RIOT/boards/openmote-cc2538/Makefile.include

# define the default port depending on the host OS
PORT_LINUX ?= /dev/ttyUSB0
PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.usbserial*)))

# setup serial terminal
include $(RIOTMAKE)/tools/serial.inc.mk
# Set default flash tool
export PROGRAMMER ?= cc2538-bsl

ifeq ($(PROGRAMMER),jlink)
  # setup JLink for flashing
  export JLINK_DEVICE := cc2538sf53
  export FLASH_ADDR := 0x200000
  export JLINK_IF := JTAG
  export TUI := 1
  include $(RIOTMAKE)/tools/jlink.inc.mk
else
  FLASHFILE ?= $(BINFILE)
  FLASHER = $(RIOTTOOLS)/cc2538-bsl/cc2538-bsl.py
  FFLAGS  = -p "$(PROG_DEV)" -e -w -v -b 460800 $(FLASHFILE)
endif
board: openmote: adapt to common board Makefile 2015-04-22 15:45:34 +02:00			`# define the default port depending on the host OS`
			`PORT_LINUX ?= /dev/ttyUSB0`
boards/*/Makefile.include: replace $(shell ls) by native Makefile functions 2016-02-13 21:51:08 +01:00			`PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.usbserial*)))`
boards: added support for OpenMote 2014-10-22 15:49:49 +02:00
boards: change PORT used for flash/debug/reset to PROG_DEV 2019-10-15 14:29:51 +02:00			`# setup serial terminal`
			`include $(RIOTMAKE)/tools/serial.inc.mk`
Support flashing openmote-cc2538 board via serial interface Enable directly from Makefile target 'flash' using cc2538-bsl script, and make this the default flashing method for this platform. 2015-12-10 05:22:39 +01:00			`# Set default flash tool`
			`export PROGRAMMER ?= cc2538-bsl`

			`ifeq ($(PROGRAMMER),jlink)`
			`# setup JLink for flashing`
			`export JLINK_DEVICE := cc2538sf53`
Openmote-cc2538: format flash start address as hex Declaring the address in decimal format meant that it was being interpreted as a decimal rather than hex address by the tooling and the intermediate bash arithmetic. This fixes that bug. 2019-03-19 15:44:25 +01:00			`export FLASH_ADDR := 0x200000`
Support flashing openmote-cc2538 board via serial interface Enable directly from Makefile target 'flash' using cc2538-bsl script, and make this the default flashing method for this platform. 2015-12-10 05:22:39 +01:00			`export JLINK_IF := JTAG`
boards/openmote-cc2538: Add RF driver as dependency for board 2016-07-08 03:59:20 +02:00			`export TUI := 1`
Makefiles: move to new directory /makefiles 2016-01-27 10:47:12 +01:00			`include $(RIOTMAKE)/tools/jlink.inc.mk`
Support flashing openmote-cc2538 board via serial interface Enable directly from Makefile target 'flash' using cc2538-bsl script, and make this the default flashing method for this platform. 2015-12-10 05:22:39 +01:00			`else`
boards/cc2538: use FLASHFILE for boards using cc2538-bsl.py Update to use FLASHFILE as file to be flashed on the board. 2018-12-19 18:57:00 +01:00			`FLASHFILE ?= $(BINFILE)`
boards/tools: remove exporting FLASHER/FFLAGS FLASHER and FFLAGS are evaluated by the main Makefile.include or by file included by it. Their value does not need to be exported. This will also prevent evaluating 'PORT' for FFLAGS when not needed. Testing ------- `git diff --word-diff` only reports `export` being removed. `git show --stat` reports `84 insertions(+), 84 deletions(-)` Which is the same amount as lines that where matching `export[[:blank::]]\+VARIABLE`. 2019-05-17 13:52:34 +02:00			`FLASHER = $(RIOTTOOLS)/cc2538-bsl/cc2538-bsl.py`
boards: change PORT used for flash/debug/reset to PROG_DEV 2019-10-15 14:29:51 +02:00			`FFLAGS = -p "$(PROG_DEV)" -e -w -v -b 460800 $(FLASHFILE)`
Support flashing openmote-cc2538 board via serial interface Enable directly from Makefile target 'flash' using cc2538-bsl script, and make this the default flashing method for this platform. 2015-12-10 05:22:39 +01:00			`endif`