RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2025-01-16 20:32:47 +01:00
Code Releases Activity
870f5a5a0b
RIOT/boards/iotlab-a8-m3/dist/openocd.cfg

9 lines
295 B
INI
Raw Normal View History

boards/iotlab-m3|a8: fix openocd configuration iotlab-m3 boards always ended up not being able to flash after time. This changes managed to fix and flash boards that where able to be flashed with the deprecated `ft2232` driver and not with the `ftdi` driver used in RIOT. It combines configuration from openocd, iot-lab, RIOT config and Alexandre Abadie feedback * http://repo.or.cz/openocd.git/blob/HEAD:/tcl/interface/ftdi/iotlab-usb.cfg * ftdi configuration * https://github.com/iot-lab/iot-lab-gateway/blob/2.4.1/gateway_code/static/iot-lab-m3.cfg * `trst_and_srst` config * Alexandre feedback and http://openocd.org/doc/html/Reset-Configuration.html * 'connect_assert_srst' reset configuration * it prevents errors in the output on first flash * should help on boards with invalid code * It was taken from what Alexandre found for board 'b-l072z-lrwan1' * It requires using '-c reset halt' instead of '-c halt' before debug * RIOT * Keep the `configure -rtos` auto
2018-04-18 17:54:07 +02:00
source [find interface/ftdi/iotlab-usb.cfg]
source [find target/stm32f1x.cfg]
boards/iotlab-a8-m3: initial implementation
2016-03-18 18:33:53 +01:00
boards/iotlab-m3|a8: fix openocd configuration iotlab-m3 boards always ended up not being able to flash after time. This changes managed to fix and flash boards that where able to be flashed with the deprecated `ft2232` driver and not with the `ftdi` driver used in RIOT. It combines configuration from openocd, iot-lab, RIOT config and Alexandre Abadie feedback * http://repo.or.cz/openocd.git/blob/HEAD:/tcl/interface/ftdi/iotlab-usb.cfg * ftdi configuration * https://github.com/iot-lab/iot-lab-gateway/blob/2.4.1/gateway_code/static/iot-lab-m3.cfg * `trst_and_srst` config * Alexandre feedback and http://openocd.org/doc/html/Reset-Configuration.html * 'connect_assert_srst' reset configuration * it prevents errors in the output on first flash * should help on boards with invalid code * It was taken from what Alexandre found for board 'b-l072z-lrwan1' * It requires using '-c reset halt' instead of '-c halt' before debug * RIOT * Keep the `configure -rtos` auto
2018-04-18 17:54:07 +02:00
# use combined on interfaces or targets that can't set TRST/SRST separately
# Using connect_assert_srst removes errors on first flash
reset_config trst_and_srst connect_assert_srst
boards/iotlab-a8-m3: initial implementation
2016-03-18 18:33:53 +01:00
cortex_m: Add debug symbols for OpenOCD/GDB thread support
2015-10-06 11:37:49 +02:00
$_TARGETNAME configure -rtos auto
Copy Permalink