RIOT/boards/common/arduino-atmega/Makefile.features

# Put defined MCU peripherals here (in alphabetical order)
FEATURES_PROVIDED += periph_adc
FEATURES_PROVIDED += periph_gpio
FEATURES_PROVIDED += periph_i2c
FEATURES_PROVIDED += periph_spi
FEATURES_PROVIDED += periph_timer
FEATURES_PROVIDED += periph_uart

# Various other features (if any)
FEATURES_PROVIDED += arduino

# The board MPU family (used for grouping by the CI system)
FEATURES_MCU_GROUP = avr8
boards: add arduino uno and duemilanove support Uno and Duemilanove(atmega328p version) are nearly the same boards. The only difference is that the Duemilanove use an FTDI usb chip, while the Uno use an Atmel which acts as USB/Serial converter. All of the code needed to support these boards is in arduino-common. 2016-09-05 21:12:47 +02:00			`# Put defined MCU peripherals here (in alphabetical order)`
cpu/atmega_common: add adc driver 2017-02-15 21:28:10 +01:00			`FEATURES_PROVIDED += periph_adc`
boards: add arduino uno and duemilanove support Uno and Duemilanove(atmega328p version) are nearly the same boards. The only difference is that the Duemilanove use an FTDI usb chip, while the Uno use an Atmel which acts as USB/Serial converter. All of the code needed to support these boards is in arduino-common. 2016-09-05 21:12:47 +02:00			`FEATURES_PROVIDED += periph_gpio`
cpu/atmega_common: add i2c periph driver 2017-06-21 09:15:49 +02:00			`FEATURES_PROVIDED += periph_i2c`
boards: add arduino uno and duemilanove support Uno and Duemilanove(atmega328p version) are nearly the same boards. The only difference is that the Duemilanove use an FTDI usb chip, while the Uno use an Atmel which acts as USB/Serial converter. All of the code needed to support these boards is in arduino-common. 2016-09-05 21:12:47 +02:00			`FEATURES_PROVIDED += periph_spi`
			`FEATURES_PROVIDED += periph_timer`
			`FEATURES_PROVIDED += periph_uart`

			`# Various other features (if any)`
sys/arduino: make arduino sketch works on avr based boards 2016-10-24 11:01:48 +02:00			`FEATURES_PROVIDED += arduino`
boards: add arduino uno and duemilanove support Uno and Duemilanove(atmega328p version) are nearly the same boards. The only difference is that the Duemilanove use an FTDI usb chip, while the Uno use an Atmel which acts as USB/Serial converter. All of the code needed to support these boards is in arduino-common. 2016-09-05 21:12:47 +02:00
			`# The board MPU family (used for grouping by the CI system)`
			`FEATURES_MCU_GROUP = avr8`