RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
dd0f9e42f9
RIOT/boards/msba2/Makefile.dep

17 lines
372 B
Makefile
Raw Normal View History

boards: remove duplicate gnrc_netdev_default from Makefile.dep `gnrc_netdev_default` will pull in `netdev_default`, so no need to check for both in `Makefile.dep`
2020-05-04 19:47:27 +02:00
ifneq (,$(filter netdev_default,$(USEMODULE)))
boards: Added cc110x params for MSB-A2 & MSB-IoT
2018-12-21 10:36:01 +01:00
USEMODULE += cc1100
boards: select 868 MHz band for CC110x
2021-09-16 18:47:44 +02:00
USEMODULE += cc110x_868mhz
boards: Added cc110x params for MSB-A2 & MSB-IoT
2018-12-21 10:36:01 +01:00
endif
drivers/sht1x: Major refactoring - Use RIOT's GPIO interface to access the sensor to increase portability - Changed API to allow more than one sensor per board - Added `sht1x_params.h` that specifies how the sensors is connected - each board can overwrite default settings by #defining SHT1X_PARAM_CLK and SHT1X_PARAM_DATA - Changed arithmetic to use integer calculations only instead of floating point arithmetic - Added support for checking the CRC sum - Allow optional skipping of the CRC check to speed up measuring - Added support for advanced features like reducing the resolution and skipping calibration to speed up measuring - Allow specifying the supply voltage of sensor which heavily influences the temperature result (and use that information to calculate the correct temperature) - Reset sensor on initialization to bring it in a well known state - Support for the obscure heater feature. (Can be useful to check the temperature sensor?) - Updated old SHT11 shell commands to the new driver interface, thus allowing more than one SHT10/11/15 sensor to be used - Added new shell command to allow full configuration of all attached SHT1x sensors - Removed old command for setting the SHT11 temperature offset, as this feature is implemented in the new configuration command
2018-06-13 09:17:29 +02:00
ifneq (,$(filter saul_default,$(USEMODULE)))
boards/msba2: Added ltc4150 to saul_default
2018-08-23 11:33:05 +02:00
USEMODULE += ltc4150
drivers/sht1x: Major refactoring - Use RIOT's GPIO interface to access the sensor to increase portability - Changed API to allow more than one sensor per board - Added `sht1x_params.h` that specifies how the sensors is connected - each board can overwrite default settings by #defining SHT1X_PARAM_CLK and SHT1X_PARAM_DATA - Changed arithmetic to use integer calculations only instead of floating point arithmetic - Added support for checking the CRC sum - Allow optional skipping of the CRC check to speed up measuring - Added support for advanced features like reducing the resolution and skipping calibration to speed up measuring - Allow specifying the supply voltage of sensor which heavily influences the temperature result (and use that information to calculate the correct temperature) - Reset sensor on initialization to bring it in a well known state - Support for the obscure heater feature. (Can be useful to check the temperature sensor?) - Updated old SHT11 shell commands to the new driver interface, thus allowing more than one SHT10/11/15 sensor to be used - Added new shell command to allow full configuration of all attached SHT1x sensors - Removed old command for setting the SHT11 temperature offset, as this feature is implemented in the new configuration command
2018-06-13 09:17:29 +02:00
USEMODULE += sht11
endif
boards/msba2: add default MTD backend
2020-09-04 00:46:40 +02:00
# default to mtd_mci if no other MTD backend is selected
ifneq (,$(filter mtd,$(USEMODULE)))
ifeq (,$(filter mtd_%,$(USEMODULE)))
USEMODULE += mtd_mci
endif
endif
Copy Permalink