RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity

boards/mulle: Fix units & alignment in doc

Browse Source
This commit is contained in:
Marian Buschsieweke 2020-06-04 11:08:48 +02:00
parent ff17e63042
commit 7cfabf0142
No known key found for this signature in database
GPG Key ID: 61F64C6599B1539F
1 changed files with 25 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

50
boards/mulle/doc.txt
View File

@ -21,14 +21,14 @@ Use `BOARD=mulle` for building RIOT for this platform.
https://github.com/eistec/mulle/wiki/Datasheets contains a list of relevant
documentation for the components.
| MCU | MK60DN512VLL10 – Cortex-M4 |
|-------|-----------------------------------|
| RAM | 64kB |
| Flash | 512kB|
| radio chipset | AT86RF212B, sub-GHz IEEE802.15.4 transceiver, similar to the AT86RF233 |
| external flash memory | Micron M25P16 16 Mbits external NOR flash, used for storing configuration, measurements and other slow changing non-volatile data |
| external FRAM memory | Cypress/Ramtron FM25L04B 4 Kbits external F-RAM, used for storing counters and other rapidly changing non-volatile data |
| accelerometer | ST micro LIS3DH MEMS accelerometer, |
| MCU | MK60DN512VLL10 – Cortex-M4 |
|:--------------------- |:--------------------------------------------------------------------------------------------------------------------------------- |
| RAM | 64KiB |
| Flash | 512KiB |
| radio chipset | AT86RF212B, sub-GHz IEEE802.15.4 transceiver, similar to the AT86RF233 |
| external flash memory | Micron M25P16 2 MiB external NOR flash, used for storing configuration, measurements and other slow changing non-volatile data |
| external FRAM memory | Cypress/Ramtron FM25L04B 512B external F-RAM, used for storing counters and other rapidly changing non-volatile data |
| accelerometer | ST micro LIS3DH MEMS accelerometer |
## Layout
@ -40,23 +40,23 @@ documentation for the components.
The Mulle board is supported by mainline RIOT. See the below table for
software support status for the different components.
| Device | ID | Supported | Comments |
|:------------- |:------------- |:------------- |:------------- |
| MCU | MK60DN512VLL10 | partly | See below |
| Low-level driver | GPIO | yes | |
| | PWM | yes | |
| | UART | yes | |
| | I2C | yes | |
| | SPI | yes |Master mode works, slave mode unsupported |
| | USB | no | [PR#3890](https://github.com/RIOT-OS/RIOT/pull/3890) |
| | RTT | yes | |
| | RNG | yes | |
| | timer | yes | uses LPTMR module for TIMER_0 (used by xtimer), 32.768 kHz tick rate. PIT for additional timers, F_BUS tick rate (48 MHz default) |
| | PM/LLWU | in progress | [PR#2605](https://github.com/RIOT-OS/RIOT/pull/2605) |
| Radio Chip | AT86RF212B | yes | |
| Accelerometer | LIS3DH | yes | |
| Flash | M25P16 | in progress | [PR#6762](https://github.com/RIOT-OS/RIOT/pull/6762) |
| FRAM | FM25L04B | yes | |
| Device | ID | Supported | Comments |
|:----------------- |:----------------- |:------------- |:----------------------------------------------------- |
| MCU | MK60DN512VLL10 | partly | See below |
| Low-level driver | GPIO | yes | |
| | PWM | yes | |
| | UART | yes | |
| | I2C | yes | |
| | SPI | yes | Slave mode unsupported |
| | USB | no | [PR#3890](https://github.com/RIOT-OS/RIOT/pull/3890) |
| | RTT | yes | |
| | RNG | yes | |
| | timer | yes | uses LPTMR module for TIMER_0 (used by xtimer), 32.768 kHz tick rate. PIT for additional timers, F_BUS tick rate (48 MHz default) |
| | PM/LLWU | in progress | [PR#2605](https://github.com/RIOT-OS/RIOT/pull/2605) |
| Radio Chip | AT86RF212B | yes | |
| Accelerometer | LIS3DH | yes | |
| Flash | M25P16 | yes | |
| FRAM | FM25L04B | yes | |
## Toolchains