diff --git a/boards/nrf52dk/doc.txt b/boards/nrf52dk/doc.txt
index 3dd95360db..459c90d48a 100644
--- a/boards/nrf52dk/doc.txt
+++ b/boards/nrf52dk/doc.txt
@@ -4,91 +4,37 @@
 @brief       Support for the nRF52 DK
 
 ## Overview:
-There are some nameless simple development Boards with an nRF52832 available.
-These boards providing access to most SoC ports. There are two buttons (RST,
-KEY), two LED’s (Pin 30, 31), a voltage regulator and a current measurement shunt
-on board. A serial connection and flashing must be provided by external
-Hardware.
 
-The nRF52832 is a SoC with a 32-bit ARM® Cortex™-M4F CPU with 512KiB Flash and
-64KiB RAM. The embedded 2.4GHz transceiver supports Bluetooth low energy, ANT and
-proprietary 2.4 GHz protocol stack. It is on air compatible with the nRF51
-Series, nRF24L and nRF24AP Series products from Nordic Semiconductor.
+The
+[nRF52 DK](https://www.nordicsemi.com/Products/Development-hardware/nRF52-DK)
+is a development board featuring the nRF52832 MCU with Arduino compatible
+pin headers and an integrated J-Link programmer, debugger and UART adapter.
 
 ## Hardware:
-![nRF52 minimal development
-board](https://github.com/d00616/temp/raw/master/nrf52-minidev.jpg)
 
-| MCU               | NRF52832                                                                              |
-|:----------------- |:------------------------------------------------------------------------------------- |
-| Family            | ARM Cortex-M4F                                                                        |
-| Vendor            | Nordic Semiconductor                                                                  |
-| RAM               | 64KiB                                                                                 |
-| Flash             | 512KiB                                                                                |
-| Frequency         | 64MHz                                                                                 |
-| FPU               | yes                                                                                   |
-| Timers            | 5 (32-bit)                                                                            |
-| RTC               | 3                                                                                     |
-| ADCs              | 1x 12-bit (8 channels)                                                                |
-| UARTs             | 1                                                                                     |
-| SPIs              | 3                                                                                     |
-| I2Cs              | 2                                                                                     |
-| I2S               | 1                                                                                     |
-| PWM               | 3*4 Channels                                                                          |
-| Radio             | 2.4GHz BLE compatiple, -20 dBm to +4 dBm output, -96 dBm RX sensitivity               |
-| Vcc               | 1.7V - 3.6V                                                                           |
-| Datasheet         | [Datasheet](https://www.nordicsemi.com/eng/Products/Bluetooth-low-energy/nRF52832)    |
-| Reference Manual  | [Reference Manual](https://infocenter.nordicsemi.com/pdf/nRF52832_PS_v1.4.pdf)        |
+![nRF52 DK](https://www.nordicsemi.com/-/media/Images/Products/DevKits/nRF52-Series/nRF52-DK/nRF52-DK/nRF52-DK-prod-page.png)
 
-##Pin layout
-
-|MCU pin|Board pin|Function|
-|:-----------|:-----------|:----------|
-|P0.0| n.c. | |
-|P0.1| n.c. | |
-|P0.2| D07 | |
-|P0.3| D08 | |
-|P0.4| D09 | KEY |
-|P0.5| D10 | |
-|P0.6| D13 | |
-|P0.7| D14 | |
-|P0.8| D15 | |
-|P0.9| n.c. | |
-|P0.10| n.c. | NFC antenna 2 (unusable) |
-|P0.11|  D18 | RXD (software defined) |
-|P0.12|  D19 | TXD (software defined) |
-|P0.13|  D20 | |
-|P0.14|  D21 | |
-|P0.15|  D22 | |
-|P0.16|  D23 | |
-|P0.17|  D24 | |
-|P0.18|  D25 | |
-|P0.19|  D26 | |
-|P0.20|  D27 | |
-|P0.21|  RST | RESET |
-|P0.22|  D28 | near Radio! -> Low drive, low frequency I/O only. |
-|P0.23|  D29 | near Radio! -> Low drive, low frequency I/O only. |
-|P0.24|  D30 | near Radio! -> Low drive, low frequency I/O only. |
-|P0.25|  D00 | near Radio! -> Low drive, low frequency I/O only. |
-|P0.26|  D01 | near Radio! -> Low drive, low frequency I/O only. |
-|P0.27|  D02 | near Radio! -> Low drive, low frequency I/O only. |
-|P0.28|  D03 | near Radio! -> Low drive, low frequency I/O only. |
-|P0.29|  D04 | near Radio! -> Low drive, low frequency I/O only. |
-|P0.30|  D05 | LED0, near Radio! -> Low drive, low frequency I/O only. |
-|P0.31|  D06 | LED1, near Radio! -> Low drive, low frequency I/O only. |
-|  |  V33 | 3.3V for MCU |
-|  |  D16 | ? |
-|  |  D17 | ? |
-|  | VBUS | 5V input |
-|  | GND |  |
-|  | RXD  | n.c. |
-|  | TXD  | n.c. |
-|  | TD0  | n.c. |
-|  | TD1  | n.c. |
-| SWDIO | TMS  |  |
-| SWCLK | TCK  |  |
-
-**Caution**: NFC is not usable with this board.
+| MCU                   | NRF52832                                                                              |
+|:--------------------- |:------------------------------------------------------------------------------------- |
+| Family                | ARM Cortex-M4F                                                                        |
+| Vendor                | Nordic Semiconductor                                                                  |
+| RAM                   | 64 KiB                                                                                |
+| Flash                 | 512 KiB                                                                               |
+| Frequency             | 64 MHz                                                                                |
+| FPU                   | yes                                                                                   |
+| Timers                | 5 (32-bit)                                                                            |
+| RTC                   | 3                                                                                     |
+| ADCs                  | 1x 12-bit (8 channels)                                                                |
+| UARTs                 | 1                                                                                     |
+| SPIs                  | 3                                                                                     |
+| I2Cs                  | 2                                                                                     |
+| I2S                   | 1                                                                                     |
+| PWM                   | 3*4 Channels                                                                          |
+| Radio                 | 2.4GHz BLE compatiple, -20 dBm to +4 dBm output, -96 dBm RX sensitivity               |
+| Vcc                   | 1.7V - 3.6V                                                                           |
+| MCU Datasheet         | [Datasheet](https://www.nordicsemi.com/eng/Products/Bluetooth-low-energy/nRF52832)    |
+| MCU Reference Manual  | [Reference Manual](https://infocenter.nordicsemi.com/pdf/nRF52832_PS_v1.4.pdf)        |
+| Board Datasheet       | [User Guide](https://infocenter.nordicsemi.com/pdf/nRF52_DK_User_Guide_v1.3.1.pdf)    |
 
 ### RESET pin configuration