RIOT/boards/weact-g030f6/Makefile.include

# we use shared STM32 configuration snippets
INCLUDES += -I$(RIOTBASE)/boards/common/stm32/include

# setup programmer
PROGRAMMERS_SUPPORTED += openocd
PROGRAMMER ?= openocd
OPENOCD_DEBUG_ADAPTER ?= stlink
include $(RIOTMAKE)/tools/openocd.inc.mk

# setup serial terminal
PORT_LINUX ?= /dev/ttyACM0
PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.SLAB_USBtoUART*)))
include $(RIOTMAKE)/tools/serial.inc.mk
boards/weact-g030f6: add new board 2024-02-02 14:36:19 +01:00			`# we use shared STM32 configuration snippets`
			`INCLUDES += -I$(RIOTBASE)/boards/common/stm32/include`

boards/weact-g030f6: fix use with stdio_rtt Running USEMODULE=stdio_rtt make BOARD=weact-g030f6 -C ... flash term failed due the programmer not being specified by the time the serial is configured: makefiles/tools/serial.inc.mk:44: "Warning: No RIOT_TERMINAL set, but using stdio_rtt: The default terminal is likely not to work." This reorders the setup of the board to first configure the programmer and then the serial, so that using stdio_rtt now works out of the box. 2024-08-04 10:28:41 +02:00			`# setup programmer`
			`PROGRAMMERS_SUPPORTED += openocd`
boards/weact-g030f6: add new board 2024-02-02 14:36:19 +01:00			`PROGRAMMER ?= openocd`
			`OPENOCD_DEBUG_ADAPTER ?= stlink`
			`include $(RIOTMAKE)/tools/openocd.inc.mk`
boards/weact-g030f6: fix use with stdio_rtt Running USEMODULE=stdio_rtt make BOARD=weact-g030f6 -C ... flash term failed due the programmer not being specified by the time the serial is configured: makefiles/tools/serial.inc.mk:44: "Warning: No RIOT_TERMINAL set, but using stdio_rtt: The default terminal is likely not to work." This reorders the setup of the board to first configure the programmer and then the serial, so that using stdio_rtt now works out of the box. 2024-08-04 10:28:41 +02:00
			`# setup serial terminal`
			`PORT_LINUX ?= /dev/ttyACM0`
			`PORT_DARWIN ?= $(firstword $(sort $(wildcard /dev/tty.SLAB_USBtoUART*)))`
			`include $(RIOTMAKE)/tools/serial.inc.mk`