/cc2538) (pdf file) |
| Reference Manual | [Reference Manual](http://www.ti.com/lit/pdf/swru319) |
| MCU | CC2538SF53 |
|:----------------- |:------------------------- |
| Family | ARM Cortex-M3 |
| Vendor | Texas Instruments |
| RAM | 32KiB |
| Flash | 512KiB |
| Frequency | 32MHz |
| FPU | no |
| Timers | 4 |
| ADCs | 1x 12-bit (8 channels) |
| UARTs | 2 |
| SPIs | 2 |
| I2Cs | 1 |
| Vcc | 2V - 3.6V |
| Datasheet | [Datasheet](http://www.ti.com/lit/gpn/cc2538) (pdf file) |
| Reference Manual | [Reference Manual](http://www.ti.com/lit/pdf/swru319) |
## Flashing and Debugging

34
boards/cc2650stk/doc.txt
View File

@ -16,23 +16,23 @@ Use `BOARD=cc2650stk` for building RIOT for this platform.
## Components
| MCU | CC2650f128 |
|:------------- |:--------------------- |
| Family | ARM Cortex-M3 |
| Vendor | Texas Instruments |
| RAM | 20KB |
| Flash | 128KB |
| Frequency - Standby | 31.26kHz, 32kHz or 32.768kHz |
| Frequency - Active / Idle | 48MHz |
| RF core | ARM Cortex-M0 CPU, 4KB RAM |
| Timers | 4x 32-bit |
| ADCs | 1x 12-bit (8 channels) |
| UARTs | 2 |
| SPIs | 2 |
| I2C | 1 |
| I2S | 1 |
| Datasheet | [Datasheet](http://www.ti.com/lit/ds/symlink/cc2650.pdf) |
| Reference Manual | [Reference Manual](https://www.ti.com/lit/ug/swcu117h/swcu117h.pdf) |
| MCU | CC2650f128 |
|:------------------------- |:----------------------------- |
| Family | ARM Cortex-M3 |
| Vendor | Texas Instruments |
| RAM | 20KiB |
| Flash | 128KiB |
| Frequency - Standby | 31.26kHz, 32kHz or 32.768kHz |
| Frequency - Active / Idle | 48MHz |
| RF core | ARM Cortex-M0 CPU, 4KiB RAM |
| Timers | 4x 32-bit |
| ADCs | 1x 12-bit (8 channels) |
| UARTs | 2 |
| SPIs | 2 |
| I2C | 1 |
| I2S | 1 |
| Datasheet | [Datasheet](http://www.ti.com/lit/ds/symlink/cc2650.pdf) |
| Reference Manual | [Reference Manual](https://www.ti.com/lit/ug/swcu117h/swcu117h.pdf) |
## Implementation Status

34
boards/chronos/doc.txt
View File

@ -9,23 +9,23 @@
(http://riot-os.org/images/hardware-watch-riot.png)
# MCU
| MCU | TI CC430F6137 |
|:------------- |:--------------------- |
| Family | MSP430 |
| Vendor | Texas Instruments |
| Package | 64VQFN |
| RAM | 4Kb |
| Flash | 32Kb |
| Frequency | 20MHz |
| FPU | no |
| Timers | 2 (2x 16bit) |
| ADCs | 1x 8 channel 12-bit |
| UARTs | 1 |
| SPIs | 2 |
| I2Cs | 1 |
| Vcc | 2.0V - 3.6V |
| Datasheet / Reference Manual | [Datasheet](http://www.ti.com/lit/gpn/cc430f6137) |
| Board Manual | [User Guide](http://www.ti.com/lit/pdf/slau292)|
| MCU | TI CC430F6137 |
|:----------------------------- |:--------------------- |
| Family | MSP430 |
| Vendor | Texas Instruments |
| Package | 64VQFN |
| RAM | 4KiB |
| Flash | 32KiB |
| Frequency | 20MHz |
| FPU | no |
| Timers | 2 (2x 16bit) |
| ADCs | 1x 8 channel 12-bit |
| UARTs | 1 |
| SPIs | 2 |
| I2Cs | 1 |
| Vcc | 2.0V - 3.6V |
| Datasheet / Reference Manual | [Datasheet](http://www.ti.com/lit/gpn/cc430f6137) |
| Board Manual | [User Guide](http://www.ti.com/lit/pdf/slau292)|
## Flashing RIOT

4
boards/firefly/doc.txt
View File

@ -11,8 +11,8 @@ Zolertia Firefly platform
@image html "http://i.imgur.com/m2acovV.png?1" "Firefly"
The Firefly platform (Revision A) is a IoT Hardware development platform based
on TI's CC2538 system on chip (SoC), featuring an ARM Cortex-M3 with 512KB
flash, 32Kb RAM, double RF interface (Sub-1GHz CC1200 RF transceiver), and the
on TI's CC2538 system on chip (SoC), featuring an ARM Cortex-M3 with 512KiB
flash, 32KiB RAM, double RF interface (Sub-1GHz CC1200 RF transceiver), and the
following goodies:
- ISM 2.4-GHz IEEE 802.15.4 & Zigbee compliant.

38
boards/fox/doc.txt
View File

@ -5,28 +5,28 @@
## Components
| MCU | [ST2M32F103REY](http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1031/LN1565/PF164485) – 32-bits|
|-------|-----------------------------------------------------------------------------------------------------|
| RAM | 64Kb |
| Flash | 512Kb |
| radio chipset | [AT86RF231](http://www.atmel.com/images/doc8111.pdf) |
| | a IEEE802.15.4-compliant radio at 2.4 GHz |
| MCU | [ST2M32F103REY](http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1031/LN1565/PF164485) – 32-bits |
|:------------- |:------------------------------------------------------------------------------------------------- |
| RAM | 64KiB |
| Flash | 512KiB |
| radio chipset | [AT86RF231](http://www.atmel.com/images/doc8111.pdf) |
| | a IEEE802.15.4-compliant radio at 2.4 GHz |
## Implementation Status
| Device | ID | Supported | Comments |
|:------------- |:------------- |:------------- |:------------- |
| MCU | [STM23F103REY](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/reference_manual/CD00171190.pdf) | partly | Energy saving modes not fully utilized |
| Low-level driver | GPIO | yes | |
| | PWM | no | |
| | UART | full | |
| | I2C | yes | |
| | SPI | yes | one SPI device for now |
| | USB | no | |
| | RTT | yes | in progress |
| | RNG | no | no HW module |
| | Timer | full | |
| Radio Chip | AT86RF231 | partly | will be remodelled soon |
| Device | ID | Supported | Comments |
|:----------------- |:------------- |:----------|:------------------------- |
| MCU | [STM23F103REY](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/reference_manual/CD00171190.pdf) | partly | Energy saving modes not fully utilized |
| Low-level driver | GPIO | yes | |
| | PWM | no | |
| | UART | full | |
| | I2C | yes | |
| | SPI | yes | one SPI device for now |
| | USB | no | |
| | RTT | yes | in progress |
| | RNG | no | no HW module |
| | Timer | full | |
| Radio Chip | AT86RF231 | partly | will be remodelled soon |
##### Note on at86rf231 radio driver

38
boards/frdm-k64f/doc.txt
View File

@ -10,25 +10,25 @@ The board has a K64F Kinetis MCU and is supported by `cpu/kinetis_common`.
![frdm-k64f](https://www.nxp.com/assets/images/en/dev-board-image/BOARD-FRDM-K64F-PRODUCT-SHOT.png)
| MCU | MK64FN1M0VLL12 |
|:------------- |:--------------------- |
| Family | ARM Cortex-M4F |
| Vendor | Freescale |
| RAM | 256Kb |
| Flash | 1024Kb |
| Frequency | 120MHz |
| FPU | yes |
| Timers | yes |
| ADCs | yes |
| UARTs | yes |
| SPIs | yes |
| I2Cs | yes |
| Ethernet | WIP |
| USB | WIP |
| LPM | TODO |
| DAC | TODO |
| Vcc | TODO |
| Reference Manual | TODO |
| MCU | MK64FN1M0VLL12 |
|:----------------- |:--------------------- |
| Family | ARM Cortex-M4F |
| Vendor | Freescale |
| RAM | 256KiB |
| Flash | 1024KiB |
| Frequency | 120MHz |
| FPU | yes |
| Timers | yes |
| ADCs | yes |
| UARTs | yes |
| SPIs | yes |
| I2Cs | yes |
| Ethernet | WIP |
| USB | WIP |
| LPM | TODO |
| DAC | TODO |
| Vcc | TODO |
| Reference Manual | TODO |
The board has an integrated debugger adapter (k20dx128) with the firmware from
ARMmbed.

4
boards/ikea-tradfri/doc.txt
View File

@ -18,8 +18,8 @@ More information about the module can be found on this
| Family | ARM Cortex-M4F |
| Vendor | Silicon Labs |
| Vendor Family | EFR32 Mighty Gecko 1P |
| RAM | 32.0KB (1.0KB reserved) |
| Flash | 256.0KB |
| RAM | 32.0KiB (1.0KiB reserved) |
| Flash | 256.0KiB |
| EEPROM | no |
| Frequency | up to 38.4 MHz |
| FPU | yes |

38
boards/im880b/doc.txt
View File

@ -9,24 +9,24 @@
### MCU
| MCU | stm32l151cb-a |
|:------------- |:--------------------- |
| Family | ARM Cortex-M3 |
| Vendor | ST Microelectronics |
| RAM | 16Kb |
| Flash | 128Kb |
| Frequency | 32MHz (no external oscilator connected) |
| FPU | no |
| Timers | 10 (8x 16-bit, 2x watchdog timers) |
| ADCs | 1x 24-channel 12-bit |
| UARTs | 3 |
| SPIs | 2 |
| I2Cs | 2 |
| Vcc | 1.65V - 3.6V |
| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32l151cb-a.pdf) |
| Reference Manual | [Reference Manual](https://www.st.com/content/ccc/resource/technical/document/reference_manual/cc/f9/93/b2/f0/82/42/57/CD00240193.pdf/files/CD00240193.pdf/jcr:content/translations/en.CD00240193.pdf) |
| Programming Manual | [Programming Manual](https://www.st.com/content/ccc/resource/technical/document/programming_manual/5b/ca/8d/83/56/7f/40/08/CD00228163.pdf/files/CD00228163.pdf/jcr:content/translations/en.CD00228163.pdf) |
| Board Manual | [Board Manual](https://cdn.sos.sk/productdata/29/eb/a68245ed/im880b-l-lorawan.pdf)|
| MCU | stm32l151cb-a |
|:--------------------- |:----------------------------------------- |
| Family | ARM Cortex-M3 |
| Vendor | ST Microelectronics |
| RAM | 16KiB |
| Flash | 128KiB |
| Frequency | 32MHz (no external oscillator connected) |
| FPU | no |
| Timers | 10 (8x 16-bit, 2x watchdog timers) |
| ADCs | 1x 24-channel 12-bit |
| UARTs | 3 |
| SPIs | 2 |
| I2Cs | 2 |
| Vcc | 1.65V - 3.6V |
| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32l151cb-a.pdf) |
| Reference Manual | [Reference Manual](https://www.st.com/content/ccc/resource/technical/document/reference_manual/cc/f9/93/b2/f0/82/42/57/CD00240193.pdf/files/CD00240193.pdf/jcr:content/translations/en.CD00240193.pdf) |
| Programming Manual | [Programming Manual](https://www.st.com/content/ccc/resource/technical/document/programming_manual/5b/ca/8d/83/56/7f/40/08/CD00228163.pdf/files/CD00228163.pdf/jcr:content/translations/en.CD00228163.pdf) |
| Board Manual | [Board Manual](https://cdn.sos.sk/productdata/29/eb/a68245ed/im880b-l-lorawan.pdf)|
### User Interface
@ -70,4 +70,4 @@ BOARD=im880b make term
## SX1272 radio
Please note that the board has a Semtech SX1272 radio. This means that when the
semtech-loramac package or the sx127x driver are used the correct driver version
(sx1272) must be selected.
(sx1272) must be selected.

54
boards/iotlab-m3/doc.txt
View File

@ -5,16 +5,16 @@
## Components
| MCU | [ST2M32F103REY](http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1031/LN1565/PF164485) – 32-bits, 64kB RAM |
|-------|-------------------------------------------------------------------------------------------------------------------|
|sensors | Light ([ISL29020](https://www.renesas.com/kr/en/products/sensors/ambient-light-sensors/light-to-digital-sensors/device/ISL29020.html)) |
| | Pressure ([LPS331AP](http://www.st.com/web/catalog/sense_power/FM89/SC1316/PF251601)) |
| | Tri-axis accelerometer/magnetometer ([LSM303DLHC](http://www.st.com/web/catalog/sense_power/FM89/SC1449/PF251940)) |
| | Tri-axis gyrometer ([L3G4200D](http://www.st.com/web/catalog/sense_power/FM89/SC1288/PF250373)) |
| external memory | 128 Mbits external Nor flash ([N25Q128A13E1240F](https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_128mb_3v_65nm.pdf)) |
| power | 3,7V LiPo battery – 650 mAh ([063040](http://www.gmbattery.com/Datasheet/LIPO/LIPO-063040.pdf)) |
| radio chipset | [AT86RF231](http://www.atmel.com/images/doc8111.pdf) |
| | a IEEE802.15.4-compliant radio at 2.4 GHz |
| MCU | [ST2M32F103REY](http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1031/LN1565/PF164485) – 32-bits, 64KiB RAM |
|:----------------- |:----------------------------------------------------------------------------------------------------------------------------------------- |
|sensors | Light ([ISL29020](https://www.renesas.com/kr/en/products/sensors/ambient-light-sensors/light-to-digital-sensors/device/ISL29020.html)) |
| | Pressure ([LPS331AP](http://www.st.com/web/catalog/sense_power/FM89/SC1316/PF251601)) |
| | Tri-axis accelerometer/magnetometer ([LSM303DLHC](http://www.st.com/web/catalog/sense_power/FM89/SC1449/PF251940)) |
| | Tri-axis gyrometer ([L3G4200D](http://www.st.com/web/catalog/sense_power/FM89/SC1288/PF250373)) |
| external memory | 128 Mbits external Nor flash ([N25Q128A13E1240F](https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_128mb_3v_65nm.pdf)) |
| power | 3,7V LiPo battery – 650 mAh ([063040](http://www.gmbattery.com/Datasheet/LIPO/LIPO-063040.pdf)) |
| radio chipset | [AT86RF231](http://www.atmel.com/images/doc8111.pdf) |
| | a IEEE802.15.4-compliant radio at 2.4 GHz |
## Board HW overview
@ -31,23 +31,23 @@
## Implementation Status
| Device | ID | Supported | Comments |
|:------------- |:------------- |:------------- |:------------- |
| MCU | [STM23F103REY](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/reference_manual/CD00171190.pdf) | partly | Energy saving modes not fully utilized |
| Low-level driver | GPIO | yes | |
| | PWM | no | #4227|
| | UART | yes | |
| | I2C | yes | |
| | SPI | yes | |
| | USB | no | |
| | RTT | yes | |
| | Timer | yes | |
| Radio Chip | AT86RF231 | yes | |
| Accelerometer | L3G4200D | yes | |
| Magnetometer | L3G4200D | yes | |
| Gyroscope | LSM303DLHC | yes | |
| Pressure Sensor | LPS331AP | yes | |
| Light Sensor | ISL29020 | yes | |
| Device | ID | Supported | Comments |
|:----------------- |:------------- |:------------- |:--------------------- |
| MCU | [STM23F103REY](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/reference_manual/CD00171190.pdf) | partly | Energy saving modes not fully utilized |
| Low-level driver | GPIO | yes | |
| | PWM | no | periph config missing |
| | UART | yes | |
| | I2C | yes | |
| | SPI | yes | |
| | USB | no | |
| | RTT | yes | |
| | Timer | yes | |
| Radio Chip | AT86RF231 | yes | |
| Accelerometer | L3G4200D | yes | |
| Magnetometer | L3G4200D | yes | |
| Gyroscope | LSM303DLHC | yes | |
| Pressure Sensor | LPS331AP | yes | |
| Light Sensor | ISL29020 | yes | |
## Toolchains

74
boards/limifrog-v1/doc.txt
View File

@ -16,32 +16,32 @@ features a variety of sensors as well as an OLED Display and a BLE
![limifrog-v1 pinout](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/limifrog-v1_pinout.png)
### MCU
| MCU | STM32L151RC |
|:------------- |:--------------------- |
| Family | ARM Cortex-M3 |
| Vendor | ST Microelectronics |
| RAM | 32Kb |
| Flash | 256Kb |
| Frequency | 32MHz (no external oscilator connected) |
| FPU | no |
| Timers | 8 (8x 16-bit, 1x 32-bit [TIM5]) |
| ADCs | 1x 42-channel 12-bit |
| UARTs | 3 |
| SPIs | 2 |
| I2Cs | 2 |
| Vcc | 1.65V - 3.6V |
| Datasheet | [Datasheet](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00048356.pdf) |
| Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/CD00240193.pdf) |
| Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/CD00228163.pdf) |
| MCU | STM32L151RC |
|:--------------------- |:----------------------------------------- |
| Family | ARM Cortex-M3 |
| Vendor | ST Microelectronics |
| RAM | 32KiB |
| Flash | 256KiB |
| Frequency | 32MHz (no external oscillator connected) |
| FPU | no |
| Timers | 8 (8x 16-bit, 1x 32-bit [TIM5]) |
| ADCs | 1x 42-channel 12-bit |
| UARTs | 3 |
| SPIs | 2 |
| I2Cs | 2 |
| Vcc | 1.65V - 3.6V |
| Datasheet | [Datasheet](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00048356.pdf) |
| Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/CD00240193.pdf) |
| Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/CD00228163.pdf) |
## User Inferface
2 Buttons:
| PIN |
|:----- |
| PIN |
|:--------- |
| PA15 (IN) |
| PC8 (IN) |
| PC8 (IN) |
1 LED:
@ -52,23 +52,23 @@ features a variety of sensors as well as an OLED Display and a BLE
## Implementation Status
| Device | ID | Supported | Comments |
|:------------- |:------------- |:------------- |:------------- |
| MCU | STM32L151RC | partly | Energy saving modes not fully utilized |
| Low-level driver | GPIO | yes | |
| | PWM | yes | |
| | UART | yes | |
| | I2C | yes | |
| | SPI | yes | |
| | Timer | yes | |
| Ambient Light Sensor| ST VL6180X | no | planned|
| Accelerometer | ST LSM6DS3 | no | planned |
| Magnetometer | ST LIS3MDL | no | planned |
| Gyroscope | ST LSM6DS3 | no | planned |
| atmospheric pressure (and altitude) sensor | ST SLPS25H | no | planned |
| Microphone | Knowles SPU0414HR5H-SB | no | planned |
| OLED Display | Densitron DD-160128FC-1A | no | planned |
| BLE | Panasonic PAN1740 | no | planned |
| Device | ID | Supported | Comments |
|:--------------------------------------------- |:------------------------- |:--------- |:----------------------------------------- |
| MCU | STM32L151RC | partly | Energy saving modes not fully utilized |
| Low-level driver | GPIO | yes | |
| | PWM | yes | |
| | UART | yes | |
| | I2C | yes | |
| | SPI | yes | |
| | Timer | yes | |
| Ambient Light Sensor | ST VL6180X | no | planned |
| Accelerometer | ST LSM6DS3 | no | planned |
| Magnetometer | ST LIS3MDL | no | planned |
| Gyroscope | ST LSM6DS3 | no | planned |
| atmospheric pressure (and altitude) sensor | ST SLPS25H | no | planned |
| Microphone | Knowles SPU0414HR5H-SB | no | planned |
| OLED Display | Densitron DD-160128FC-1A | no | planned |
| BLE | Panasonic PAN1740 | no | planned |
## Flashing and Debugging the device

38
boards/lobaro-lorabox/doc.txt
View File

@ -9,24 +9,24 @@
### MCU
| MCU | stm32l151cb-a |
|:------------- |:--------------------- |
| Family | ARM Cortex-M3 |
| Vendor | ST Microelectronics |
| RAM | 16Kb |
| Flash | 128Kb |
| Frequency | 32MHz (no external oscilator connected) |
| FPU | no |
| Timers | 10 (8x 16-bit, 2x watchdog timers) |
| ADCs | 1x 24-channel 12-bit |
| UARTs | 3 |
| SPIs | 2 |
| I2Cs | 2 |
| Vcc | 1.65V - 3.6V |
| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32l151cb-a.pdf) |
| Reference Manual | [Reference Manual](https://www.st.com/content/ccc/resource/technical/document/reference_manual/cc/f9/93/b2/f0/82/42/57/CD00240193.pdf/files/CD00240193.pdf/jcr:content/translations/en.CD00240193.pdf) |
| Programming Manual | [Programming Manual](https://www.st.com/content/ccc/resource/technical/document/programming_manual/5b/ca/8d/83/56/7f/40/08/CD00228163.pdf/files/CD00228163.pdf/jcr:content/translations/en.CD00228163.pdf) |
| Board Manual | [Board Manual](https://www.lobaro.com/download/7250/)|
| MCU | stm32l151cb-a |
|:--------------------- |:----------------------------------------- |
| Family | ARM Cortex-M3 |
| Vendor | ST Microelectronics |
| RAM | 16KiB |
| Flash | 128KiB |
| Frequency | 32MHz (no external oscillator connected) |
| FPU | no |
| Timers | 10 (8x 16-bit, 2x watchdog timers) |
| ADCs | 1x 24-channel 12-bit |
| UARTs | 3 |
| SPIs | 2 |
| I2Cs | 2 |
| Vcc | 1.65V - 3.6V |
| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32l151cb-a.pdf) |
| Reference Manual | [Reference Manual](https://www.st.com/content/ccc/resource/technical/document/reference_manual/cc/f9/93/b2/f0/82/42/57/CD00240193.pdf/files/CD00240193.pdf/jcr:content/translations/en.CD00240193.pdf) |
| Programming Manual | [Programming Manual](https://www.st.com/content/ccc/resource/technical/document/programming_manual/5b/ca/8d/83/56/7f/40/08/CD00228163.pdf/files/CD00228163.pdf/jcr:content/translations/en.CD00228163.pdf) |
| Board Manual | [Board Manual](https://www.lobaro.com/download/7250/)|
### User Interface
@ -88,4 +88,4 @@ bridge seems to invert this lines.
## SX1272 radio
Please note that the board has a Semtech SX1272 radio. This means that when the
semtech-loramac package or the sx127x driver are used the correct driver version
(sx1272) must be selected.
(sx1272) must be selected.

36
boards/mbed_lpc1768/doc.txt
View File

@ -21,24 +21,24 @@ about the board.
### MCU
| MCU | LPC1768FDB100 |
|:--------------- |:-------------- |
| Family | ARM Cortex-M3 |
| Vendor | NXP |
| RAM | 64kB SRAM |
| Flash | 512kB |
| Frequency | up to 100MHz |
| Timers | 4 |
| UARTs | 4 |
| SPIs | 2 |
| I2Cs | 3 |
| CAN | 2 |
| PWM | 6 |
| USB Host/Device | 1 |
| Ethernet | 1 |
| RTC | 1 |
| ADC | 8 (all 12-bit) |
| Vcc | 2.4V - 3.6V |
| MCU | LPC1768FDB100 |
|:--------------- |:--------------- |
| Family | ARM Cortex-M3 |
| Vendor | NXP |
| RAM | 64KiB SRAM |
| Flash | 512KiB |
| Frequency | up to 100MHz |
| Timers | 4 |
| UARTs | 4 |
| SPIs | 2 |
| I2Cs | 3 |
| CAN | 2 |
| PWM | 6 |
| USB Host/Device | 1 |
| Ethernet | 1 |
| RTC | 1 |
| ADC | 8 (all 12-bit) |
| Vcc | 2.4V - 3.6V |
| Datasheet | [Datasheet](http://www.nxp.com/documents/data_sheet/LPC1769_68_67_66_65_64_63.pdf) |
| User Manual | [User Manual](http://www.nxp.com/documents/user_manual/UM10360.pdf)|

4
boards/mcb2388/doc.txt
View File

@ -11,8 +11,8 @@
| MCU: | LPC2388 ARM7-TDMI |
|-----------|-------------------|
| RAM: | 96kb |
| Flash: | 512kb |
| RAM: | 96KiB |
| Flash: | 512KiB |
# More info

32
boards/microbit/doc.txt
View File

@ -9,7 +9,7 @@ The [micro:bit](https://www.microbit.co.uk/) was designed by the BBC and
released in 2015. The boards was distributed to all 11-12 year old children
throughout the UK.
The board is based on the Nordic nRF51822 SoC, featuring 16Kb of RAM, 256Kb
The board is based on the Nordic nRF51822 SoC, featuring 16KiB of RAM, 256KiB
of ROM, and a 2.4GHz radio, that supports Bluetooth Low Energy (BLE) as well as
a Nordic proprietary radio mode.
@ -21,21 +21,21 @@ Additionally the boards features 2 buttons, a 5x5 LED matrix, a MAG3110
![micro:bit](https://github.com/RIOT-OS/RIOT/wiki/images/board_microbit.png)
| MCU | NRF51822QFAA |
|:------------- |:--------------------- |
| Family | ARM Cortex-M0 |
| Vendor | Nordic Semiconductor |
| RAM | 16Kb |
| Flash | 256Kb |
| Frequency | 16MHz |
| FPU | no |
| Timers | 3 (2x 16-bit, 1x 32-bit [TIMER0]) |
| ADCs | 1x 10-bit (8 channels) |
| UARTs | 1 |
| SPIs | 2 |
| I2Cs | 2 |
| Vcc | 1.8V - 3.6V |
| Reference Manual | [Reference Manual](http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf) |
| MCU | NRF51822QFAA |
|:----------------- |:--------------------------------- |
| Family | ARM Cortex-M0 |
| Vendor | Nordic Semiconductor |
| RAM | 16KiB |
| Flash | 256KiB |
| Frequency | 16MHz |
| FPU | no |
| Timers | 3 (2x 16-bit, 1x 32-bit [TIMER0]) |
| ADCs | 1x 10-bit (8 channels) |
| UARTs | 1 |
| SPIs | 2 |
| I2Cs | 2 |
| Vcc | 1.8V - 3.6V |
| Reference Manual | [Reference Manual](http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf) |
## Flashing and Debugging

56
boards/msb-430h/doc.txt
View File

@ -8,37 +8,37 @@
![ScatterWeb MSB-430H](http://riot-os.org/images/msb-430h_2.png)
## MCU
| MCU | TI MSP430F1612 |
|:------------- |:--------------------- |
| Family | MSP430 |
| Vendor | Texas Instruments |
| Package | 64 QFN |
| RAM | 5Kb |
| Flash | 55Kb |
| Frequency | 8MHz |
| FPU | no |
| Timers | 2 (2x 16bit) |
| ADCs | 1x 8 channel 12-bit |
| UARTs | 2 |
| SPIs | 2 |
| I2Cs | 1 |
| Vcc | 2.0V - 3.6V |
| Datasheet / Reference Manual | [Datasheet](https://www.mi.fu-berlin.de/inf/groups/ag-tech/projects/ScatterWeb/moduleComponents/msp430f1612.pdf) |
| User Guide | [User Guide](https://www.mi.fu-berlin.de/inf/groups/ag-tech/projects/ScatterWeb/moduleComponents/MSP430slau049f.pdf)|
| MCU | TI MSP430F1612 |
|:----------------------------- |:--------------------- |
| Family | MSP430 |
| Vendor | Texas Instruments |
| Package | 64 QFN |
| RAM | 5KiB |
| Flash | 55KiB |
| Frequency | 8MHz |
| FPU | no |
| Timers | 2 (2x 16bit) |
| ADCs | 1x 8 channel 12-bit |
| UARTs | 2 |
| SPIs | 2 |
| I2Cs | 1 |
| Vcc | 2.0V - 3.6V |
| Datasheet / Reference Manual | [Datasheet](https://www.mi.fu-berlin.de/inf/groups/ag-tech/projects/ScatterWeb/moduleComponents/msp430f1612.pdf) |
| User Guide | [User Guide](https://www.mi.fu-berlin.de/inf/groups/ag-tech/projects/ScatterWeb/moduleComponents/MSP430slau049f.pdf)|
## Radio
| RF Chip | Texas Instruments® CC1100 |
|:-------------------- |:------------------------- |
| Frequency Band | 300-348MHz, 400-464 MHz, and 800-928 MHz |
| Standard compliance | DASH7 compliant |
| Receive Sensitivity | -94dBm typ |
| Transfer Rate | 500kBaud |
| RF Power | -30dBm ~ 10dBm |
| Current Draw | RX: 14.4mA TX: 16.9mA Sleep mode: 400nA |
| RF Power Supply | 2.1V ~ 3.6V |
| Antenna | Dipole Antenna / PCB Antenna |
| Datasheet | [Datasheet](http://www.ti.com/lit/gpn/cc1100) |
| RF Chip | Texas Instruments® CC1100 |
|:--------------------- |:--------------------------------------------- |
| Frequency Band | 300-348MHz, 400-464 MHz, and 800-928 MHz |
| Standard compliance | DASH7 compliant |
| Receive Sensitivity | -94dBm typ |
| Transfer Rate | 500kBaud |
| RF Power | -30dBm ~ 10dBm |
| Current Draw | RX: 14.4mA TX: 16.9mA Sleep mode: 400nA |
| RF Power Supply | 2.1V ~ 3.6V |
| Antenna | Dipole Antenna / PCB Antenna |
| Datasheet | [Datasheet](http://www.ti.com/lit/gpn/cc1100) |
## Flashing RIOT

4
boards/msba2/doc.txt
View File

@ -12,8 +12,8 @@
| MCU: | LPC2387 ARM7-TDMI |
|-----------|-------------------|
| RAM: | 96kb |
| Flash: | 512kb |
| RAM: | 96KiB |
| Flash: | 512KiB |
# More info

50
boards/mulle/doc.txt
View File

@ -21,14 +21,14 @@ Use `BOARD=mulle` for building RIOT for this platform.
https://github.com/eistec/mulle/wiki/Datasheets contains a list of relevant
documentation for the components.
| MCU | MK60DN512VLL10 – Cortex-M4 |
|-------|-----------------------------------|
| RAM | 64kB |
| Flash | 512kB|
| radio chipset | AT86RF212B, sub-GHz IEEE802.15.4 transceiver, similar to the AT86RF233 |
| external flash memory | Micron M25P16 16 Mbits external NOR flash, used for storing configuration, measurements and other slow changing non-volatile data |
| external FRAM memory | Cypress/Ramtron FM25L04B 4 Kbits external F-RAM, used for storing counters and other rapidly changing non-volatile data |
| accelerometer | ST micro LIS3DH MEMS accelerometer, |
| MCU | MK60DN512VLL10 – Cortex-M4 |
|:--------------------- |:--------------------------------------------------------------------------------------------------------------------------------- |
| RAM | 64KiB |
| Flash | 512KiB |
| radio chipset | AT86RF212B, sub-GHz IEEE802.15.4 transceiver, similar to the AT86RF233 |
| external flash memory | Micron M25P16 2 MiB external NOR flash, used for storing configuration, measurements and other slow changing non-volatile data |
| external FRAM memory | Cypress/Ramtron FM25L04B 512B external F-RAM, used for storing counters and other rapidly changing non-volatile data |
| accelerometer | ST micro LIS3DH MEMS accelerometer |
## Layout
@ -40,23 +40,23 @@ documentation for the components.
The Mulle board is supported by mainline RIOT. See the below table for
software support status for the different components.
| Device | ID | Supported | Comments |
|:------------- |:------------- |:------------- |:------------- |
| MCU | MK60DN512VLL10 | partly | See below |
| Low-level driver | GPIO | yes | |
| | PWM | yes | |
| | UART | yes | |
| | I2C | yes | |
| | SPI | yes |Master mode works, slave mode unsupported |
| | USB | no | [PR#3890](https://github.com/RIOT-OS/RIOT/pull/3890) |
| | RTT | yes | |
| | RNG | yes | |
| | timer | yes | uses LPTMR module for TIMER_0 (used by xtimer), 32.768 kHz tick rate. PIT for additional timers, F_BUS tick rate (48 MHz default) |
| | PM/LLWU | in progress | [PR#2605](https://github.com/RIOT-OS/RIOT/pull/2605) |
| Radio Chip | AT86RF212B | yes | |
| Accelerometer | LIS3DH | yes | |
| Flash | M25P16 | in progress | [PR#6762](https://github.com/RIOT-OS/RIOT/pull/6762) |
| FRAM | FM25L04B | yes | |
| Device | ID | Supported | Comments |
|:----------------- |:----------------- |:------------- |:----------------------------------------------------- |
| MCU | MK60DN512VLL10 | partly | See below |
| Low-level driver | GPIO | yes | |
| | PWM | yes | |
| | UART | yes | |
| | I2C | yes | |
| | SPI | yes | Slave mode unsupported |
| | USB | no | [PR#3890](https://github.com/RIOT-OS/RIOT/pull/3890) |
| | RTT | yes | |
| | RNG | yes | |
| | timer | yes | uses LPTMR module for TIMER_0 (used by xtimer), 32.768 kHz tick rate. PIT for additional timers, F_BUS tick rate (48 MHz default) |
| | PM/LLWU | in progress | [PR#2605](https://github.com/RIOT-OS/RIOT/pull/2605) |
| Radio Chip | AT86RF212B | yes | |
| Accelerometer | LIS3DH | yes | |
| Flash | M25P16 | yes | |
| FRAM | FM25L04B | yes | |
## Toolchains

36
boards/nrf51dongle/doc.txt
View File

@ -6,7 +6,7 @@
## Overview:
The nRF51822 is a multi-protocol SoC ideally suited for Bluetooth® low energy
and 2.4GHz ultra low-power wireless applications from Nordic Semiconductor. The
nRF51822 is built around a 32-bit ARM® Cortex™ M0 CPU with 256kB flash + 16kB
nRF51822 is built around a 32-bit ARM® Cortex™ M0 CPU with 256KiB flash + 16KiB
RAM. The embedded 2.4GHz transceiver supports Bluetooth low energy as well as
2.4GHz operation.
@ -21,23 +21,23 @@ have to be flashed/debugged using the (included) external J-Link device.
![Nordic Semiconductor nrF51822 Development Kit]
(https://www.nordicsemi.com/-/media/Images/Products/DevKits/nRF51-Series/nRF51-Dongle-promo.png)
| MCU | NRF51822QFAA |
|:------------- |:--------------------- |
| Family | ARM Cortex-M0 |
| Vendor | Nordic Semiconductor |
| RAM | 16Kb |
| Flash | 256Kb |
| Frequency | 16MHz |
| FPU | no |
| Timers | 3 (2x 16-bit, 1x 32-bit [TIMER0]) |
| ADCs | 1x 10-bit (8 channels) |
| UARTs | 1 |
| SPIs | 2 |
| I2Cs | 2 |
| Radio | 2.4GHz BLE compatiple, +4dBm to -20 dBm output, -93 dBm RX sensitivity |
| Vcc | 1.8V - 3.6V |
| Datasheet | [Datasheet](https://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.3.pdf) |
| Reference Manual | [Reference Manual](https://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.1.pdf) |
| MCU | NRF51822QFAA |
|:----------------- |:----------------------------------------------------------------------------- |
| Family | ARM Cortex-M0 |
| Vendor | Nordic Semiconductor |
| RAM | 16KiB |
| Flash | 256KiB |
| Frequency | 16MHz |
| FPU | no |
| Timers | 3 (2x 16-bit, 1x 32-bit [TIMER0]) |
| ADCs | 1x 10-bit (8 channels) |
| UARTs | 1 |
| SPIs | 2 |
| I2Cs | 2 |
| Radio | 2.4GHz BLE compatiple, +4dBm to -20 dBm output, -93 dBm RX sensitivity |
| Vcc | 1.8V - 3.6V |
| Datasheet | [Datasheet](https://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.3.pdf) |
| Reference Manual | [Reference Manual](https://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.1.pdf) |
## Flashing the Device:

44
boards/nrf52dk/doc.txt
View File

@ -10,8 +10,8 @@ KEY), two LED’s (Pin 30, 31), a voltage regulator and a current messurment shu
on board. A serial connection and flashing must be provided by external
Hardware.
The nRF52832 is a SoC with a 32-bit ARM® Cortex™-M4F CPU with 512kB Flash and
64kB RAM. The embedded 2.4GHz transceiver supports Bluetooth low energy, ANT and
The nRF52832 is a SoC with a 32-bit ARM® Cortex™-M4F CPU with 512KiB Flash and
64KiB RAM. The embedded 2.4GHz transceiver supports Bluetooth low energy, ANT and
proprietary 2.4 GHz protocol stack. It is on air compatible with the nRF51
Series, nRF24L and nRF24AP Series products from Nordic Semiconductor.
@ -19,26 +19,26 @@ Series, nRF24L and nRF24AP Series products from Nordic Semiconductor.
![nRF52 minimal development
board](https://github.com/d00616/temp/raw/master/nrf52-minidev.jpg)
| MCU | NRF52832 |
|:------------- |:--------------------- |
| Family | ARM Cortex-M4F |
| Vendor | Nordic Semiconductor |
| RAM | 64Kb |
| Flash | 512Kb |
| Frequency | 64MHz |
| FPU | yes |
| Timers | 5 (32-bit) |
| RTC | 3 |
| ADCs | 1x 12-bit (8 channels) |
| UARTs | 1 |
| SPIs | 3 |
| I2Cs | 2 |
| I2S | 1 |
| PWM | 3*4 Channels |
| Radio | 2.4GHz BLE compatiple, -20 dBm to +4 dBm output, -96 dBm RX sensitivity |
| Vcc | 1.7V - 3.6V |
| Datasheet | [Datasheet](https://www.nordicsemi.com/eng/Products/Bluetooth-low-energy/nRF52832) |
| Reference Manual | [Reference Manual](https://infocenter.nordicsemi.com/pdf/nRF52832_PS_v1.4.pdf) |
| MCU | NRF52832 |
|:----------------- |:------------------------------------------------------------------------------------- |
| Family | ARM Cortex-M4F |
| Vendor | Nordic Semiconductor |
| RAM | 64KiB |
| Flash | 512KiB |
| Frequency | 64MHz |
| FPU | yes |
| Timers | 5 (32-bit) |
| RTC | 3 |
| ADCs | 1x 12-bit (8 channels) |
| UARTs | 1 |
| SPIs | 3 |
| I2Cs | 2 |
| I2S | 1 |
| PWM | 3*4 Channels |
| Radio | 2.4GHz BLE compatiple, -20 dBm to +4 dBm output, -96 dBm RX sensitivity |
| Vcc | 1.7V - 3.6V |
| Datasheet | [Datasheet](https://www.nordicsemi.com/eng/Products/Bluetooth-low-energy/nRF52832) |
| Reference Manual | [Reference Manual](https://infocenter.nordicsemi.com/pdf/nRF52832_PS_v1.4.pdf) |
##Pin layout

30
boards/nucleo-f030r8/doc.txt
View File

@ -16,21 +16,21 @@ STM32F030R8 microcontroller with 8Kb of SRAM and 64Kb of ROM Flash.
### MCU
| MCU | STM32F030R8 |
|:---------- |:----------------- |
| Family | ARM Cortex-M0 |
| Vendor | ST Microelectronics |
| RAM | 8Kb |
| Flash | 64Kb |
| Frequency | up to 48MHz |
| FPU | no |
| Timers | 10 (2x watchdog, 1 SysTick, 7x 16-bit) |
| ADCs | 1x 12-bit |
| UARTs | 2 |
| SPIs | 2 |
| I2Cs | 2 |
| RTC | 1 |
| Vcc | 2.4V - 3.6V |
| MCU | STM32F030R8 |
|:---------- |:-------------------------------------------------------------------- |
| Family | ARM Cortex-M0 |
| Vendor | ST Microelectronics |
| RAM | 8KiB |
| Flash | 64KiB |
| Frequency | up to 48MHz |
| FPU | no |
| Timers | 10 (2x watchdog, 1 SysTick, 7x 16-bit) |
| ADCs | 1x 12-bit |
| UARTs | 2 |
| SPIs | 2 |
| I2Cs | 2 |
| RTC | 1 |
| Vcc | 2.4V - 3.6V |
| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f030r8.pdf) |
| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00091010.pdf) |
| Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00051352.pdf) |

40
boards/nucleo-f070rb/doc.txt
View File

@ -16,26 +16,26 @@ STM32F070RB microcontroller with 16Kb of SRAM and 128Kb of ROM Flash.
### MCU
| MCU | STM32F070RB |
|:---------- |:--------------------- |
| Family | ARM Cortex-M0 |
| Vendor | ST Microelectronics |
| RAM | 16Kb |
| Flash | 128Kb |
| Frequency | up to 48MHz |
| FPU | no |
| Timers | 11 (2x watchdog, 1 SysTick, 8x 16-bit) |
| ADCs | 1x 12-bit (16 channels) |
| UARTs | 4 |
| SPIs | 2 |
| I2Cs | 2 |
| RTC | 1 |
| USB | 1 |
| Vcc | 2.4V - 3.6V |
| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f070rb.pdf) |
| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00091010.pdf) |
| Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00051352.pdf) |
| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf) |
| MCU | STM32F070RB |
|:--------------------- |:------------------------------------------------------------------------------------- |
| Family | ARM Cortex-M0 |
| Vendor | ST Microelectronics |
| RAM | 16KiB |
| Flash | 128KiB |
| Frequency | up to 48MHz |
| FPU | no |
| Timers | 11 (2x watchdog, 1 SysTick, 8x 16-bit) |
| ADCs | 1x 12-bit (16 channels) |
| UARTs | 4 |
| SPIs | 2 |
| I2Cs | 2 |
| RTC | 1 |
| USB | 1 |
| Vcc | 2.4V - 3.6V |
| Datasheet | [Datasheet](http://www.st.com/resource/en/datasheet/stm32f070rb.pdf) |
| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/dm00091010.pdf) |
| Programming Manual | [Programming Manual](http://www.st.com/resource/en/programming_manual/dm00051352.pdf) |
| Board Manual | [Board Manual](http://www.st.com/resource/en/user_manual/dm00105823.pdf) |