RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2025-01-17 10:52:44 +01:00
Code Releases Activity

boards: update links in doc of pba-d-01-kw2x

Browse Source
This commit is contained in:
Sebastian Meiling 2020-02-18 09:54:59 +01:00
parent a9cb3b637f
commit 867090c579
1 changed files with 12 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
boards/pba-d-01-kw2x/doc.txt
View File

@ -9,17 +9,15 @@ Designed and produced by PHYTEC Messtechnik GmbH, D-55129 Mainz.
contact@phytec.de
## Overview
The [Phytec IoT wiki](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki)
describes the phyWAVE module and the phyNODE board more
detailed. The links below will guide you directly to the corresponding chapter:
* [Overview](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/)
* [Introduction](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/Introduction)
* Hardware descriptions for the
[phyWAVE](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/phyWAVE-KW2x-Characteristics)
and the
[phyNODE](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/phyNODE-Characteristics)
* [Toolchain, build and debug Information](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/RIOT-getting-started#toolchain-summary)
* [A detailed step-by-step Guide that explains how to set up the Environment](https://github.com/PHYTEC-Messtechnik-GmbH/phynode-riot-examples/wiki/RIOT-getting-started#step-by-step-installation-guide)
The phyNODE evaluation board consists of a [phyWAVE](https://www.phytec.de/produkte/internet-of-things/phywave/)
module mounted on a common PCB with several sensor and actuator modules.
The board provides 2 USB ports. The one next to the white imprint *cmsis-dap*
is meant for development (debug and flash). The second one, next to the golden
*PHYTEC* imprint, is connected to the USB peripheral of the MCU and may be used
by a firmware (currently not supported).
The implementation status of the phyWAVE and phyNODE peripherals are listed
below. You can find links to the corresponding Pull Requests which may give you
a code reference.
@ -27,11 +25,10 @@ a code reference.
<img src="https://raw.githubusercontent.com/jremmert-phytec-iot/Pictures_Phytec_IOT/master/EvalBoard_3.png" width="800" />
phyNODE board with equipped phyWAVE-KW2x processor/radio-module.
### Details
The PCB-pieces with the mounted sensors can be separated from the evaluation
board to capture sensor values from specific spatial points.
@note The PCB-pieces with the mounted sensors can be separated from the
evaluation board to capture sensor values from specific spatial points.
### Pinout Reference
## Pinout Reference
The board features an Arduino like header connector to mount shields. The
spacing of the 4 pin rows is a bit offset, thus shields might not fit perfectly.