RIOT/tests/drivers/tps6274x/README.md

## About
Tests the tps6274x step-down converter

## Usage
Build the test by using the `make BOARD=??? flash` command in the `test/driver_tps6274x/` folder.

## Results
The stepdown converter will step from 1.8V to 3.3V in 100mV steps.
Each voltage will be set for 3 seconds and can be measured at the VOUT Pin.
After 1 second also the LOAD output pin will be enabled for 2 seconds
until the next voltage is set.
drivers: Initial support for TPS6274x converter drivers/tps6274x: initial support step-down converter tests/driver_tps6274x: Added testcase for the step-down converter boards/jiminy-mega256rfr2: Added TPS6274x config 2017-11-02 15:48:54 +01:00			`## About`
			`Tests the tps6274x step-down converter`

			`## Usage`
			Build the test by using the `make BOARD=??? flash` command in the `test/driver_tps6274x/` folder.

			`## Results`
			`The stepdown converter will step from 1.8V to 3.3V in 100mV steps.`
			`Each voltage will be set for 3 seconds and can be measured at the VOUT Pin.`
			`After 1 second also the LOAD output pin will be enabled for 2 seconds`
many typo fixes Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com> 2019-09-14 15:47:10 +02:00			`until the next voltage is set.`