RIOT/boards/esp32s2-lilygo-ttgo-t8/Kconfig

# Copyright (c) 2020 HAW Hamburg
#               2022 Gunar Schorcht
#
# This file is subject to the terms and conditions of the GNU Lesser
# General Public License v2.1. See the file LICENSE in the top level
# directory for more details.

config BOARD
    default "esp32s2-lilygo-ttgo-t8" if BOARD_ESP32S2_LILYGO_TTGO_T8

config BOARD_ESP32S2_LILYGO_TTGO_T8
    bool
    default y
    select BOARD_COMMON_ESP32S2
    select CPU_MODEL_ESP32S2
    select HAS_ARDUINO_PINS
    select HAS_ESP_RTC_TIMER_32K if ESP32S2_LILYGO_TTGO_T8_32K_XTAL
    select HAS_ESP_SPI_RAM
    select HAS_HIGHLEVEL_STDIO if ESP32S2_LILYGO_TTGO_T8_USB
    select HAS_PERIPH_ADC
    select HAS_PERIPH_DAC
    select HAS_PERIPH_I2C
    select HAS_PERIPH_PWM
    select HAS_PERIPH_SPI
    select HAS_PERIPH_USBDEV
    select HAS_SDCARD_SPI
    select HAS_TINYUSB_DEVICE
    select HAVE_MTD_SDCARD_DEFAULT
    select HAVE_ST7789
    select MODULE_FATFS_VFS if MODULE_VFS_DEFAULT

config FORCE_USB_STDIO
    default y if ESP32S2_LILYGO_TTGO_T8_USB

menu "LILYGO TTGO T8 ESP32-S2 Board configurations"
    depends on BOARD_ESP32S2_LILYGO_TTGO_T8

    config ESP32S2_LILYGO_TTGO_T8_USB
        bool "USB interface is used instead of USB-to-UART bridge"
        help
            The USB D-/D+ signals are connected via DIP switches either to the
            USB-to-UART bridge (default) or to GPIO19/GPIO20 of the ESP32-S2.
            To use the USB interface of the ESP32-S2, the USB D-/D+ signals
            must be connected to GPIO19 and GPIO20 and this option has to be
            enabled.

    config ESP32S2_LILYGO_TTGO_T8_32K_XTAL
        bool "32.768 kHz crystal is used"
        default y
        help
            GPIO15 and GPIO16 of the ESP32-S2 are connected via DIP switches
            either with the on-board 32.768 kHz crystal (default) or the
            according pins at the extension headers. If the pins at the
            extension headers are used instead, disable this option.

endmenu

source "$(RIOTBOARD)/common/esp32s2/Kconfig"
boards: add support for LILYGO TTGO T8 ESP32-S2 2023-02-17 17:40:46 +01:00			`# Copyright (c) 2020 HAW Hamburg`
			`# 2022 Gunar Schorcht`
			`#`
			`# This file is subject to the terms and conditions of the GNU Lesser`
			`# General Public License v2.1. See the file LICENSE in the top level`
			`# directory for more details.`

			`config BOARD`
			`default "esp32s2-lilygo-ttgo-t8" if BOARD_ESP32S2_LILYGO_TTGO_T8`

			`config BOARD_ESP32S2_LILYGO_TTGO_T8`
			`bool`
			`default y`
			`select BOARD_COMMON_ESP32S2`
			`select CPU_MODEL_ESP32S2`
boards,sys/arduino: major clean up - Rename all `arduino_pinmap.h` to `arduino_iomap.h` - An empty `arduino_pinmap.h` that just includes `arduino_iomap.h` is provided for backward compatibility - Move all info from `arduino_board.h` into the new file as trivial macros, so that they can also be used outside of sketches - The new name reflects the fact not just pin mappings, but also other I/O features such as PWMs are mapped - Drop all `arduino_board.h` - `arduino_board.h` and `arduino_iomap.h` now provide the exact same information, just in a different format - a generic `arduino_board.h` is provided instead that just uses the info in `arduinio_iomap.h` and provides them in the format the code in `sys/arduino` expects it - Add fine grained features to indicate for mappings - availability of mappings for analog pins, DAC pins, PWM pins, UART devices, SPI/I2C buses to the corresponding RIOT identification can now be expressed: - `arduino_pins`: `ARDUINO_PIN_0` etc. are available - `arduino_analog`: `ARDUINO_A0` etc. are available - `arduino_pwm`: `ARDUINO_PIN_13_PWM_DEV` etc. are available - `arduino_dac`: `ARDUINO_DAC0` etc. are available - `arduino_uart`: `ARDUINO_UART_D0D1` or similar are available - `arduino_spi`: `ARDUINO_SPI_ISP` or similar are available - `arduino_i2c`: `ARDUINO_I2C_UNO` or similar are available - mechanical/electrical compatibility with specific form factors can now be expressed as features: - `aruino_shield_nano`: Arduino NANO compatible headers - `aruino_shield_uno`: Arduino UNO compatible headers - `aruino_shield_mega`: Arduino MEGA compatible headers - `aruino_shield_isp`: ISP header is available This provides the groundwork to implement shield support as modules that can rely on the I/O mappings, rather than having to provide a configuration per board. 2023-06-23 15:42:08 +02:00			`select HAS_ARDUINO_PINS`
boards: add support for LILYGO TTGO T8 ESP32-S2 2023-02-17 17:40:46 +01:00			`select HAS_ESP_RTC_TIMER_32K if ESP32S2_LILYGO_TTGO_T8_32K_XTAL`
			`select HAS_ESP_SPI_RAM`
			`select HAS_HIGHLEVEL_STDIO if ESP32S2_LILYGO_TTGO_T8_USB`
			`select HAS_PERIPH_ADC`
			`select HAS_PERIPH_DAC`
			`select HAS_PERIPH_I2C`
			`select HAS_PERIPH_PWM`
			`select HAS_PERIPH_SPI`
			`select HAS_PERIPH_USBDEV`
			`select HAS_SDCARD_SPI`
			`select HAS_TINYUSB_DEVICE`
			`select HAVE_MTD_SDCARD_DEFAULT`
boards/esp32s2-lilygo-ttgo-t8: fix display config 2023-07-07 08:23:26 +02:00			`select HAVE_ST7789`
boards: add support for LILYGO TTGO T8 ESP32-S2 2023-02-17 17:40:46 +01:00			`select MODULE_FATFS_VFS if MODULE_VFS_DEFAULT`
boards/*: Model usb and stdio in Kconfig 2023-04-06 09:24:07 +02:00
			`config FORCE_USB_STDIO`
			`default y if ESP32S2_LILYGO_TTGO_T8_USB`
boards: add support for LILYGO TTGO T8 ESP32-S2 2023-02-17 17:40:46 +01:00
			`menu "LILYGO TTGO T8 ESP32-S2 Board configurations"`
			`depends on BOARD_ESP32S2_LILYGO_TTGO_T8`

			`config ESP32S2_LILYGO_TTGO_T8_USB`
			`bool "USB interface is used instead of USB-to-UART bridge"`
			`help`
			`The USB D-/D+ signals are connected via DIP switches either to the`
			`USB-to-UART bridge (default) or to GPIO19/GPIO20 of the ESP32-S2.`
			`To use the USB interface of the ESP32-S2, the USB D-/D+ signals`
			`must be connected to GPIO19 and GPIO20 and this option has to be`
			`enabled.`

			`config ESP32S2_LILYGO_TTGO_T8_32K_XTAL`
			`bool "32.768 kHz crystal is used"`
			`default y`
			`help`
			`GPIO15 and GPIO16 of the ESP32-S2 are connected via DIP switches`
			`either with the on-board 32.768 kHz crystal (default) or the`
			`according pins at the extension headers. If the pins at the`
			`extension headers are used instead, disable this option.`

			`endmenu`

			`source "$(RIOTBOARD)/common/esp32s2/Kconfig"`