RIOT/boards/waspmote-pro/Makefile.include

# define the cpu used by the waspmote pro board
export CPU = atmega1281

# Bootloader uses stk500v1 protocol, which usually is implemented in
# bootloaders of 2K size.
# http://www.libelium.com/products/waspmote/hardware/
BOOTLOADER_SIZE ?= 2K
ROM_RESERVED ?= $(BOOTLOADER_SIZE)

# configure the terminal program
PORT_LINUX  ?= /dev/ttyACM0
PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.usbserial*)))
BAUD        ?= 9600
include $(RIOTMAKE)/tools/serial.inc.mk

# PROGRAMMER defaults to stk500v1 which is the internal flasher via USB
# using avrdude. Can be overridden for debugging (which requires changes
# that require to use an ISP)
PROGRAMMER ?= stk500v1
# configure programmer speed in baud
FFLAGS_EXTRA += -b 115200
# avoid error if mcu signature doesn't match
FFLAGS_EXTRA += -F

include $(RIOTMAKE)/tools/avrdude.inc.mk
include $(RIOTBOARD)/common/atmega/Makefile.include
boards/waspmote-pro: add support for Waspmote PRO v1.2 2016-03-20 14:36:15 +01:00			`# define the cpu used by the waspmote pro board`
			`export CPU = atmega1281`

waspmote-pro: configure BOOTLOADER_SIZE Size is from Francisco knowledge on stk500v1. 2018-08-16 19:15:05 +02:00			`# Bootloader uses stk500v1 protocol, which usually is implemented in`
			`# bootloaders of 2K size.`
			`# http://www.libelium.com/products/waspmote/hardware/`
			`BOOTLOADER_SIZE ?= 2K`
			`ROM_RESERVED ?= $(BOOTLOADER_SIZE)`

boards: make use of `serial.inc.mk` 2017-05-18 15:46:38 +02:00			`# configure the terminal program`
			`PORT_LINUX ?= /dev/ttyACM0`
			`PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.usbserial*)))`
			`BAUD ?= 9600`
			`include $(RIOTMAKE)/tools/serial.inc.mk`

boards: leverage avrdude.inc.mk for atmega based boards. Additionally, it removes unnecessary exports and cleans up waspmote-pro toolchain variables (not needed) which are taken from atmega_common. 2018-05-15 02:31:33 +02:00			`# PROGRAMMER defaults to stk500v1 which is the internal flasher via USB`
			`# using avrdude. Can be overridden for debugging (which requires changes`
			`# that require to use an ISP)`
			`PROGRAMMER ?= stk500v1`
			`# configure programmer speed in baud`
			`FFLAGS_EXTRA += -b 115200`
			`# avoid error if mcu signature doesn't match`
			`FFLAGS_EXTRA += -F`
boards/waspmote-pro: add support for Waspmote PRO v1.2 2016-03-20 14:36:15 +01:00
boards: leverage avrdude.inc.mk for atmega based boards. Additionally, it removes unnecessary exports and cleans up waspmote-pro toolchain variables (not needed) which are taken from atmega_common. 2018-05-15 02:31:33 +02:00			`include $(RIOTMAKE)/tools/avrdude.inc.mk`
boards/common/atmega: Refactoring periph_conf.h - Moved code for periph_conf of all ATmega based boards to boards/common/atmega - Added possibility to override config from individual board: - Named file `periph_conf_atmega_common.h` and let this be included from `board/$BOARD/include/periph_conf.h` to allow modifications - Guarded individual periph configs by `#ifndef $PERIPH_NUMOF` ... `#endif` 2019-02-17 14:05:48 +01:00			`include $(RIOTBOARD)/common/atmega/Makefile.include`