diff --git a/boards/nucleo-f302r8/Kconfig b/boards/nucleo-f302r8/Kconfig
index 060013119c..6b42fa4d96 100644
--- a/boards/nucleo-f302r8/Kconfig
+++ b/boards/nucleo-f302r8/Kconfig
@@ -15,6 +15,7 @@ config BOARD_NUCLEO_F302R8
     select CPU_MODEL_STM32F302R8
 
     # Put defined MCU peripherals here (in alphabetical order)
+    select HAS_PERIPH_ADC
     select HAS_PERIPH_I2C
     select HAS_PERIPH_PWM
     select HAS_PERIPH_RTC
diff --git a/boards/nucleo-f302r8/Makefile.features b/boards/nucleo-f302r8/Makefile.features
index 24c9d4bfc0..1627d7a9d2 100644
--- a/boards/nucleo-f302r8/Makefile.features
+++ b/boards/nucleo-f302r8/Makefile.features
@@ -2,6 +2,7 @@ CPU = stm32
 CPU_MODEL = stm32f302r8
 
 # Put defined MCU peripherals here (in alphabetical order)
+FEATURES_PROVIDED += periph_adc
 FEATURES_PROVIDED += periph_i2c
 FEATURES_PROVIDED += periph_pwm
 FEATURES_PROVIDED += periph_rtc
diff --git a/boards/nucleo-f302r8/include/periph_conf.h b/boards/nucleo-f302r8/include/periph_conf.h
index 034fcde657..cda93b981f 100644
--- a/boards/nucleo-f302r8/include/periph_conf.h
+++ b/boards/nucleo-f302r8/include/periph_conf.h
@@ -34,6 +34,28 @@
 extern "C" {
 #endif
 
+/**
+ * @name    ADC configuration
+ *
+ * Note that we do not configure all ADC channels,
+ * and not in the STM32F302 order.  Instead, we
+ * just define 6 ADC channels, for the Nucleo
+ * Arduino header pins A0-A5
+ *
+ * @{
+ */
+static const adc_conf_t adc_config[] = {
+    { .pin = GPIO_PIN(PORT_A, 0), .dev = 0, .chan =  1 }, /* ADC_IN1,  fast */
+    { .pin = GPIO_PIN(PORT_A, 1), .dev = 0, .chan =  2 }, /* ADC_IN2,  fast */
+    { .pin = GPIO_PIN(PORT_A, 4), .dev = 0, .chan =  5 }, /* ADC_IN5,  fast */
+    { .pin = GPIO_PIN(PORT_B, 0), .dev = 0, .chan = 11 }, /* ADC_IN11, slow */
+    { .pin = GPIO_PIN(PORT_C, 1), .dev = 0, .chan =  7 }, /* ADC_IN7,  slow */
+    { .pin = GPIO_PIN(PORT_C, 0), .dev = 0, .chan =  6 }, /* ADC_IN6,  slow */
+};
+
+#define ADC_NUMOF           ARRAY_SIZE(adc_config)
+/** @} */
+
 /**
  * @name   UART configuration
  * @{