mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
72 lines
2.2 KiB
Plaintext
72 lines
2.2 KiB
Plaintext
|
/**
|
||
|
|
@defgroup boards_adafruit-metro-m4-express Adafruit Metro M4 Express
|
||
|
|
@ingroup boards
|
||
|
|
@brief Support for the Adafruit Metro M4 Express
|
||
|
|
|
||
|
|
General information
|
||
|
|
===================
|
||
|
|
|
||
|
|
@image html https://cdn-learn.adafruit.com/assets/assets/000/085/521/large1024/adafruit_products_metro-m4-top.jpg "Picture of the Adafruit Metro M4 Express"
|
||
|
|
|
||
|
|
The main features of the board are:
|
||
|
|
- ATSAMD51 Cortex M4 running at 120 MHz
|
||
|
|
- Hardware DSP and floating point support
|
||
|
|
- 512 MiB Flash
|
||
|
|
- 192 KiB KiB RAM
|
||
|
|
- external 2 MiB QSPI Flash storage
|
||
|
|
- WS281x RGB LED (NeoPixel)
|
||
|
|
- 32-bit, 3.3V logic and power
|
||
|
|
- native USB
|
||
|
|
|
||
|
|
Pinout
|
||
|
|
------
|
||
|
|
|
||
|
|
@image html https://cdn-learn.adafruit.com/assets/assets/000/111/183/original/adafruit_products_Adafruit_Metro_M4_Express_Pinout.png "Official Pinout of the Metro M4 Express" width=100%
|
||
|
|
|
||
|
|
Links
|
||
|
|
=====
|
||
|
|
|
||
|
|
- [Official Board Documentation](https://learn.adafruit.com/adafruit-metro-m4-express-featuring-atsamd51)
|
||
|
|
|
||
|
|
Schematics
|
||
|
|
==========
|
||
|
|
|
||
|
|
@image html https://cdn-learn.adafruit.com/assets/assets/000/053/093/original/adafruit_products_schem.png "Original Board Schematics"
|
||
|
|
|
||
|
|
Arduino Compatibility
|
||
|
|
=====================
|
||
|
|
|
||
|
|
The board is compatible with Shields for the Arduino UNO / Arduino Zero.
|
||
|
|
|
||
|
|
@warning The SPI bus on D11/D12/D13 is only available when `periph_uart` is
|
||
|
|
not used, as this pins are connected to the same SERCOM peripheral.
|
||
|
|
This is board design flaw that we cannot work around unless
|
||
|
|
resorting to desperate means such as bit-banging either the SPI bus
|
||
|
|
or the UART interface.
|
||
|
|
|
||
|
|
Flash the board
|
||
|
|
===============
|
||
|
|
|
||
|
|
The board is flashed using its on-board
|
||
|
|
[boot loader](https://github.com/adafruit/uf2-samdx1).
|
||
|
|
|
||
|
|
The process is automated in the usual `make flash` target.
|
||
|
|
|
||
|
|
If RIOT is already running on the board, it will automatically reset the CPU
|
||
|
|
and enter the bootloader. If some other firmware is running or RIOT crashed,
|
||
|
|
you need to enter the bootloader manually by double tapping the board's reset
|
||
|
|
button.
|
||
|
|
|
||
|
|
Readiness of the bootloader is indicated by LED pulsing in red.
|
||
|
|
|
||
|
|
@note You may need to pass `MOST_RECENT_PORT=0` and manually pass the `PORT`
|
||
|
|
if you enter the bootloader by hand.
|
||
|
|
|
||
|
|
Accessing STDIO
|
||
|
|
---------------
|
||
|
|
|
||
|
|
The usual way to obtain a console on this board is using an emulated USB serial
|
||
|
|
port.
|
||
|
|
|
||
|
|
*/
|