RIOT/boards/qn9080dk/Makefile.include

CFLAGS += \
  -DCONFIG_BOARD_HAS_XTAL \
  -DCONFIG_BOARD_HAS_XTAL32K \
  -DCONFIG_BOARD_HAS_XTAL_32M \
  #

QN908X_JLINK ?= $(QN9080DK_JLINK)
JLINK_DEVICE ?= QN9080A

# The TTY serial also is the ID of the debug adapter, as the TTY is provided by
# the debug adapter
DEBUG_ADAPTER_ID_IS_TTY_SERIAL := 1

# Include default QN908x board config
include $(RIOTBOARD)/common/qn908x/Makefile.include
boards/qn9080dk: New board for the QN908x The QN9080DK is the developer board reference from NXP for the QN908x CPUs. The developer kit comes with two boards: a larger PCB with many peripherals and a much smaller "USB dongle". This board adds initial support for the larger "DK board". At the moment, with the minimal CPU support this board only configures the GPIOs available in the board, namely the RGB LED and the two user buttons. 2020-11-29 00:44:15 +01:00			`CFLAGS += \`
			`-DCONFIG_BOARD_HAS_XTAL \`
			`-DCONFIG_BOARD_HAS_XTAL32K \`
			`-DCONFIG_BOARD_HAS_XTAL_32M \`
			`#`

boards/qn9080dk: Improve doc and add J-Link support - document that the QN9080DK has an alternative firmware for the debugger/programmer that supports J-Link - allow selecting the debugger firmware via parameter / environment variable - add `JLINK_DEVICE` parameter to allow flashing via J-Link 2023-01-10 16:10:50 +01:00			`QN908X_JLINK ?= $(QN9080DK_JLINK)`
			`JLINK_DEVICE ?= QN9080A`
boards/qn9080dk: add TTY_BOARD_FILTER With `MOST_RECENT_PORT=1` the TTY interface of the most recently connected board with an embedded NXP debugger is selected. If only a single board with an embedded NXP debugger is selected, this will automatically connect to the correct board using: ``` make term MOST_RECENT_PORT=1 ``` 2022-12-05 11:20:39 +01:00
boards: Provide debug adapter ID from serial where possible Set `DEBUG_ADAPTER_ID_IS_TTY_SERIAL` to `1` for those boards to allow automatic detection of the debug adapter with `MOST_RECENT_PORT=1`. 2023-01-10 09:37:29 +01:00			`# The TTY serial also is the ID of the debug adapter, as the TTY is provided by`
			`# the debug adapter`
			`DEBUG_ADAPTER_ID_IS_TTY_SERIAL := 1`

boards/qn9080dk: New board for the QN908x The QN9080DK is the developer board reference from NXP for the QN908x CPUs. The developer kit comes with two boards: a larger PCB with many peripherals and a much smaller "USB dongle". This board adds initial support for the larger "DK board". At the moment, with the minimal CPU support this board only configures the GPIOs available in the board, namely the RGB LED and the two user buttons. 2020-11-29 00:44:15 +01:00			`# Include default QN908x board config`
			`include $(RIOTBOARD)/common/qn908x/Makefile.include`