diff --git a/boards/frdm-k64f/dist/openocd.cfg b/boards/frdm-k64f/dist/openocd.cfg
deleted file mode 100644
index 85d81531aa..0000000000
--- a/boards/frdm-k64f/dist/openocd.cfg
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# Freescale Kinetis k64f devices
-#
-source [find interface/cmsis-dap.cfg]
-
-#
-# k64f devices support both JTAG and SWD transports.
-#
-source [find target/swj-dp.tcl]
-
-if { [info exists CHIPNAME] } {
-    set _CHIPNAME $CHIPNAME
-} else {
-    set _CHIPNAME k64f
-}
-
-if { [info exists CPUTAPID] } {
-    set _CPUTAPID $CPUTAPID
-} else {
-    set _CPUTAPID 0x2ba01477
-}
-
-set _TARGETNAME $_CHIPNAME.cpu
-
-swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
-
-target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
-
-$_CHIPNAME.cpu configure -event examine-start { puts "START..." ; }
-
-# It is important that "kinetis mdm check_security" is called for
-# 'examine-end' event and not 'eximine-start'. Calling it in 'examine-start'
-# causes "kinetis mdm check_security" to fail the first time openocd
-# calls it when it tries to connect after the CPU has been power-cycled.
-$_CHIPNAME.cpu configure -event examine-end {
-    kinetis mdm check_security
-}
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x1000 -work-area-backup 0
-
-flash bank $_CHIPNAME.flash kinetis 0 0 0 0 $_TARGETNAME
-
-cortex_m reset_config sysresetreq
-#reset_config srst_only srst_nogate connect_assert_srst
-
-adapter_khz 1000
-
-$_TARGETNAME configure -event gdb-attach {
-  halt
-}
-$_TARGETNAME configure -rtos auto