Merge pull request #17255 from MrKevinWeiss/pr/kconfig/sam54

.murdock: Add same54-xpro to kconfig tests

.murdock

@@ -40,6 +40,7 @@ nucleo-l433rc
 nucleo-l552ze-q
 p-nucleo-wb55
 remote-revb
+same54-xpro
 samr21-xpro
 seeedstudio-gd32
 slstk3400a

boards/adafruit-itsybitsy-m4/Kconfig

@@ -22,3 +22,7 @@ config BOARD_ADAFRUIT_ITSYBITSY_M4
     select HAS_PERIPH_TIMER
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
+
+    select HAVE_MTD_SPI_NOR
+    # This specific board requires SPI_ON_QSPI for the MTD_SPI_NOR
+    select MODULE_PERIPH_SPI_ON_QSPI if MODULE_MTD_SPI_NOR

boards/avr-rss2/Makefile.dep

@@ -7,6 +7,10 @@ ifneq (,$(filter eui_provider,$(USEMODULE)))
   USEMODULE += at24mac
 endif
 
+ifneq (,$(filter mtd,$(USEMODULE)))
+  USEMODULE += mtd_at24cxxx at24mac
+endif
+
 ifneq (,$(filter saul_default,$(USEMODULE)))
   USEMODULE += bme280_i2c
   USEMODULE += saul_gpio

boards/same54-xpro/Kconfig

@@ -23,3 +23,9 @@ config BOARD_SAME54_XPRO
     select HAS_PERIPH_UART
     select HAS_PERIPH_USBDEV
     select HAS_RIOTBOOT
+
+    select HAVE_SAUL_GPIO
+    select HAVE_MTD_SPI_NOR
+    select HAVE_AT24MAC
+    # This specific board requires SPI_ON_QSPI for the MTD_SPI_NOR
+    select MODULE_PERIPH_SPI_ON_QSPI if MODULE_MTD_SPI_NOR

cpu/sam0_common/periph/Kconfig

@@ -18,7 +18,7 @@ config MODULE_SAM0_COMMON_PERIPH
 
 config MODULE_PERIPH_RTC_RTT
     bool
-    default y if MODULE_PERIPH_RTT || MODULE_PERIPH_RTC
+    default y if MODULE_PERIPH_RTT || MODULE_PERIPH_RTC || MODULE_PERIPH_GPIO_TAMPER_WAKE
 
 config MODULE_PERIPH_UART_NONBLOCKING
     depends on HAS_PERIPH_UART_NONBLOCKING

drivers/at24mac/Kconfig

@@ -10,8 +10,8 @@ comment "AT24MAC unique ID chip enabled as default EUI-48/64 provider"
 
 config MODULE_AT24MAC
     bool
-    prompt "AT24MAC unique ID chip" if !(MODULE_EUI_PROVIDER && HAVE_AT24MAC)
-    default (MODULE_EUI_PROVIDER && HAVE_AT24MAC)
+    prompt "AT24MAC unique ID chip" if !((MODULE_EUI_PROVIDER || MODULE_MTD) && HAVE_AT24MAC)
+    default ((MODULE_EUI_PROVIDER || MODULE_MTD) && HAVE_AT24MAC)
     select MODULE_AT24CXXX
     depends on HAS_PERIPH_I2C
     depends on TEST_KCONFIG

drivers/periph_common/Kconfig.gpio

@@ -29,6 +29,14 @@ config MODULE_PERIPH_GPIO_FAST_READ
         This trades an increase in power consumption for a decrease in GPIO pin
         read latency.
 
+config MODULE_PERIPH_GPIO_TAMPER_WAKE
+    bool "enable wake from Deep Sleep by RTC tamper pins"
+    depends on HAS_PERIPH_GPIO_TAMPER_WAKE
+    help
+        If you enable this, a RTC tamper pin that has been configured as an
+        interrupt can wake the CPU from Deep Sleep. Only RTC tamper pins
+        (and the RTC alarm) can wake the CPU from Deep Sleep.
+
 # TODO: this module is actually jus  t an artifact from the way periph_init_%
 # modules are handled in Makefile. We need to define it to keep the list the
 # same for now. We should be able to remove it later on.
@@ -43,6 +51,11 @@ config MODULE_PERIPH_INIT_GPIO_FAST_READ
     default y if MODULE_PERIPH_INIT
     depends on MODULE_PERIPH_GPIO_FAST_READ
 
+config MODULE_PERIPH_INIT_GPIO_TAMPER_WAKE
+    bool "Auto initialize tamper detection"
+    default y if MODULE_PERIPH_INIT
+    depends on MODULE_PERIPH_GPIO_TAMPER_WAKE
+
 endif # MODULE_PERIPH_GPIO
 
 osource "$(RIOTCPU)/$(CPU)/periph/Kconfig.gpio"

drivers/periph_common/Kconfig.spi

@@ -20,6 +20,10 @@ config MODULE_PERIPH_SPI_RECONFIGURE
     bool "Pin reconfiguration support"
     depends on HAS_PERIPH_SPI_RECONFIGURE
 
+config MODULE_PERIPH_SPI_ON_QSPI
+    bool "Use QSPI peripherial in SPI mode"
+    depends on HAS_PERIPH_SPI_ON_QSPI
+
 config MODULE_PERIPH_SPI_GPIO_MODE
     bool "Support initializing SPI pins with adapted GPIO modes"
     depends on HAS_PERIPH_SPI_GPIO_MODE

makefiles/features_modules.inc.mk

@@ -18,7 +18,8 @@ ifneq (,$(filter periph_init, $(USEMODULE)))
     periph_rtc_rtt \
     periph_clic \
     periph_coretimer \
-    periph_plic
+    periph_plic \
+    periph_spi_on_qspi
     #
   PERIPH_MODULES := $(filter-out $(PERIPH_IGNORE_MODULES),\
                                  $(filter periph_%,$(USEMODULE)))

tests/periph_gpio/Kconfig

@@ -10,4 +10,5 @@ config APPLICATION
     default y
     imply MODULE_PERIPH_GPIO_IRQ
     imply MODULE_PERIPH_GPIO_FAST_READ
+    imply MODULE_PERIPH_GPIO_TAMPER_WAKE
     depends on TEST_KCONFIG

tests/periph_spi/Kconfig

@@ -9,4 +9,5 @@ config APPLICATION
     bool
     default y
     imply MODULE_PERIPH_SPI_RECONFIGURE
+    imply MODULE_PERIPH_SPI_ON_QSPI
     depends on TEST_KCONFIG

tests/periph_spi_dma/Kconfig

@@ -9,4 +9,5 @@ config APPLICATION
     bool
     default y
     imply MODULE_PERIPH_SPI_RECONFIGURE
+    imply MODULE_PERIPH_SPI_ON_QSPI
     depends on TEST_KCONFIG