drivers/mrf24j40: model Kconfig

drivers/mrf24j40/Kconfig

@@ -4,6 +4,112 @@
 # General Public License v2.1. See the file LICENSE in the top level
 # directory for more details.
 #
+
+menuconfig MODULE_MRF24J40
+    bool
+    prompt "MRF24J40 radio" if !(MODULE_NETDEV_DEFAULT && HAVE_MRF24J40)
+    default (MODULE_NETDEV_DEFAULT && HAVE_MRF24J40)
+    depends on TEST_KCONFIG
+    depends on HAS_PERIPH_GPIO
+    depends on HAS_PERIPH_GPIO_IRQ
+    depends on HAS_PERIPH_SPI
+    select MODULE_PERIPH_GPIO
+    select MODULE_PERIPH_GPIO_IRQ
+    select MODULE_PERIPH_SPI
+    select MODULE_XTIMER
+    select MODULE_IEEE802154
+    select MODULE_NETDEV
+    select MODULE_NETDEV_IEEE802154
+
+if MODULE_MRF24J40
+
+choice MRF24J40_VARIANT
+    bool "Variant"
+    default MODULE_MRF24J40MA if HAVE_MRF24J40MA
+    default MODULE_MRF24J40MB if HAVE_MRF24J40MB
+    default MODULE_MRF24J40MC if HAVE_MRF24J40MC
+    default MODULE_MRF24J40MD if HAVE_MRF24J40MD
+    default MODULE_MRF24J40ME if HAVE_MRF24J40ME
+
+# the generic module matches this variant
+config MRF24J40
+    bool "MRF24J40"
+
+config MODULE_MRF24J40MA
+    bool "MRF24J40MA"
+
+config MODULE_MRF24J40MB
+    bool "MRF24J40MB"
+
+config MODULE_MRF24J40MC
+    bool "MRF24J40MC"
+
+config MODULE_MRF24J40MD
+    bool "MRF24J40MD"
+
+config MODULE_MRF24J40ME
+    bool "MRF24J40ME"
+
+endchoice
+
+config MRF24J40_OQPSK
+    bool "OQPSK support"
+    default y if !MRF24J40
+    select MODULE_NETDEV_IEEE802154_OQPSK
+
+config MRF24J40_USE_EXT_PA_LNA
+    bool "Enable external PA/LNA control"
+    default y
+    depends on !MODULE_MRF24J40MA
+    help
+        Increase RSSI for MRF24J40MC/MD/ME devices. No effect on MRF24J40MA.
+        For more information, please refer to section 4.2 of MRF24J40 datasheet.
+
+config MRF24J40_TEST_SPI_CONNECTION
+    bool "Enable basic self-test on init"
+    help
+        Perform a write / read to a known register on startup to detect if the
+        device is connected. Enable this if you want the boot not to hang if the
+        device is not connected / there are SPI errors.
+
+endif # MODULE_MRF24J40
+
+config HAVE_MRF24J40
+    bool
+    help
+        Indicates that a MRF24J40 radio is present.
+
+config HAVE_MRF24J40MA
+    bool
+    select HAVE_MRF24J40
+    help
+        Indicates that a MRF24J40MA radio is present.
+
+config HAVE_MRF24J40MB
+    bool
+    select HAVE_MRF24J40
+    help
+        Indicates that a MRF24J40MB radio is present.
+
+config HAVE_MRF24J40MC
+    bool
+    select HAVE_MRF24J40
+    help
+        Indicates that a MRF24J40MC radio is present.
+
+config HAVE_MRF24J40MD
+    bool
+    select HAVE_MRF24J40
+    help
+        Indicates that a MRF24J40MD radio is present.
+
+config HAVE_MRF24J40ME
+    bool
+    select HAVE_MRF24J40
+    help
+        Indicates that a MRF24J40ME radio is present.
+
+
 menuconfig KCONFIG_USEMODULE_MRF24J40
     bool "Configure MRF24J40 driver"
     depends on USEMODULE_MRF24J40