Merge pull request #20438 from MrKevinWeiss/pr/kconfig/dep/removal

Remove Kconfig dependency modelling

Kconfig

@@ -9,12 +9,6 @@ mainmenu "RIOT Configuration"
 # Load macro definitions
 rsource "kconfigs/Kconfig.consts"
 
-# Load feature declarations
-rsource "kconfigs/Kconfig.features"
-
-# Load error symbols
-rsource "kconfigs/Kconfig.errors"
-
 # For now, get used modules as macros from this file (see kconfig.mk)
 osource "$(KCONFIG_GENERATED_DEPENDENCIES)"
 
@@ -41,23 +35,5 @@ menu "External Packages"
 osource "$(KCONFIG_EXTERNAL_PKG_CONFIGS)"
 endmenu # External Packages
 
-comment "RIOT is in a migration phase."
 comment "Some configuration options may not be here. Use CFLAGS instead."
-
+comment "Ideally, make a PR to add them to the Kconfig."
-comment "!! ERROR: There are conflicting modules active !!"
-    depends on ERROR_MODULES_CONFLICT != ""
-
-config TEST_KCONFIG
-    bool
-    default y if '$(TEST_KCONFIG)' = '1'
-    help
-        This is used during the Kconfig migration to test the module dependency
-        modelling. Don't change the default value unless you know what you are
-        doing.
-
-config DEVELHELP
-    bool "Development Help"
-    help
-        Set to enable code in RIOT that does safety checking which might not be
-        needed in a production environment but helps in the development
-        process.

Makefile.base

@@ -74,11 +74,7 @@ endif
 
 ifneq (,$(SRCXX))
   ifeq (,$(filter cpp,$(USEMODULE)))
-    ifneq (1,$(TEST_KCONFIG))
+    $(error Found C++ source, but feature "cpp" is not used. Add "FEATURES_REQUIRED += cpp")
-      $(error Found C++ source, but feature "cpp" is not used. Add "FEATURES_REQUIRED += cpp")
-    else
-      $(error Found C++ source, but "cpp" module is not used. Enable the MODULE_CPP in Kconfig)
-    endif
   endif
 endif
 

Makefile.include

@@ -268,11 +268,6 @@ include $(RIOTMAKE)/scan-build.inc.mk
 
 export RIOTBUILD_CONFIG_HEADER_C = $(BINDIR)/riotbuild/riotbuild.h
 
-# When testing Kconfig's module modelling we need to run Kconfig
-ifeq (1,$(TEST_KCONFIG))
-  SHOULD_RUN_KCONFIG = 1
-endif
-
 ifeq ($(OS),Darwin)
   OPEN   := open
 else
@@ -425,40 +420,22 @@ include $(RIOTMAKE)/defaultmodules_regular.inc.mk
 # Include Kconfig functionalities
 include $(RIOTMAKE)/kconfig.mk
 
-# For testing, use TEST_KCONFIG as a switch between Makefile.dep and Kconfig
+# always select provided architecture features
-ifeq (1,$(TEST_KCONFIG))
+FEATURES_REQUIRED += $(filter arch_%,$(FEATURES_PROVIDED))
-  ifneq ($(RIOT_CI_BUILD),1)
+# always select CPU core features
-    $(info === [ATTENTION] Testing Kconfig dependency modelling ===)
+FEATURES_REQUIRED += $(filter cpu_core_%,$(FEATURES_PROVIDED))
-  endif
-  KCONFIG_MODULES := $(call lowercase,$(patsubst CONFIG_MODULE_%,%,$(filter CONFIG_MODULE_%,$(.VARIABLES))))
-  USEMODULE := $(KCONFIG_MODULES)
-  KCONFIG_PACKAGES := $(call lowercase,$(patsubst CONFIG_PACKAGE_%,%,$(filter CONFIG_PACKAGE_%,$(.VARIABLES))))
-  USEPKG := $(KCONFIG_PACKAGES)
 
-  # Locate used packages in $(RIOTPKG) or $(EXTERNAL_PKG_DIRS).
+# check if required features are provided and update $(FEATURES_USED)
-  PKGDIRS := $(RIOTPKG) $(EXTERNAL_PKG_DIRS)
+include $(RIOTMAKE)/features_check.inc.mk
-  PKG_PATHS := $(sort $(foreach dir,$(PKGDIRS),\
-    $(foreach pkg,$(USEPKG),$(dir $(wildcard $(dir)/$(pkg)/Makefile)))))
 
-  EXTERNAL_MODULE_PATHS := $(dir $(EXTERNAL_MODULE_KCONFIGS))
+# handle removal of default modules
-else
+USEMODULE += $(filter-out $(DISABLE_MODULE), $(DEFAULT_MODULE))
-  # always select provided architecture features
-  FEATURES_REQUIRED += $(filter arch_%,$(FEATURES_PROVIDED))
-  # always select CPU core features
-  FEATURES_REQUIRED += $(filter cpu_core_%,$(FEATURES_PROVIDED))
 
-  # check if required features are provided and update $(FEATURES_USED)
+# avoid recursive expansion
-  include $(RIOTMAKE)/features_check.inc.mk
+USEMODULE := $(sort $(USEMODULE))
 
-  # handle removal of default modules
+# process dependencies
-  USEMODULE += $(filter-out $(DISABLE_MODULE), $(DEFAULT_MODULE))
+include $(RIOTMAKE)/dependency_resolution.inc.mk
-
-  # avoid recursive expansion
-  USEMODULE := $(sort $(USEMODULE))
-
-  # process dependencies
-  include $(RIOTMAKE)/dependency_resolution.inc.mk
-endif
 
 # Include dfu-util configuration when using riotboot_dfu bootloader before
 # including the board's Makefile.include which could define dfu-util

boards/Kconfig

@@ -8,17 +8,3 @@ config BOARD
     string
     help
         Name of the currently selected board.
-
-config MODULE_BOARD
-    bool
-    default y
-    depends on TEST_KCONFIG
-    help
-        Module which holds all board-specific files.
-
-config MODULE_BOARD_COMMON_INIT
-    bool
-    default y
-    depends on TEST_KCONFIG
-    help
-        Common board initialization module

boards/acd52832/Kconfig

@@ -12,10 +12,5 @@ config BOARD_ACD52832
     default y
     select BOARD_COMMON_NRF52
     select CPU_MODEL_NRF52832XXAA
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO
 
 source "$(RIOTBOARD)/common/nrf52xxxdk/Kconfig"

boards/adafruit-clue/Kconfig

@@ -12,22 +12,5 @@ config BOARD_ADAFRUIT_CLUE
     default y
     select BOARD_COMMON_NRF52
     select CPU_MODEL_NRF52840XXAA
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-    select HAS_HIGHLEVEL_STDIO
-
-    select HAVE_APDS9960
-    select HAVE_BMP280_I2C
-    select HAVE_ILI9341
-    select HAVE_LIS3MDL
-    select HAVE_SAUL_GPIO
-    select HAVE_SHT3X
-
-    select MODULE_USB_BOARD_RESET if KCONFIG_USB && TEST_KCONFIG
-
-config FORCE_USB_STDIO
-    default y
 
 source "$(RIOTBOARD)/common/nrf52/Kconfig"

boards/adafruit-grand-central-m4-express/Kconfig

@@ -11,26 +11,3 @@ config BOARD_ADAFRUIT_GRAND_CENTRAL_M4_EXPRESS
     bool
     default y
     select CPU_MODEL_SAMD51P20A
-    select HAS_ARDUINO_ANALOG
-    select HAS_ARDUINO_PINS
-    select HAS_HIGHLEVEL_STDIO
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_DAC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-    select HAVE_SAUL_GPIO
-
-    select HAVE_MTD_SPI_NOR
-    # This specific board requires SPI_ON_QSPI for the MTD_SPI_NOR
-    select MODULE_PERIPH_SPI_ON_QSPI if MODULE_MTD_SPI_NOR
-
-    select HAVE_MTD_SDCARD_DEFAULT
-    select MODULE_FATFS_VFS if MODULE_VFS_DEFAULT
-
-source "$(RIOTBOARD)/common/samdx1-arduino-bootloader/Kconfig"

boards/adafruit-itsybitsy-m4/Kconfig

@@ -11,21 +11,3 @@ config BOARD_ADAFRUIT_ITSYBITSY_M4
     bool
     default y
     select CPU_MODEL_SAMD51G19A
-    select HAS_HIGHLEVEL_STDIO
-    select HAS_PERIPH_DAC
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-    select HAVE_SAUL_GPIO
-
-    select HAVE_MTD_SPI_NOR
-    # This specific board requires SPI_ON_QSPI for the MTD_SPI_NOR
-    select MODULE_PERIPH_SPI_ON_QSPI if MODULE_MTD_SPI_NOR
-
-source "$(RIOTBOARD)/common/samdx1-arduino-bootloader/Kconfig"

boards/adafruit-itsybitsy-nrf52/Kconfig

@@ -12,17 +12,5 @@ config BOARD_ADAFRUIT_ITSYBITSY_NRF52
     default y
     select BOARD_COMMON_NRF52
     select CPU_MODEL_NRF52840XXAA
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-    select HAS_HIGHLEVEL_STDIO
-
-    select HAVE_SAUL_GPIO
-
-    select MODULE_USB_BOARD_RESET if KCONFIG_USB && TEST_KCONFIG
-
-config FORCE_USB_STDIO
-    default y
 
 source "$(RIOTBOARD)/common/nrf52/Kconfig"

boards/adafruit-pybadge/Kconfig

@@ -11,22 +11,3 @@ config BOARD_ADAFRUIT_PYBADGE
     bool
     default y
     select CPU_MODEL_SAMD51J19A
-    select HAS_HIGHLEVEL_STDIO
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_DAC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-
-    select HAVE_ST7735
-    select HAVE_SAUL_GPIO
-    select HAVE_MTD_SPI_NOR
-    # This specific board requires SPI_ON_QSPI for the MTD_SPI_NOR
-    select MODULE_PERIPH_SPI_ON_QSPI if MODULE_MTD_SPI_NOR
-
-source "$(RIOTBOARD)/common/samdx1-arduino-bootloader/Kconfig"

boards/airfy-beacon/Kconfig

@@ -12,10 +12,5 @@ config BOARD_AIRFY_BEACON
     default y
     select BOARD_COMMON_NRF51
     select CPU_MODEL_NRF51X22XXAA
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-    select MODULE_BOARDS_COMMON_NRF51 if TEST_KCONFIG
 
 source "$(RIOTBOARD)/common/nrf51/Kconfig"

boards/alientek-pandora/Kconfig

@@ -13,18 +13,7 @@ config BOARD_ALIENTEK_PANDORA
     default y
     select CPU_MODEL_STM32L475VE
 
-    # Put defined MCU peripherals here (in alphabetical order)
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    # Put other features for this board (in alphabetical order)
-    select HAS_RIOTBOOT
-
     # Clock configuration
     select BOARD_HAS_LSE
 
-    select HAVE_SAUL_GPIO
-
 source "$(RIOTBOARD)/common/stm32/Kconfig"

boards/arduino-duemilanove/Kconfig

@@ -9,8 +9,6 @@ config BOARD_ARDUINO_DUEMILANOVE
     default y
     select BOARD_COMMON_ARDUINO_ATMEGA
     select CPU_MODEL_ATMEGA328P
-    select MODULE_BOARDS_COMMON_ARDUINO-ATMEGA if TEST_KCONFIG
-    select HAS_ARDUINO_SHIELD_UNO
 
 config BOARD
     default "arduino-duemilanove" if BOARD_ARDUINO_DUEMILANOVE

boards/arduino-leonardo/Kconfig

@@ -12,7 +12,5 @@ config BOARD_ARDUINO_LEONARDO
     default y
     select BOARD_COMMON_ARDUINO_ATMEGA
     select CPU_MODEL_ATMEGA32U4
-    select MODULE_BOARDS_COMMON_ARDUINO-ATMEGA if TEST_KCONFIG
-    select HAS_ARDUINO_SHIELD_UNO
 
 source "$(RIOTBOARD)/common/arduino-atmega/Kconfig"

boards/arduino-mega2560/Kconfig

@@ -12,8 +12,5 @@ config BOARD_ARDUINO_MEGA2560
     default y
     select CPU_MODEL_ATMEGA2560
     select BOARD_COMMON_ARDUINO_ATMEGA
-    select MODULE_BOARDS_COMMON_ARDUINO-ATMEGA if TEST_KCONFIG
-    select HAS_ARDUINO_SHIELD_MEGA
-    select HAS_ARDUINO_SHIELD_UNO
 
 source "$(RIOTBOARD)/common/arduino-atmega/Kconfig"

boards/arduino-mkr1000/Kconfig

@@ -11,6 +11,5 @@ config BOARD_ARDUINO_MKR1000
     bool
     default y
     select BOARD_COMMON_ARDUINO_MKR
-    select MODULE_BOARDS_COMMON_ARDUINO-MKR if TEST_KCONFIG
 
 source "$(RIOTBOARD)/common/arduino-mkr/Kconfig"

boards/arduino-mkrfox1200/Kconfig

@@ -11,6 +11,5 @@ config BOARD_ARDUINO_MKRFOX1200
     bool
     default y
     select BOARD_COMMON_ARDUINO_MKR
-    select MODULE_BOARDS_COMMON_ARDUINO-MKR if TEST_KCONFIG
 
 source "$(RIOTBOARD)/common/arduino-mkr/Kconfig"

boards/arduino-mkrwan1300/Kconfig

@@ -11,6 +11,5 @@ config BOARD_ARDUINO_MKRWAN1300
     bool
     default y
     select BOARD_COMMON_ARDUINO_MKR
-    select MODULE_BOARDS_COMMON_ARDUINO-MKR if TEST_KCONFIG
 
 source "$(RIOTBOARD)/common/arduino-mkr/Kconfig"

boards/arduino-mkrzero/Kconfig

@@ -11,6 +11,5 @@ config BOARD_ARDUINO_MKRZERO
     bool
     default y
     select BOARD_COMMON_ARDUINO_MKR
-    select MODULE_BOARDS_COMMON_ARDUINO-MKR if TEST_KCONFIG
 
 source "$(RIOTBOARD)/common/arduino-mkr/Kconfig"

boards/arduino-nano-33-ble/Kconfig

@@ -12,17 +12,5 @@ config BOARD_ARDUINO_NANO_33_BLE
     default y
     select BOARD_COMMON_NRF52
     select CPU_MODEL_NRF52840XXAA
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-    select HAS_HIGHLEVEL_STDIO
-
-    select HAVE_SAUL_GPIO
-
-    select MODULE_USB_BOARD_RESET if KCONFIG_USB && TEST_KCONFIG
-
-config FORCE_USB_STDIO
-    default y
 
 source "$(RIOTBOARD)/common/nrf52/Kconfig"

boards/arduino-nano-33-iot/Kconfig

@@ -11,17 +11,3 @@ config BOARD_ARDUINO_NANO_33_IOT
     bool
     default y
     select CPU_MODEL_SAMD21G18A
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-    select HAS_HIGHLEVEL_STDIO
-
-    select HAVE_SAUL_GPIO
-
-source "$(RIOTBOARD)/common/samdx1-arduino-bootloader/Kconfig"

boards/arduino-nano/Kconfig

@@ -9,8 +9,6 @@ config BOARD_ARDUINO_NANO
     default y
     select BOARD_COMMON_ARDUINO_ATMEGA
     select CPU_MODEL_ATMEGA328P
-    select MODULE_BOARDS_COMMON_ARDUINO-ATMEGA if TEST_KCONFIG
-    select HAS_ARDUINO_SHIELD_NANO
 
 config BOARD
     default "arduino-nano" if BOARD_ARDUINO_NANO

boards/arduino-uno/Kconfig

@@ -9,8 +9,6 @@ config BOARD_ARDUINO_UNO
     default y
     select CPU_MODEL_ATMEGA328P
     select BOARD_COMMON_ARDUINO_ATMEGA
-    select MODULE_BOARDS_COMMON_ARDUINO-ATMEGA if TEST_KCONFIG
-    select HAS_ARDUINO_SHIELD_UNO
 
 config BOARD
     default "arduino-uno" if BOARD_ARDUINO_UNO

boards/arduino-zero/Kconfig

@@ -11,7 +11,6 @@ config BOARD
 config BOARD_ARDUINO_ZERO
     bool
     default y
-    select HAS_TINYUSB_DEVICE
     select BOARD_COMMON_ARDUINO_ZERO
 
 source "$(RIOTBOARD)/common/arduino-zero/Kconfig"

boards/atmega1284p/Kconfig

@@ -11,15 +11,3 @@ config BOARD_ATMEGA1284P
     bool
     default y
     select CPU_MODEL_ATMEGA1284P
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select MODULE_BOARDS_COMMON_ATMEGA if TEST_KCONFIG
-
-source "$(RIOTBOARD)/common/atmega/Kconfig"

boards/atmega256rfr2-xpro/Kconfig

@@ -11,16 +11,3 @@ config BOARD_ATMEGA256RFR2_XPRO
     bool
     default y
     select CPU_MODEL_ATMEGA256RFR2
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO
-    select HAVE_AT30TSE75X
-    select MODULE_BOARDS_COMMON_ATMEGA if TEST_KCONFIG
-
-source "$(RIOTBOARD)/common/atmega/Kconfig"

boards/atmega328p-xplained-mini/Kconfig

@@ -12,18 +12,3 @@ config BOARD_ATMEGA328P_XPLAINED_MINI
     bool
     default y
     select CPU_MODEL_ATMEGA328P
-    # Put defined MCU peripherals here (in alphabetical order)
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO
-    select MODULE_BOARDS_COMMON_ATMEGA if TEST_KCONFIG
-    select MODULE_ATMEGA_PCINT0 if TEST_KCONFIG
-
-source "$(RIOTBOARD)/common/atmega/Kconfig"

boards/atmega328p/Kconfig

@@ -11,16 +11,3 @@ config BOARD_ATMEGA328P
     bool
     default y
     select CPU_MODEL_ATMEGA328P
-    # Put defined MCU peripherals here (in alphabetical order)
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    # Various other features (if any)
-    select MODULE_BOARDS_COMMON_ATMEGA if TEST_KCONFIG
-
-source "$(RIOTBOARD)/common/atmega/Kconfig"

boards/atmega8/Kconfig

@@ -11,15 +11,3 @@ config BOARD_ATMEGA8
     bool
     default y
     select CPU_MODEL_ATMEGA8
-    # Put defined MCU peripherals here (in alphabetical order)
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    # Various other features (if any)
-    select MODULE_BOARDS_COMMON_ATMEGA if TEST_KCONFIG
-
-source "$(RIOTBOARD)/common/atmega/Kconfig"

boards/atxmega-a1-xplained/Kconfig

@@ -12,12 +12,3 @@ config BOARD_ATXMEGA_A1_XPLAINED
     bool
     default y
     select CPU_MODEL_XMEGA128A1
-
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO
-    select MODULE_BOARDS_COMMON_ATXMEGA if TEST_KCONFIG
-
-source "$(RIOTBOARD)/common/atxmega/Kconfig"

boards/atxmega-a1u-xpro/Kconfig

@@ -12,12 +12,3 @@ config BOARD_ATXMEGA_A1U_XPRO
     bool
     default y
     select CPU_MODEL_XMEGA128A1U
-
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO
-    select MODULE_BOARDS_COMMON_ATXMEGA if TEST_KCONFIG
-
-source "$(RIOTBOARD)/common/atxmega/Kconfig"

boards/atxmega-a3bu-xplained/Kconfig

@@ -12,12 +12,3 @@ config BOARD_ATXMEGA_A3BU_XPLAINED
     bool
     default y
     select CPU_MODEL_XMEGA256A3BU
-
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO
-    select MODULE_BOARDS_COMMON_ATXMEGA if TEST_KCONFIG
-
-source "$(RIOTBOARD)/common/atxmega/Kconfig"

boards/avr-rss2/Kconfig

@@ -11,20 +11,3 @@ config BOARD_AVR_RSS2
     bool
     default y
     select CPU_MODEL_ATMEGA256RFR2
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select MODULE_BOARDS_COMMON_ATMEGA if TEST_KCONFIG
-    select MODULE_ATMEGA_PCINT0 if TEST_KCONFIG
-    select HAVE_SAUL_GPIO
-    select HAVE_BME280_I2C
-    select HAVE_AT24MAC
-    select HAVE_MTD_AT24CXXX
-
-
-source "$(RIOTBOARD)/common/atmega/Kconfig"

boards/avsextrem/Kconfig

@@ -11,7 +11,3 @@ config BOARD_AVSEXTREM
     bool
     default y
     select CPU_MODEL_LPC2387
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART

boards/b-l072z-lrwan1/Kconfig

@@ -13,28 +13,7 @@ config BOARD_B_L072Z_LRWAN1
     default y
     select CPU_MODEL_STM32L072CZ
 
-    # Put defined MCU peripherals here (in alphabetical order)
-    select HAS_PERIPH_DMA
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_SPI_GPIO_MODE
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    # Put other features for this board (in alphabetical order)
-    # For riotboot you need an openocd that supports dualbank flashing.
-    # The 0.10.0 openocd version in Ubuntu Bionic doesn't work. The change was
-    # introduced after Jun 8, 2017 - v0.10.0-1-20170607-2132-dev.
-    select HAS_RIOTBOOT
-
     # Clock configuration
     select BOARD_HAS_LSE
 
-    select HAVE_SAUL_GPIO
-
-config MODULE_PERIPH_INIT_LED0
-    default n if MODULE_PERIPH_SPI
-
 source "$(RIOTBOARD)/common/stm32/Kconfig"

boards/b-l475e-iot01a/Kconfig

@@ -13,31 +13,7 @@ config BOARD_B_L475E_IOT01A
     default y
     select CPU_MODEL_STM32L475VG
 
-    # Put defined MCU peripherals here (in alphabetical order)
-    select HAS_PERIPH_DMA
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-
-    # Put other features for this board (in alphabetical order)
-    select HAS_RIOTBOOT
-    select HAS_TINYUSB_DEVICE
-
     # Clock configuration
     select BOARD_HAS_LSE
 
-    select HAVE_SAUL_GPIO
-    select HAVE_HTS221
-    select HAVE_LIS3MDL
-    select HAVE_LPS22HB
-    select HAVE_LSM6DSL
-
-config MODULE_PERIPH_INIT_LED0
-    default n if MODULE_PERIPH_SPI
-
 source "$(RIOTBOARD)/common/stm32/Kconfig"

boards/b-u585i-iot02a/Kconfig

@@ -13,23 +13,7 @@ config BOARD_B_U585I_IOT02A
     default y
     select CPU_MODEL_STM32U585AI
 
-    # Put defined MCU peripherals here (in alphabetical order)
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-
-    # Put other features for this board (in alphabetical order)
-    select HAS_TINYUSB_DEVICE
-
     # Clock configuration
     select BOARD_HAS_LSE
 
-    select HAVE_SAUL_GPIO
-    select HAVE_HTS221
-    select HAVE_LPS22HH
-
-config MODULE_PERIPH_INIT_LED0
-    default n if MODULE_PERIPH_SPI
-
 source "$(RIOTBOARD)/common/stm32/Kconfig"

boards/bastwan/Kconfig

@@ -11,19 +11,3 @@ config BOARD_BASTWAN
     bool
     default y
     select CPU_MODEL_SAMR34J18B
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-    select HAS_RIOTBOOT
-    select HAS_HIGHLEVEL_STDIO
-
-    select HAVE_SAUL_GPIO
-    select HAVE_SX1276
-
-config FORCE_USB_STDIO
-    default y

boards/blackpill-stm32f103c8/Kconfig

@@ -13,6 +13,5 @@ config BOARD_BLACKPILL_STM32F103C8
     default y
     select BOARD_COMMON_BLXXXPILL
     select CPU_MODEL_STM32F103C8
-    select MODULE_BOARDS_COMMON_BLXXXPILL if TEST_KCONFIG
 
 source "$(RIOTBOARD)/common/blxxxpill/Kconfig"

boards/blackpill-stm32f103cb/Kconfig

@@ -13,18 +13,5 @@ config BOARD_BLACKPILL_STM32F103CB
     default y
     select BOARD_COMMON_BLXXXPILL
     select CPU_MODEL_STM32F103CB
-    select MODULE_BOARDS_COMMON_BLXXXPILL if TEST_KCONFIG
-
-    select HAS_HIGHLEVEL_STDIO
-
-config FORCE_USB_STDIO
-    default y
-
-# HACK: This is added due to the make resolution
-# make will select timer backend, probably due to the USBUS
-# and kconfig cannot select if something is already selected like make
-choice ZTIMER_MSEC_BACKEND
-    default ZTIMER_MSEC_BACKEND_TIMER if MODULE_PERIPH_RTC
-endchoice
 
 source "$(RIOTBOARD)/common/blxxxpill/Kconfig"

boards/bluepill-stm32f030c8/Kconfig

@@ -12,14 +12,3 @@ config BOARD_BLUEPILL_STM32F030C8
     bool
     default y
     select CPU_MODEL_STM32F030C8
-
-    # Put defined MCU peripherals here (in alphabetical order)
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_RTC
-
-    select HAVE_SAUL_GPIO

boards/bluepill-stm32f103c8/Kconfig

@@ -13,6 +13,5 @@ config BOARD_BLUEPILL_STM32F103C8
     default y
     select BOARD_COMMON_BLXXXPILL
     select CPU_MODEL_STM32F103C8
-    select MODULE_BOARDS_COMMON_BLXXXPILL if TEST_KCONFIG
 
 source "$(RIOTBOARD)/common/blxxxpill/Kconfig"

boards/bluepill-stm32f103cb/Kconfig

@@ -13,18 +13,5 @@ config BOARD_BLUEPILL_STM32F103CB
     default y
     select BOARD_COMMON_BLXXXPILL
     select CPU_MODEL_STM32F103CB
-    select MODULE_BOARDS_COMMON_BLXXXPILL if TEST_KCONFIG
-
-    select HAS_HIGHLEVEL_STDIO
-
-config FORCE_USB_STDIO
-    default y
-
-# HACK: This is added due to the make resolution
-# make will select timer backend, probably due to the USBUS
-# and kconfig cannot select if something is already selected like make
-choice ZTIMER_MSEC_BACKEND
-    default ZTIMER_MSEC_BACKEND_TIMER if MODULE_PERIPH_RTC
-endchoice
 
 source "$(RIOTBOARD)/common/blxxxpill/Kconfig"

boards/calliope-mini/Kconfig

@@ -12,12 +12,5 @@ config BOARD_CALLIOPE_MINI
     default y
     select BOARD_COMMON_NRF51
     select CPU_MODEL_NRF51X22XXAB
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_PWM
 
-    select HAVE_SAUL_GPIO
-    select HAVE_BMX055
-
-source "$(RIOTBOARD)/common/microbit/Kconfig"
 source "$(RIOTBOARD)/common/nrf51/Kconfig"

boards/cc1312-launchpad/Kconfig

@@ -12,10 +12,3 @@ config BOARD_CC1312_LAUNCHPAD
     bool
     default y
     select CPU_MODEL_CC1312R1F3
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO

boards/cc1350-launchpad/Kconfig

@@ -12,10 +12,3 @@ config BOARD_CC1350_LAUNCHPAD
     bool
     default y
     select CPU_MODEL_CC13X0F128
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO

boards/cc1352-launchpad/Kconfig

@@ -12,10 +12,3 @@ config BOARD_CC1352_LAUNCHPAD
     bool
     default y
     select CPU_MODEL_CC1352R1
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO

boards/cc1352p-launchpad/Kconfig

@@ -12,10 +12,3 @@ config BOARD_CC1352P_LAUNCHPAD
     bool
     default y
     select CPU_MODEL_CC1352P1
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO

boards/cc2538dk/Kconfig

@@ -11,13 +11,3 @@ config BOARD_CC2538DK
     bool
     default y
     select CPU_MODEL_CC2538NF53
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_EMULATOR_RENODE
-    select HAS_RIOTBOOT
-
-    select HAVE_CC2538_RF

boards/cc2650-launchpad/Kconfig

@@ -12,10 +12,3 @@ config BOARD_CC2650_LAUNCHPAD
     bool
     default y
     select CPU_MODEL_CC26X0F128
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO

boards/cc2650stk/Kconfig

@@ -12,8 +12,3 @@ config BOARD_CC2650STK
     bool
     default y
     select CPU_MODEL_CC26X0F128
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART

boards/common/arduino-atmega/Kconfig

@@ -6,29 +6,3 @@
 
 config BOARD_COMMON_ARDUINO_ATMEGA
     bool
-    # Put defined MCU peripherals here (in alphabetical order)
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    # Various other features (if any)
-    select HAS_ARDUINO_ANALOG
-    select HAS_ARDUINO_I2C
-    select HAS_ARDUINO_PINS
-    select HAS_ARDUINO_PWM
-    select HAS_ARDUINO_SHIELD_ISP
-    select HAS_ARDUINO_SPI
-    select HAS_ARDUINO_UART
-
-    select HAVE_SAUL_GPIO
-
-config MODULE_BOARDS_COMMON_ARDUINO-ATMEGA
-    bool
-    depends on TEST_KCONFIG
-    select MODULE_BOARDS_COMMON_ATMEGA
-    help
-       Common code of Arduino ATmega boards.
-
-source "$(RIOTBOARD)/common/atmega/Kconfig"

boards/common/arduino-due/Kconfig

@@ -7,30 +7,3 @@
 config BOARD_COMMON_ARDUINO_DUE
     bool
     select CPU_MODEL_SAM3X8E
-    select HAS_ARDUINO_ANALOG
-    select HAS_ARDUINO_DAC
-    select HAS_ARDUINO_I2C
-    select HAS_ARDUINO_PINS
-    select HAS_ARDUINO_SHIELD_ISP
-    select HAS_ARDUINO_SHIELD_MEGA
-    select HAS_ARDUINO_SHIELD_UNO
-    select HAS_ARDUINO_SPI
-    select HAS_ARDUINO_UART
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_DAC
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO
-    select MODULE_BOARDS_COMMON_ARDUINO_DUE if TEST_KCONFIG
-
-config MODULE_BOARDS_COMMON_ARDUINO_DUE
-    bool
-    depends on TEST_KCONFIG
-    help
-      Common code for boards based on arduino-due.

boards/common/arduino-mkr/Kconfig

@@ -7,26 +7,3 @@
 config BOARD_COMMON_ARDUINO_MKR
     bool
     select CPU_MODEL_SAMD21G18A
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-    select HAS_ARDUINO_ANALOG
-    select HAS_ARDUINO_PINS
-    select HAS_ARDUINO_PWM
-    select HAS_HIGHLEVEL_STDIO
-
-    select HAVE_SAUL_GPIO
-
-config MODULE_BOARDS_COMMON_ARDUINO-MKR
-    bool
-    depends on TEST_KCONFIG
-    help
-        Common code for arduino-mkr type of boards.
-
-source "$(RIOTBOARD)/common/samdx1-arduino-bootloader/Kconfig"

boards/common/arduino-zero/Kconfig

@@ -7,29 +7,3 @@
 config BOARD_COMMON_ARDUINO_ZERO
     bool
     select CPU_MODEL_SAMD21G18A
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-    select HAS_ARDUINO_ANALOG
-    select HAS_ARDUINO_I2C
-    select HAS_ARDUINO_PINS
-    select HAS_ARDUINO_PWM
-    select HAS_ARDUINO_SHIELD_ISP
-    select HAS_ARDUINO_SHIELD_UNO
-    select HAS_ARDUINO_SPI
-    select HAS_ARDUINO_UART
-
-    select HAVE_SAUL_GPIO
-
-config MODULE_BOARDS_COMMON_ARDUINO_ZERO
-    bool
-    depends on TEST_KCONFIG
-    default y
-    help
-        Common code for arduino-zero type of boards.

boards/common/atmega/Kconfig

@@ -1,12 +0,0 @@
-# Copyright (c) 2021 HAW Hamburg
-#
-# This file is subject to the terms and conditions of the GNU Lesser
-# General Public License v2.1. See the file LICENSE in the top level
-# directory for more details.
-#
-
-config MODULE_BOARDS_COMMON_ATMEGA
-    bool
-    depends on TEST_KCONFIG
-    help
-        Common code of ATmega boards.

boards/common/atxmega/Kconfig

@@ -1,12 +0,0 @@
-# Copyright (c) 2021 HAW Hamburg
-#
-# This file is subject to the terms and conditions of the GNU Lesser
-# General Public License v2.1. See the file LICENSE in the top level
-# directory for more details.
-#
-
-config MODULE_BOARDS_COMMON_ATXMEGA
-    bool
-    depends on TEST_KCONFIG
-    help
-        Common ATXmega boards code.

boards/common/blxxxpill/Kconfig

@@ -7,30 +7,10 @@
 
 config BOARD_COMMON_BLXXXPILL
     bool
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_DMA
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_QDEC
-    select HAS_PERIPH_USBDEV
-    select HAS_RIOTBOOT
 
     # Clock configuration
     select BOARD_HAS_HSE
     select BOARD_HAS_LSE
 
-    select HAVE_SAUL_GPIO
-
-config MODULE_BOARDS_COMMON_BLXXXPILL
-    bool
-    depends on TEST_KCONFIG
-    help
-       Common code of bluepill-stm32f103xx and blackpill-stm32f103xx boards
-
 
 source "$(RIOTBOARD)/common/stm32/Kconfig"

boards/common/e104-bt50xxa-tb/Kconfig

@@ -7,32 +7,5 @@
 config BOARD_COMMON_E104_BT50XXA_TB
     bool
     select BOARD_COMMON_NRF52
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO
-    select MODULE_BOARDS_COMMON_E104_BT50XXA_TB if TEST_KCONFIG
-
-config MODULE_BOARDS_COMMON_E104_BT50XXA_TB
-    bool
-    depends on TEST_KCONFIG
-    help
-       common code of e104-bt50xxa-tb boards
-
-config MODULE_BOARD_SOFTWARE_RESET
-    bool "Enable softare reset button"
-    default y
-    depends on HAS_PERIPH_GPIO
-    depends on HAS_PERIPH_GPIO_IRQ
-    depends on HAS_PERIPH_PM
-    depends on TEST_KCONFIG
-    select MODULE_PERIPH_GPIO
-    select MODULE_PERIPH_GPIO_IRQ
-    select MODULE_PERIPH_PM
-
-choice NRF5X_RADIO_BACKEND
-    default MODULE_NRFMIN
-endchoice
 
 source "$(RIOTBOARD)/common/nrf52/Kconfig"

boards/common/esp32/Kconfig

@@ -8,13 +8,4 @@ config BOARD_COMMON_ESP32
     bool
     select BOARD_COMMON_ESP32X
 
-config MODULE_BOARDS_COMMON_ESP32
-    bool
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_ESP32
-    depends on HAS_ARCH_ESP32
-    default y
-    help
-      Common ESP32 boards code.
-
 source "$(RIOTBOARD)/common/esp32x/Kconfig"

boards/common/esp32c3/Kconfig

@@ -9,13 +9,4 @@ config BOARD_COMMON_ESP32C3
     bool
     select BOARD_COMMON_ESP32X
 
-config MODULE_BOARDS_COMMON_ESP32C3
-    bool
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_ESP32C3
-    depends on HAS_ARCH_ESP32
-    default y
-    help
-      Common ESP32-C3 boards code.
-
 source "$(RIOTBOARD)/common/esp32x/Kconfig"

boards/common/esp32s2/Kconfig

@@ -9,13 +9,4 @@ config BOARD_COMMON_ESP32S2
     bool
     select BOARD_COMMON_ESP32X
 
-config MODULE_BOARDS_COMMON_ESP32S2
-    bool
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_ESP32S2
-    depends on HAS_ARCH_ESP32
-    default y
-    help
-      Common ESP32-S2 boards code.
-
 source "$(RIOTBOARD)/common/esp32x/Kconfig"

boards/common/esp32s3/Kconfig

@@ -9,13 +9,4 @@ config BOARD_COMMON_ESP32S3
     bool
     select BOARD_COMMON_ESP32X
 
-config MODULE_BOARDS_COMMON_ESP32S3
-    bool
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_ESP32S3
-    depends on HAS_ARCH_ESP32
-    default y
-    help
-      Common ESP32-S3 boards code.
-
 source "$(RIOTBOARD)/common/esp32x/Kconfig"

boards/common/esp32x/Kconfig

@@ -6,15 +6,3 @@
 
 config BOARD_COMMON_ESP32X
     bool
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO
-
-config MODULE_BOARDS_COMMON_ESP32X
-    bool
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_ESP32X
-    depends on HAS_ARCH_ESP32
-    default y
-    help
-      Common ESP32x boards code.

boards/common/esp8266/Kconfig

@@ -6,20 +6,3 @@
 
 config BOARD_COMMON_ESP8266
     bool
-    select HAS_ARDUINO_PINS
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO
-
-config MODULE_BOARDS_COMMON_ESP8266
-    bool
-    depends on TEST_KCONFIG
-    depends on HAS_ARCH_ESP8266
-    depends on BOARD_COMMON_ESP8266
-    default y
-    help
-      Common ESP8266 boards code.

boards/common/iotlab/Kconfig

@@ -8,32 +8,12 @@
 config BOARD_COMMON_IOTLAB
     bool
     select CPU_MODEL_STM32F103RE
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    # Put other features for this board (in alphabetical order)
-    select HAS_RIOTBOOT
 
     # Clock configuration
     select BOARD_HAS_HSE
     select BOARD_HAS_LSE
 
-    select HAVE_AT86RF231
-    select HAVE_SAUL_GPIO
-    select HAVE_L3G4200D_NG
-    select HAVE_LSM303DLHC
-
 config CLOCK_HSE
     default 16000000
 
-config MODULE_BOARDS_COMMON_IOTLAB
-    bool
-    depends on TEST_KCONFIG
-    help
-       Common code of iotlab based boards
-
 source "$(RIOTBOARD)/common/stm32/Kconfig"

boards/common/kw41z/Kconfig

@@ -8,18 +8,3 @@ config BOARD_COMMON_KW41Z
     bool
     default y
     select CPU_MODEL_MKW41Z512VHT4
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_RIOTBOOT
-
-    select HAVE_KW41ZRF
-    select HAVE_SAUL_ADC
-    select HAVE_SAUL_GPIO
-
-config MODULE_BOARDS_COMMON_KW41Z
-    bool
-    help
-      Common code for kw41z-based boards.

boards/common/microbit/Kconfig

@@ -1,11 +0,0 @@
-# Copyright (c) 2021 Inria
-#
-# This file is subject to the terms and conditions of the GNU Lesser
-# General Public License v2.1. See the file LICENSE in the top level
-# directory for more details.
-
-config MODULE_MICROBIT
-    bool "BBC micro:bit specific LED matrix handling"
-    select MODULE_ZTIMER
-    select ZTIMER_USEC
-    select MODULE_MINEPLEX

boards/common/msb-430/Kconfig

@@ -9,11 +9,3 @@ config BOARD_COMMON_MSB_430
     bool
     default y
     select CPU_MODEL_MSP430F1612
-
-config MODULE_BOARDS_COMMON_MSB_430
-    bool
-    default y
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_MSB_430
-    help
-        Common code for msb-430 boards.

boards/common/nrf51/Kconfig

@@ -6,17 +6,3 @@
 
 config BOARD_COMMON_NRF51
     bool
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_TIMER
-
-    select HAVE_SAUL_NRF_TEMPERATURE
-
-config MODULE_BOARDS_COMMON_NRF51
-    bool
-    depends on TEST_KCONFIG
-    help
-       Common code of NRF51 boards
-
-choice NRF5X_RADIO_BACKEND
-    default MODULE_NRFMIN
-endchoice

boards/common/nrf52/Kconfig

@@ -6,8 +6,3 @@
 
 config BOARD_COMMON_NRF52
     bool
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_TIMER
-    select HAS_RIOTBOOT
-
-    select HAVE_SAUL_NRF_TEMPERATURE

boards/common/nrf52xxxdk/Kconfig

@@ -7,19 +7,5 @@
 config BOARDS_COMMON_NRF52XXXDK
     bool
     select BOARD_COMMON_NRF52
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-    select HAS_VDD_LC_FILTER_REG1
-
-    select HAVE_SAUL_GPIO
-    select HAVE_SAUL_PWM
-
-config MODULE_BOARDS_COMMON_NRF52XXXDK
-    bool
-    depends on TEST_KCONFIG
-    help
-        Common code for boards based on nrf52xxxdk.
 
 source "$(RIOTBOARD)/common/nrf52/Kconfig"

boards/common/nucleo/Kconfig

@@ -5,15 +5,4 @@
 # directory for more details.
 #
 
-if TEST_KCONFIG
-
-config MODULE_BOARDS_COMMON_NUCLEO
-    bool
-    default y
-    select HAVE_SAUL_GPIO
-    help
-        stm32 common nucleo code.
-
-endif # TEST_KCONFIG
-
 rsource "../stm32/Kconfig"

boards/common/nucleo144/Kconfig

@@ -7,10 +7,6 @@
 
 config BOARD_COMMON_NUCLEO144
     bool
-    select HAS_ARDUINO_ANALOG
-    select HAS_ARDUINO_PINS
-    select HAS_ARDUINO_SHIELD_MEGA
-    select HAS_ARDUINO_SHIELD_UNO
 
     # Clock configuration
     select BOARD_HAS_HSE if !CPU_FAM_L4 && !CPU_FAM_L5

boards/common/nucleo32/Kconfig

@@ -7,15 +7,9 @@
 
 config BOARD_COMMON_NUCLEO32
     bool
-    select HAS_ARDUINO_ANALOG
-    select HAS_ARDUINO_PINS
-    select HAS_ARDUINO_SHIELD_NANO
 
     # Clock configuration
     select BOARD_HAS_LSE if (CPU_FAM_L0 || CPU_FAM_L4) && !BOARD_NUCLEO_L011K4
 
-config MODULE_PERIPH_INIT_LED0
-    default n if MODULE_PERIPH_SPI
-
 source "$(RIOTBOARD)/common/nucleo/Kconfig"
 source "$(RIOTBOARD)/common/stm32/Kconfig"

boards/common/nucleo64/Kconfig

@@ -7,19 +7,10 @@
 
 config BOARD_COMMON_NUCLEO64
     bool
-    select HAS_ARDUINO_ANALOG
-    select HAS_ARDUINO_I2C
-    select HAS_ARDUINO_PINS
-    select HAS_ARDUINO_SHIELD_UNO
-    select HAS_ARDUINO_SPI
-    select HAS_ARDUINO_UART
 
     # Clock configuration
     select BOARD_HAS_HSE if !CPU_FAM_G0 && !CPU_FAM_L0 && !CPU_FAM_L1 && !CPU_FAM_L4
     select BOARD_HAS_LSE if !BOARD_NUCLEO_L152RE
 
-config MODULE_PERIPH_INIT_LED0
-    default n if MODULE_PERIPH_SPI
-
 source "$(RIOTBOARD)/common/nucleo/Kconfig"
 source "$(RIOTBOARD)/common/stm32/Kconfig"

boards/common/particle-mesh/Kconfig

@@ -8,28 +8,5 @@ config BOARD_COMMON_PARTICLE_MESH
     bool
     select BOARD_COMMON_NRF52
     select CPU_MODEL_NRF52840XXAA
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_UART_HW_FC
-    select HAS_PERIPH_USBDEV
-    select HAS_HIGHLEVEL_STDIO
-    select HAS_VDD_LC_FILTER_REG1
-
-    select HAVE_SAUL_GPIO
-    select HAVE_SAUL_PWM
-
-    select MODULE_BOARDS_COMMON_PARTICLE_MESH if TEST_KCONFIG
-    select MODULE_USB_BOARD_RESET if KCONFIG_USB && TEST_KCONFIG
-
-config MODULE_BOARDS_COMMON_PARTICLE_MESH
-    bool
-    depends on TEST_KCONFIG
-    help
-       Common code for particle-mesh boards
-
-config FORCE_USB_STDIO
-    default y
 
 source "$(RIOTBOARD)/common/nrf52/Kconfig"

boards/common/qn908x/Kconfig

@@ -7,11 +7,4 @@
 config BOARD_COMMON_QN908X
     bool
     depends on CPU_FAM_QN908X
-    select MODULE_BOARD_COMMON_QN908X if TEST_KCONFIG
     # Add common board support here.
-
-config MODULE_BOARDS_COMMON_QN908X
-    bool
-    depends on TEST_KCONFIG
-    help
-      Common code for qn908x boards.

boards/common/remote/Kconfig

@@ -9,17 +9,3 @@ config BOARD_COMMON_REMOTE
     bool
     default y
     select CPU_MODEL_CC2538SF53
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_RIOTBOOT
-
-    select HAVE_CC2538_RF
-
-config MODULE_BOARDS_COMMON_REMOTE
-    bool
-    default y
-    depends on TEST_KCONFIG

boards/common/samdx1-arduino-bootloader/Kconfig

@@ -1,16 +0,0 @@
-# Copyright (c) 2021 HAW Hamburg
-#
-# This file is subject to the terms and conditions of the GNU Lesser
-# General Public License v2.1. See the file LICENSE in the top level
-# directory for more details.
-
-config MODULE_BOARDS_COMMON_SAMDX1-ARDUINO-BOOTLOADER
-    bool
-    default y if MODULE_USBUS_CDC_ACM
-    imply MODULE_USB_BOARD_RESET
-    depends on TEST_KCONFIG
-    help
-       Common code of samdx1 boards with an arduino bootloader
-
-config FORCE_USB_STDIO
-    default y

boards/common/saml1x/Kconfig

@@ -6,24 +6,3 @@
 
 config BOARD_COMMON_SAML1X
     bool
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_DAC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_RIOTBOOT
-
-    select HAVE_SAUL_GPIO
-
-config MODULE_BOARDS_COMMON_SAML1X
-    bool
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_SAML1X
-    default y
-    help
-        Board specific code for the Microchip SAML10 and SAML11 Xplained Pro
-        boards.

boards/common/silabs/Kconfig

@@ -6,17 +6,3 @@
 
 config BOARD_COMMON_SILABS
     bool
-    select HAS_ARDUINO_ANALOG
-    select HAS_ARDUINO_PINS
-    select HAS_EFM32_CORETEMP
-    select HAS_RIOTBOOT
-
-config MODULE_BOARDS_COMMON_SILABS
-    bool
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_SILABS
-    default y
-    help
-        Common silabs board code.
-
-rsource "drivers/Kconfig"

boards/common/silabs/drivers/Kconfig

@@ -1,10 +0,0 @@
-# Copyright (c) 2021 HAW Hamburg
-#
-# This file is subject to the terms and conditions of the GNU Lesser
-# General Public License v2.1. See the file LICENSE in the top level
-# directory for more details.
-#
-
-rsource "aem/Kconfig"
-rsource "bc/Kconfig"
-rsource "pic/Kconfig"

boards/common/silabs/drivers/aem/Kconfig

@@ -1,13 +0,0 @@
-# Copyright (c) 2021 HAW Hamburg
-#
-# This file is subject to the terms and conditions of the GNU Lesser
-# General Public License v2.1. See the file LICENSE in the top level
-# directory for more details.
-#
-
-config MODULE_SILABS_AEM
-    bool
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_SILABS
-    help
-        Advanced energy monitor driver for silabs boards.

boards/common/silabs/drivers/bc/Kconfig

@@ -1,13 +0,0 @@
-# Copyright (c) 2021 HAW Hamburg
-#
-# This file is subject to the terms and conditions of the GNU Lesser
-# General Public License v2.1. See the file LICENSE in the top level
-# directory for more details.
-#
-
-config MODULE_SILABS_BC
-    bool
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_SILABS
-    help
-        Board controller driver for silabs boards.

boards/common/silabs/drivers/pic/Kconfig

@@ -1,15 +0,0 @@
-# Copyright (c) 2021 HAW Hamburg
-#
-# This file is subject to the terms and conditions of the GNU Lesser
-# General Public License v2.1. See the file LICENSE in the top level
-# directory for more details.
-#
-
-config MODULE_SILABS_PIC
-    bool
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_SILABS
-    depends on HAS_PERIPH_I2C
-    select MODULE_PERIPH_I2C
-    help
-        Power-and-interrupt controller driver for silabs boards.

boards/common/slwstk6000b/Kconfig

@@ -7,24 +7,5 @@
 config BOARD_COMMON_SLWSTK6000B
     bool
     select BOARD_COMMON_SILABS
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    # additional hardware present in the board
-    select HAVE_SAUL_GPIO
-    select HAVE_SI7021
-
-config MODULE_BOARD_COMMON_SLWSTK6000B
-    bool
-    depends on TEST_KCONFIG
-    depends on BOARD_COMMON_SLWSTK6000B
-    select MODULE_SILABS_AEM
-    select MODULE_SILABS_BC
-    help
-        Common code for SLWSTK6000B silabs boards.
 
 source "$(RIOTBOARD)/common/silabs/Kconfig"

boards/common/sodaq/Kconfig

@@ -6,23 +6,3 @@
 
 config BOARD_COMMON_SODAQ
     bool
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-    select HAS_ARDUINO_PINS
-    select HAS_HIGHLEVEL_STDIO
-
-    select HAVE_SAUL_GPIO
-
-config MODULE_BOARDS_COMMON_SODAQ
-    bool
-    depends on TEST_KCONFIG
-    help
-        Common code for Sodaq boards.
-
-source "$(RIOTBOARD)/common/samdx1-arduino-bootloader/Kconfig"

boards/common/weact-f4x1cx/Kconfig

@@ -7,36 +7,12 @@
 
 config BOARD_COMMON_WEACT_F4X1CX
     bool
-    # Put defined MCU peripherals here (in alphabetical order)
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_PERIPH_USBDEV
-    select HAS_HIGHLEVEL_STDIO
 
     # Clock configuration
     select BOARD_HAS_HSE
     select BOARD_HAS_LSE
 
-    select HAVE_SAUL_GPIO
-    select HAVE_MTD_SPI_NOR
-    select MODULE_BOOTLOADER_STM32 if MODULE_STDIO_CDC_ACM
-    select MODULE_USB_BOARD_RESET if KCONFIG_USB && TEST_KCONFIG
-
 config CLOCK_HSE
     default 25000000
 
-config MODULE_BOARDS_COMMON_WEACT-F4X1CX
-    bool
-    depends on TEST_KCONFIG
-    help
-       Common code of weact based boards
-
-config FORCE_USB_STDIO
-    default y
-
 source "$(RIOTBOARD)/common/stm32/Kconfig"

boards/derfmega128/Kconfig

@@ -11,14 +11,3 @@ config BOARD_DERFMEGA128
     bool
     default y
     select CPU_MODEL_ATMEGA128RFA1
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select MODULE_BOARDS_COMMON_ATMEGA if TEST_KCONFIG
-
-source "$(RIOTBOARD)/common/atmega/Kconfig"

boards/derfmega256/Kconfig

@@ -11,15 +11,3 @@ config BOARD_DERFMEGA256
     bool
     default y
     select CPU_MODEL_ATMEGA256RFR2
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select MODULE_BOARDS_COMMON_ATMEGA if TEST_KCONFIG
-    select MODULE_PERIPH_EEPROM if MODULE_EUI_PROVIDER && HAS_PERIPH_EEPROM
-
-source "$(RIOTBOARD)/common/atmega/Kconfig"

boards/dwm1001/Kconfig

@@ -12,12 +12,5 @@ config BOARD_DWM1001
     default y
     select BOARD_COMMON_NRF52
     select CPU_MODEL_NRF52832XXAA
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_UART
-    select HAS_VDD_LC_FILTER_REG1
-
-    select HAVE_LIS2DH12_I2C
-    select HAVE_SAUL_GPIO
 
 source "$(RIOTBOARD)/common/nrf52/Kconfig"

boards/e180-zg120b-tb/Kconfig

@@ -11,14 +11,5 @@ config BOARD_E180_ZG120B_TB
     bool
     default y
     select CPU_MODEL_EFR32MG1B232F256GM32
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_RTC
-    select HAS_PERIPH_RTT
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-    select HAS_EFM32_CORETEMP
-    select HAS_RIOTBOOT
-
-    select HAVE_SAUL_GPIO
 
 source "$(RIOTBOARD)/common/silabs/Kconfig"

boards/ek-lm4f120xl/Kconfig

@@ -11,11 +11,3 @@ config BOARD_EK_LM4F120XL
     bool
     default y
     select CPU_MODEL_LM4F120H5QR
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_GPIO
-    select HAS_PERIPH_GPIO_IRQ
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_TIMER
-    select HAS_PERIPH_UART
-
-    select HAVE_SAUL_GPIO

boards/esp32-ethernet-kit-v1_0/Kconfig

@@ -13,11 +13,5 @@ config BOARD_ESP32_ETHERNET_KIT_V1_0
     default y
     select BOARD_COMMON_ESP32
     select CPU_MODEL_ESP32_WROVER_B
-    select HAS_ESP_ETH
-    select HAS_ESP_JTAG
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI if !MODULE_ESP_JTAG
 
 source "$(RIOTBOARD)/common/esp32/Kconfig"

boards/esp32-ethernet-kit-v1_1/Kconfig

@@ -13,11 +13,5 @@ config BOARD_ESP32_ETHERNET_KIT_V1_1
     default y
     select BOARD_COMMON_ESP32
     select CPU_MODEL_ESP32_WROVER_B
-    select HAS_ESP_ETH
-    select HAS_ESP_JTAG
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI if !MODULE_ESP_JTAG
 
 source "$(RIOTBOARD)/common/esp32/Kconfig"

boards/esp32-ethernet-kit-v1_2/Kconfig

@@ -13,11 +13,5 @@ config BOARD_ESP32_ETHERNET_KIT_V1_2
     default y
     select BOARD_COMMON_ESP32
     select CPU_MODEL_ESP32_WROVER_E
-    select HAS_ESP_ETH
-    select HAS_ESP_JTAG
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI if !MODULE_ESP_JTAG
 
 source "$(RIOTBOARD)/common/esp32/Kconfig"

boards/esp32-heltec-lora32-v2/Kconfig

@@ -12,13 +12,5 @@ config BOARD_ESP32_HELTEC_LORA32_V2
     default y
     select BOARD_COMMON_ESP32
     select CPU_MODEL_ESP32_D0WD
-    select HAS_ARDUINO_PINS
-    select HAS_ESP_RTC_TIMER_32K
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI
-
-    select HAVE_SX1276
 
 source "$(RIOTBOARD)/common/esp32/Kconfig"

boards/esp32-mh-et-live-minikit/Kconfig

@@ -12,11 +12,5 @@ config BOARD_ESP32_MH_ET_LIVE_MINIKIT
     default y
     select BOARD_COMMON_ESP32
     select CPU_MODEL_ESP32_WROOM_32
-    select HAS_ARDUINO_PINS
-    select HAS_PERIPH_ADC
-    select HAS_PERIPH_DAC
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SPI
 
 source "$(RIOTBOARD)/common/esp32/Kconfig"

boards/esp32-olimex-evb/Kconfig

@@ -12,15 +12,5 @@ config BOARD_ESP32_OLIMEX_EVB
     default y
     select BOARD_COMMON_ESP32
     select CPU_MODEL_ESP32_WROOM_32
-    select HAS_ARDUINO_PINS
-    select HAS_ESP_ETH
-    select HAS_PERIPH_ADC if USEMODULE_OLIMEX_ESP32_GATEWAY
-    select HAS_PERIPH_I2C
-    select HAS_PERIPH_PWM
-    select HAS_PERIPH_SDMMC
-    select HAS_PERIPH_SPI
-    select HAS_PERIPH_CAN
-
-    select HAVE_MTD_SDMMC_DEFAULT
 
 source "$(RIOTBOARD)/common/esp32/Kconfig"