RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
e72049a180
RIOT/boards/qn9080dk/Makefile.features

13 lines
393 B
Makefile
Raw Normal View History

boards/qn9080dk: New board for the QN908x The QN9080DK is the developer board reference from NXP for the QN908x CPUs. The developer kit comes with two boards: a larger PCB with many peripherals and a much smaller "USB dongle". This board adds initial support for the larger "DK board". At the moment, with the minimal CPU support this board only configures the GPIOs available in the board, namely the RGB LED and the two user buttons.
2020-11-29 00:44:15 +01:00
CPU = qn908x
CPU_MODEL = qn9080xhn
# Put defined MCU peripherals here (in alphabetical order)
boards/qn9080dk: Add ADC configuration The QN9080DK board has 6 Analog Input lines in the J6 header, labeled "A0" to "A5". This configuration enables these lines as ADC lines 0 to 5 as well as some other channel options available as lines 6 and up.
2020-12-23 04:34:11 +01:00
FEATURES_PROVIDED += periph_adc
boards/qn9080dk: New board for the QN908x The QN9080DK is the developer board reference from NXP for the QN908x CPUs. The developer kit comes with two boards: a larger PCB with many peripherals and a much smaller "USB dongle". This board adds initial support for the larger "DK board". At the moment, with the minimal CPU support this board only configures the GPIOs available in the board, namely the RGB LED and the two user buttons.
2020-11-29 00:44:15 +01:00
FEATURES_PROVIDED += periph_gpio periph_gpio_irq
boards/qn9080dk: Enable driver for I2C0 The QN9080DK board can expose the I2C bus SDA and SCL in the pins labeled D14 and D15 respectively in the J5 headers, and in the Pmod (J8) connector in the pins 10 and 9 of the header respectively. The bus has a 2K2 pull up resistor on each line when SB7 and SB8 (next to the Pmod connector) are closed, which is the factory default.
2020-12-19 14:37:51 +01:00
FEATURES_PROVIDED += periph_i2c
cpu/qn908x: Add timer driver based on CTIMER. The QN908x CPU has several timer modules: one RTC (Real-Time Clock) that can count from the 32kHz internal clock or 32.768 kHz external clock, four CTIMER that use the APB clock and have four channels each and one SCT timer with up to 10 channels running on the AHB clock. This patch implements a timer driver for the CTIMER blocks only, which is enough to make the xtimer module work. Future patches should improve on this module to support using the RTC CNT2 32-bit free-running counter unit and/or the SCT timer.
2020-01-24 01:15:17 +01:00
FEATURES_PROVIDED += periph_timer
cpu/qn908x: Add support for UART. The QN908x has four FLEXCOMM interfaces that support a subset of UART, SPI or I2C each one. This patch adds generic support for dealing with the FLEXCOMM initialization and interrupts and adds a driver for RX/TX support in UART. With this patch is now possible to use a shell on the device over UART.
2020-04-12 00:13:44 +02:00
FEATURES_PROVIDED += periph_uart periph_uart_modecfg
boards/qn9080dk: New board for the QN908x The QN9080DK is the developer board reference from NXP for the QN908x CPUs. The developer kit comes with two boards: a larger PCB with many peripherals and a much smaller "USB dongle". This board adds initial support for the larger "DK board". At the moment, with the minimal CPU support this board only configures the GPIOs available in the board, namely the RGB LED and the two user buttons.
2020-11-29 00:44:15 +01:00
# Include the common qn908x board features.
include $(RIOTBOARD)/common/qn908x/Makefile.features
Copy Permalink