RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity

drivers/xbee: uncrustify

Browse Source
This commit is contained in:
Francisco Molina 2021-11-02 16:58:30 +01:00
parent 472f6495a8
commit 5579fd2220
2 changed files with 150 additions and 144 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
drivers/xbee/xbee.c
View File

@ -100,6 +100,7 @@ typedef struct {
static uint8_t _cksum(size_t offset, uint8_t *buf, size_t size)
{
uint8_t res = 0xff;
for (size_t i = offset; i < size; i++) {
res -= buf[i];
}
@ -231,7 +232,7 @@ static void _rx_cb(void *arg, uint8_t c)
dev->rx_buf[dev->rx_count++] = c;
if (dev->rx_count == dev->rx_limit) {
/* packet is complete */
netdev_trigger_event_isr((netdev_t*) dev);
netdev_trigger_event_isr((netdev_t *)dev);
dev->int_state = XBEE_INT_STATE_IDLE;
}
break;
@ -426,13 +427,14 @@ static int _set_encryption(xbee_t *dev, const uint8_t *val)
{
uint8_t cmd[3];
resp_t resp;
/* get the current state of Encryption */
cmd[0] = 'E';
cmd[1] = 'E';
_api_at_cmd(dev, cmd, 2, &resp);
/* Prevent writing the same value in EE. */
if (val[0] != resp.data[0] ){
if (val[0] != resp.data[0]) {
cmd[0] = 'E';
cmd[1] = 'E';
cmd[2] = val[0];
@ -448,6 +450,7 @@ static int _set_encryption_key(xbee_t *dev, const uint8_t *val, size_t len)
{
uint8_t cmd[18];
resp_t resp;
if (len != 16) { /* the AES key is 128bit, 16 byte */
return -EINVAL;
}
@ -519,6 +522,7 @@ int xbee_build_hdr(xbee_t *dev, uint8_t *xhdr, size_t payload_len,
/* finally configure the packet size and copy the actual dst address */
uint16_t size = (uint16_t)(payload_len + addr_len + 3);
xhdr[1] = (uint8_t)(size >> 8);
xhdr[2] = (uint8_t)(size & 0xff);
memcpy(&xhdr[5], dst_addr, addr_len);
@ -598,7 +602,7 @@ int xbee_init(netdev_t *dev)
/* put XBee module in "API mode without escaped characters" */
_at_cmd(xbee, "ATAP1\r");
/* disable xbee CTS and RTS, unless hardware flow control is used */
if(!IS_USED(MODULE_PERIPH_UART_HW_FC)) {
if (!IS_USED(MODULE_PERIPH_UART_HW_FC)) {
DEBUG("[xbee] init: WARNING if using an arduino BOARD + arduino xbee " \
"shield with ICSP connector, hardware flow control can't be " \
"used since CTS pin is connected to ICSP RESET pin\n");
@ -734,6 +738,7 @@ static void xbee_isr(netdev_t *netdev)
static int xbee_get(netdev_t *ndev, netopt_t opt, void *value, size_t max_len)
{
xbee_t *dev = (xbee_t *)ndev;
assert(dev);
switch (opt) {
@ -787,6 +792,7 @@ static int xbee_get(netdev_t *ndev, netopt_t opt, void *value, size_t max_len)
static int xbee_set(netdev_t *ndev, netopt_t opt, const void *value, size_t len)
{
xbee_t *dev = (xbee_t *)ndev;
assert(dev);
switch (opt) {