RIOT/drivers/at86rf215/Makefile.dep

DEFAULT_MODULE += auto_init_at86rf215

ifneq (,$(filter at86rf215m,$(USEMODULE)))
  USEMODULE += at86rf215_subghz
endif

ifeq (,$(filter at86rf215_subghz at86rf215_24ghz,$(USEMODULE)))
  DEFAULT_MODULE += at86rf215_subghz
  DEFAULT_MODULE += at86rf215_24ghz
endif

ifneq (,$(filter at86rf215_batmon,$(USEMODULE)))
  USEMODULE += sys_bus_power
endif

DEFAULT_MODULE += netdev_ieee802154_multimode

DEFAULT_MODULE += netdev_ieee802154_oqpsk
DEFAULT_MODULE += netdev_ieee802154_mr_oqpsk
DEFAULT_MODULE += netdev_ieee802154_mr_ofdm
DEFAULT_MODULE += netdev_ieee802154_mr_fsk

FEATURES_REQUIRED += periph_gpio
FEATURES_REQUIRED += periph_gpio_irq
FEATURES_REQUIRED += periph_spi

USEMODULE += xtimer
USEMODULE += ieee802154
USEMODULE += netdev_ieee802154
USEMODULE += netdev_new_api
drivers: configure per driver dependency resolution 2020-06-26 21:55:37 +02:00			`DEFAULT_MODULE += auto_init_at86rf215`
drivers/at86rf215: fix dependency resolution for single radio Let the user chose `at86rf215_subghz`/`at86rf215_24ghz` if they only want a single radio. 2020-10-21 19:38:24 +02:00
drivers/at86rf215: fix dependency resolution for 2.4 GHz With the last cleanup an error sneaked in: Now the 2.4 GHz interface is disabled, when the `at86rf215m` module (chip with sub-GHz radio only) is not used. This is the reverse of what should happen. 2020-11-15 16:34:57 +01:00			`ifneq (,$(filter at86rf215m,$(USEMODULE)))`
drivers/at86rf215: fix dependency resolution for single radio Let the user chose `at86rf215_subghz`/`at86rf215_24ghz` if they only want a single radio. 2020-10-21 19:38:24 +02:00			`USEMODULE += at86rf215_subghz`
			`endif`

			`ifeq (,$(filter at86rf215_subghz at86rf215_24ghz,$(USEMODULE)))`
			`DEFAULT_MODULE += at86rf215_subghz`
			`DEFAULT_MODULE += at86rf215_24ghz`
			`endif`
drivers: configure per driver dependency resolution 2020-06-26 21:55:37 +02:00
drivers/at86rf215: implement Battery Monitor 2020-09-07 23:37:06 +02:00			`ifneq (,$(filter at86rf215_batmon,$(USEMODULE)))`
			`USEMODULE += sys_bus_power`
			`endif`

drivers: configure per driver dependency resolution 2020-06-26 21:55:37 +02:00			`DEFAULT_MODULE += netdev_ieee802154_multimode`

			`DEFAULT_MODULE += netdev_ieee802154_oqpsk`
			`DEFAULT_MODULE += netdev_ieee802154_mr_oqpsk`
			`DEFAULT_MODULE += netdev_ieee802154_mr_ofdm`
drivers/at86rf215: implement MR-FSK 2020-06-13 18:03:32 +02:00			`DEFAULT_MODULE += netdev_ieee802154_mr_fsk`
drivers: configure per driver dependency resolution 2020-06-26 21:55:37 +02:00
			`FEATURES_REQUIRED += periph_gpio`
			`FEATURES_REQUIRED += periph_gpio_irq`
			`FEATURES_REQUIRED += periph_spi`

			`USEMODULE += xtimer`
			`USEMODULE += ieee802154`
			`USEMODULE += netdev_ieee802154`
drivers/at86rf215: port to new netdev API 2024-05-15 17:23:52 +02:00			`USEMODULE += netdev_new_api`