RIOT/boards/nucleo-f446re/Makefile.features

CPU = stm32
CPU_MODEL = stm32f446re

# Put defined MCU peripherals here (in alphabetical order)
FEATURES_PROVIDED += periph_adc
FEATURES_PROVIDED += periph_dma
FEATURES_PROVIDED += periph_i2c
FEATURES_PROVIDED += periph_can
FEATURES_PROVIDED += periph_pwm
FEATURES_PROVIDED += periph_rtc
FEATURES_PROVIDED += periph_spi
FEATURES_PROVIDED += periph_timer
FEATURES_PROVIDED += periph_uart
FEATURES_PROVIDED += periph_qdec

# Various other features (if any)
FEATURES_PROVIDED += motor_driver
FEATURES_PROVIDED += riotboot

# load the common Makefile.features for Nucleo boards
include $(RIOTBOARD)/common/nucleo64/Makefile.features
boards/stm32*: adapt for new stm32 cpu organization 2020-05-03 14:35:32 +02:00			`CPU = stm32`
boards: move CPU/CPU_MODEL definition to Makefile.features cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are automatically included Part of moving CPU/CPU_MODEL definition to Makefile.features to have it available before Makefile.include. 2019-06-03 11:08:02 +02:00			`CPU_MODEL = stm32f446re`

boards/nucleo-f446: initial support 2016-07-29 10:16:59 +02:00			`# Put defined MCU peripherals here (in alphabetical order)`
board/nucleo-f446: add adc configuration 2017-06-23 16:39:31 +02:00			`FEATURES_PROVIDED += periph_adc`
nucleo-f446re: Add DMA config for SPI 2020-05-15 23:09:55 +02:00			`FEATURES_PROVIDED += periph_dma`
boards/nucleo-f446: initial support 2016-07-29 10:16:59 +02:00			`FEATURES_PROVIDED += periph_i2c`
boards: enable CAN bus on nucleo-f446re & nucleo-f446ze Changed the pinout for the CAN bus: CAN RX: PB8 CAN TX: PB9 And added periph_can to FEATURES_PROVIDED and to Kconfig files 2020-07-27 14:34:10 +02:00			`FEATURES_PROVIDED += periph_can`
boards/stm32-based: enabled RTC feature 2017-08-23 15:19:13 +02:00			`FEATURES_PROVIDED += periph_pwm`
			`FEATURES_PROVIDED += periph_rtc`
boards/nucleo-f446: initial support 2016-07-29 10:16:59 +02:00			`FEATURES_PROVIDED += periph_spi`
			`FEATURES_PROVIDED += periph_timer`
			`FEATURES_PROVIDED += periph_uart`
board/nucleo-f446: add qdec TIM3 now use for QDEC instead of PWM, TIM3 (PA6 & PA7 pins) and TIM4 (PB6 & PB7 pins) timers, Signed-off-by: Yannick Gicquel <ygicquel@gmail.com> 2018-02-24 18:13:32 +01:00			`FEATURES_PROVIDED += periph_qdec`
boards/nucleo-f446: initial support 2016-07-29 10:16:59 +02:00
boards/nucleo64: add motor driver Add motor_driver driver configuration example. The most simple motor driver type is used here (MOTOR_DRIVER_1_DIR) which needs only one pin to work. This example uses already configured PWM channels and 2 free GPIOS. Signed-off-by: Gilles DOFFE <g.doffe@gmail.com> 2018-10-14 20:50:09 +02:00			`# Various other features (if any)`
			`FEATURES_PROVIDED += motor_driver`
boards/nucleo-f446re: add riotboot 2019-06-11 09:41:13 +02:00			`FEATURES_PROVIDED += riotboot`
boards/nucleo64: add motor driver Add motor_driver driver configuration example. The most simple motor driver type is used here (MOTOR_DRIVER_1_DIR) which needs only one pin to work. This example uses already configured PWM channels and 2 free GPIOS. Signed-off-by: Gilles DOFFE <g.doffe@gmail.com> 2018-10-14 20:50:09 +02:00
boards/nucleo-common: provide arduino sketch feature to nucleo boards 2016-10-26 12:59:15 +02:00			`# load the common Makefile.features for Nucleo boards`
boards/nucleo: factored out nucleo64 common 2017-11-16 17:17:41 +01:00			`include $(RIOTBOARD)/common/nucleo64/Makefile.features`